---
doc/mgmt-api.txt | 89 +++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 88 insertions(+), 1 deletion(-)
diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt
index 78f0bd2..a2c65db 100644
--- a/doc/mgmt-api.txt
+++ b/doc/mgmt-api.txt
@@ -995,7 +995,8 @@ Unpair Device Command
Return Parameters: Address (6 Octets)
Address_Type (1 Octet)
- Removes all keys associated with the remote device.
+ Removes all keys and connection parameters associated with the remote
+ device.
Possible values for the Address_Type parameter:
0 BR/EDR
@@ -1668,6 +1669,62 @@ Load Identity Resolving Keys Command
Invalid Index
+Load Connection Parameters Command
+====================================
+
+ Command Code: 0x0031
+ Controller Index: <controller id>
+ Command Parameters: Params_Count (2 Octets)
+ Params1 {
+ Address (6 Octets)
+ Address_Type (1 Octet)
+ Auto_Connect_Option (1 Octet)
+ Min_Connection_Interval (2 Octets)
+ Max_Connection_Interval (2 Octes)
+ Connection_Latency (2 Octets)
+ Supervision_Timeout (2 Octets)
+ }
+ Params2 { }
+ ...
+ Return Parameters:
+
+ This command is used load connection parameters from several LE devices
+ into kernel. It is only supported on controllers with LE support.
+
+ The provided Address and Address_Type are the identity of a device. So
+ either its public address or static random address. Unresolvable random
+ addresses and resolvable random addresses are not valid and will be
+ rejected.
+
+ Possible values for the Address_Type parameter:
+ 0 Reserved (not in use)
+ 1 LE Public
+ 2 LE Random
+
+ Possible values for the Auto_Connect_Option parameter:
+ 0 Disabled
+ 1 Always
+ 2 Link Loss
+
+ The 'Always' option configures the kernel to always re-establish the
+ connection, no matter the reason the connection was terminated. The
+ 'Link Loss' option configures the kernel to re-establish the connection
+ only in case the connection was terminated due to a link loss.
+
+ The Min_Connection_Interval, Max_Connection_Interval, Connection_Latency
+ and Supervision_Timeout parameters should be configured as described in
+ Core 4.1 spec, Vol 2, 7.8.12.
+
+ This command can be used when the controller is not powered.
+
+ This command generates a Command Complete event on success or
+ a Command Status event on failure.
+
+ Possible errors: Invalid Parameters
+ Invalid Index
+ Not Supported
+
+
Command Complete Event
======================
@@ -2257,3 +2314,33 @@ New Signature Resolving Key Event
The provided Address and Address_Type are the identity of
a device. So either its public address or static random address.
+
+
+New Connection Parameters Event
+===============================
+
+ Event Code: 0x001a
+ Controller Index: <controller id>
+ Event Parameters: Address (6 Octets)
+ Address_Type (1 Octet)
+ Connection_Interval (2 Octets)
+ Connection_Latency (2 Octets)
+ Supervision_Timeout (2 Octets)
+
+ This event indicates the new LE connection parameters set by GAP
+ Connection Parameter Update Procedure.
+
+ This event is sent only if the new parameters are different from the
+ parameters the user has configured (See Load Connection Parameters
+ Command) or if there is no parameters configured for that device.
+
+ Possible values for the Address_Type parameter:
+ 0 Reserved (not in use)
+ 1 LE Public
+ 2 LE Random
+
+ The provided Address and Address_Type are the identity of
+ a device. So either its public address or static random address.
+
+ The Connection_Interval, Connection_Latency and Supervision_Timeout
+ parameters are encoded as described in Core 4.1 spec, Vol 2, 7.7.65.3.
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
