Hi Magnus, On Fri, May 23, 2014, Magnus Larsgården wrote: > The setup: > Raspberry Pi revB > OpenELEC 4.0.2 (Linux kernel 3.14.4) > > # /usr/lib/bluetooth/bluetoothd -v > 5.18 > > # bluetoothctl -v > 5.18 > > Bluetooth keyboard, Microsoft Wedge Keyboard > > > The problem: > The keyboard is detected, paired and connected, but after a couple of > seconds it gets disconnected. > > [bluetooth]# connect 7C:1E:52:18:7D:4F > Attempting to connect to 7C:1E:52:18:7D:4F > [CHG] Device 7C:1E:52:18:7D:4F Connected: yes > .... ~20 seconds pass..... > Failed to connect: org.bluez.Error.Failed > [CHG] Device 7C:1E:52:18:7D:4F Connected: no > > From bluetoothd: > > bluetoothd[513]: src/adapter.c:discovering_callback() hci0 type 1 discovering 0 > bluetoothd[513]: src/adapter.c:trigger_start_discovery() > bluetoothd[513]: 7C:1E:52:18:7D:4F: error updating services: > Input/output error (5) > bluetoothd[513]: src/device.c:device_svc_resolved() > /org/bluez/hci0/dev_7C_1E_52_18_7D_4F err -5 > bluetoothd[513]: src/adapter.c:dev_disconnected() Device > 7C:1E:52:18:7D:4F disconnected, reason 2 > bluetoothd[513]: src/adapter.c:adapter_remove_connection() > bluetoothd[513]: src/adapter.c:bonding_attempt_complete() hci0 bdaddr > 7C:1E:52:18:7D:4F type 0 status 0xe > bluetoothd[513]: src/device.c:device_bonding_complete() bonding (nil) > status 0x0e > bluetoothd[513]: src/device.c:device_bonding_failed() status 14 > bluetoothd[513]: src/adapter.c:resume_discovery() > > I would appreciate any help here. It would help analyze the issue if you could provide HCI-level logs for the disconnection. You can accomplish this by running btmon -w <filename> while performing the use case. Johan -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
