This patch introduces Get Connection Information command. --- v2: Changed Command name and add Flags into the response v3: Added TXPowerMax into the response based on the comments we got. v4: Fixed name to TX_Power_Max To read max TX Power we use same HCI command as for reading TX Power but with different type parameter. We will read it only once and then cache it in the connection. doc/mgmt-api.txt | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index cd5cd24..efd6395 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -1679,6 +1679,45 @@ Load Identity Resolving Keys Command Invalid Index +Get Connection Information Command +================================== + + Command Code: 0x0031 + Controller Index: <controller id> + Command Parameters: Address (6 Octets) + Address_Type (1 Octet) + Data_Type (4 Octet) + Return Parameters: Address (6 Octets) + Address_Type (1 Octet) + RSSI (1 Octet) + TXi_Power_Max (1 Octet) + Flags (4 Octets) + EIR_Data_Length (2 Octets) + EIR_Data (0-65535 Octets) + + This command is used to get connection information. + + Data_Type parameter is a bitmask with currently the following available + bits: + + 0 TX Power + + All the other bits are reserved and shall be set to 0. Unknown bits are + ignored. + + All the requested Data_Type information are returned in EIR_Data. + + Flags are reserved for the future use. + + This command generates a Command Complete event on success and + on failure. + + Possible errors: Not Connected + Not Powered + Invalid Parameters + Invalid Index + + Command Complete Event ====================== -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
