Hi Champion, Thanks for the response - the situation is becoming clearer. On Fri, Jul 11, 2014 at 9:44 AM, 陈艳萍 <champion_chen@xxxxxxxxxxxxxx> wrote: > Hi Daniel, > The 8761 module used with different wifi chip can only be distinguished by pid, and do not support vendor command to get information from rom code. > The setup function only has hci_dev parameter . > we can add driver_info and set different setup funcitons. Will this be acceptable or do you have other suggestions? I will have to discuss this with Marcel. He was not so keen on this approach, but given that you have now clarified exactly what the situation is (thanks!), we will have to revisit. However, what is clear is that we will not add support for any hardware where we do not also submit the firmware to the linux-firmware git repository. At the moment we only have rtl8723a and 8723b firmware and configs: rtl8723a_fw: 24356 bytes md5sum b4a329212ab150b88c3c6ff4c42c51d6 rtl8723b_fw: 38976 bytes md5sum ebf894b7b91cbebce8aeb5ba63c22914 These can be found at https://github.com/lwfinger/rtl8723au_bt/tree/new We are missing all of the following: rtl8821a_fw rtl8761a_fw rtl8761au_fw rtl8761aw8192eu_fw rtl8761au8192ee_fw rtl8761au8812ae_fw rtl8761a_config rtl8821a_config Please could you send them over, and confirm that all are redistributable? About the config files, I am still not really clear if they are necessary. You say the hardware will use default settings if they are not provided. My RTL8723B does work fine without the config. What is the advantage of uploading these config files then, have you changed/improve the settings since production? Thanks Daniel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
