Hi, On 28 March 2014 09:10, Lukasz Rymanowski <lukasz.rymanowski@xxxxxxxxx> wrote: > Two commands has been introduced: > Start Read Remote RSSI Command > Stop Read Remote RSSI Command > > And one Event: > Remote RSSI Changed Event > > Idea is that it is possible to start/stop read remote RSSI session > and register for RSSI Change event with given theshold. > This API gives a possibility to do one time RSSI read in case userspace > really needs that. I will send v3 as I have different idea. Basically we will let register for rssi also when device is not connected and maybe even when controller is powered off. Also will remove stop command and will reuse start command for stopping rssi > --- > doc/mgmt-api.txt | 82 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 82 insertions(+) > > diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt > index 78f0bd2..58b1ebe 100644 > --- a/doc/mgmt-api.txt > +++ b/doc/mgmt-api.txt > @@ -1668,6 +1668,58 @@ Load Identity Resolving Keys Command > Invalid Index > > > +Start Read Remote RSSI Command > +============================== > + > + Command Code: 0x0031 > + Controller Index: <controller id> > + Command Parameters: Address (6 Octets) > + Address_Type (1 Octet) > + Threshold (1 Octet) > + Return Parameters: Address (6 Octets) > + Address_Type (1 Octet) > + Current_RSSI (1 Octet) > + > + This command is used to start read remote rssi with given > + threshold. On this command current remote RSSI is read and > + is used as starting point for messurements. If threshold is > + exceeded then Remote RSSI Changed event is sent. > + > + If threshold is 0 then no Remote RSSI Changed event is generated but > + only Command Complete with current RSSI. > + > + This command can be used only when controller is powered on. > + > + This command generates a Command Complete event on success > + and on failure. > + > + Possible errors: Not Connected > + Invalid Parameters > + Not Powered > + Invalid Index > + > + > +Stop Read Remote RSSI Command > +============================= > + > + Command Code: 0x0032 > + Controller Index: <controller id> > + Command Parameters: Address (6 Octets) > + Adress_Type (1 Octet) > + > + Return Parametes: > + > + This command is used to stop read remote RSSI started with > + Start Read Remote RSSI command. > + > + This command generates Command Complete event on success > + and on failure. > + > + Possible errors: Rejected > + Invalid Parameters > + Invalid Index > + > + > Command Complete Event > ====================== > > @@ -2257,3 +2309,33 @@ New Signature Resolving Key Event > > The provided Address and Address_Type are the identity of > a device. So either its public address or static random address. > + > + > +Remote RSSI Changed Event > +========================= > + > + Event Code: 0x0020 > + Controller Index: <controller id> > + Event Parameters: Address (6 Octets) > + Address_Type (1 Octet) > + Active (1 Octet) > + RSSI (1 Octet) > + > + This event indicates that a remote RSSI has exceed threshold > + given on Start Read Remote RSSI command. > + > + Possible values for the Address_Type parameter: > + 0 BR/EDR > + 1 LE Public > + 2 LE Random > + > + The valid values for the Active parameter are 0x01 > + (RSSI read active) and 0x00 (RSSI read stopped). > + > + Possible RSSI values: > + BR/EDR > + Range: -128 <= N <= 127 (signed integer) > + Units: dB > + LE: > + Range: -127 to 20, 127 (signed integer) > + Units: dBm > -- > 1.8.4 > Lukasz -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
