[PATCH 4/4] Bluetooth: Add directed advertising support through connect()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Johan Hedberg <johan.hedberg@xxxxxxxxx>

When we're in peripheral mode (HCI_ADVERTISING flag is set) the most
natural mapping of connect() is to perform directed advertising to the
peer device.

This patch does the necessary changes to enable directed advertising and
keeps the hci_conn state as BT_CONNECT in a similar way as is done for
central or BR/EDR connection initiation.

Signed-off-by: Johan Hedberg <johan.hedberg@xxxxxxxxx>
---
 include/net/bluetooth/hci.h |  1 +
 net/bluetooth/hci_conn.c    | 75 ++++++++++++++++++++++++++++++++++++++++-----
 net/bluetooth/hci_event.c   | 17 ++++++++--
 3 files changed, 83 insertions(+), 10 deletions(-)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index be150cf8cd43..4261a67682c0 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -367,6 +367,7 @@ enum {
 #define HCI_ERROR_REMOTE_POWER_OFF	0x15
 #define HCI_ERROR_LOCAL_HOST_TERM	0x16
 #define HCI_ERROR_PAIRING_NOT_ALLOWED	0x18
+#define HCI_ERROR_ADVERTISING_TIMEOUT	0x3c
 
 /* Flow control modes */
 #define HCI_FLOW_CTL_MODE_PACKET_BASED	0x00
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index ef8a7394475a..65592a1f8316 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -367,9 +367,18 @@ static void le_conn_timeout(struct work_struct *work)
 {
 	struct hci_conn *conn = container_of(work, struct hci_conn,
 					     le_conn_timeout.work);
+	struct hci_dev *hdev = conn->hdev;
 
 	BT_DBG("");
 
+	if (test_bit(HCI_ADVERTISING, &hdev->dev_flags)) {
+		u8 enable = 0x00;
+		hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
+			     &enable);
+		hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
+		return;
+	}
+
 	hci_le_create_connection_cancel(conn);
 }
 
@@ -557,6 +566,11 @@ void hci_le_conn_failed(struct hci_conn *conn, u8 status)
 	 * favor of connection establishment, we should restart it.
 	 */
 	hci_update_background_scan(hdev);
+
+	/* Re-enable advertising in case this was a failed connection
+	 * attempt as a peripheral.
+	 */
+	mgmt_reenable_advertising(hdev);
 }
 
 static void create_le_conn_complete(struct hci_dev *hdev, u8 status)
@@ -617,6 +631,48 @@ static void hci_req_add_le_create_conn(struct hci_request *req,
 	conn->state = BT_CONNECT;
 }
 
+static void hci_req_directed_advertising(struct hci_request *req,
+					 struct hci_conn *conn)
+{
+	struct hci_dev *hdev = req->hdev;
+	struct hci_cp_le_set_adv_param cp;
+	u8 own_addr_type;
+	u8 enable;
+
+	enable = 0x00;
+	hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
+
+	/* Clear the HCI_ADVERTISING bit temporarily so that the
+	 * hci_update_random_address knows that it's safe to go ahead
+	 * and write a new random address. The flag will be set back on
+	 * as soon as the SET_ADV_ENABLE HCI command completes.
+	 */
+	clear_bit(HCI_ADVERTISING, &hdev->dev_flags);
+
+	/* Set require_privacy to false so that the remote device has a
+	 * chance of identifying us.
+	 */
+	if (hci_update_random_address(req, false, &own_addr_type) < 0)
+		return;
+
+	memset(&cp, 0, sizeof(cp));
+
+	cp.min_interval = cpu_to_le16(0x0800);
+	cp.max_interval = cpu_to_le16(0x0800);
+	cp.type = 0x01;
+	cp.own_address_type = own_addr_type;
+	cp.direct_addr_type = conn->dst_type;
+	bacpy(&cp.direct_addr, &conn->dst);
+	cp.channel_map = hdev->le_adv_channel_map;
+
+	hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
+
+	enable = 0x01;
+	hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
+
+	conn->state = BT_CONNECT;
+}
+
 struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 				u8 dst_type, u8 sec_level, u8 auth_type)
 {
@@ -626,9 +682,6 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 	struct hci_request req;
 	int err;
 
-	if (test_bit(HCI_ADVERTISING, &hdev->flags))
-		return ERR_PTR(-ENOTSUPP);
-
 	/* Some devices send ATT messages as soon as the physical link is
 	 * established. To be able to handle these ATT messages, the user-
 	 * space first establishes the connection and then starts the pairing
@@ -676,13 +729,20 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 		return ERR_PTR(-ENOMEM);
 
 	conn->dst_type = dst_type;
-
-	conn->out = true;
-	conn->link_mode |= HCI_LM_MASTER;
 	conn->sec_level = BT_SECURITY_LOW;
 	conn->pending_sec_level = sec_level;
 	conn->auth_type = auth_type;
 
+	hci_req_init(&req, hdev);
+
+	if (test_bit(HCI_ADVERTISING, &hdev->dev_flags)) {
+		hci_req_directed_advertising(&req, conn);
+		goto create_conn;
+	}
+
+	conn->out = true;
+	conn->link_mode |= HCI_LM_MASTER;
+
 	params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 	if (params) {
 		conn->le_conn_min_interval = params->conn_min_interval;
@@ -692,8 +752,6 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 		conn->le_conn_max_interval = hdev->le_conn_max_interval;
 	}
 
-	hci_req_init(&req, hdev);
-
 	/* If controller is scanning, we stop it since some controllers are
 	 * not able to scan and connect at the same time. Also set the
 	 * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
@@ -707,6 +765,7 @@ struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 
 	hci_req_add_le_create_conn(&req, conn);
 
+create_conn:
 	err = hci_req_run(&req, create_le_conn_complete);
 	if (err) {
 		hci_conn_del(conn);
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 810cdc759566..ce3c04d4d641 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -989,10 +989,23 @@ static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
 	if (!sent)
 		return;
 
+	if (status)
+		return;
+
 	hci_dev_lock(hdev);
 
-	if (!status)
-		mgmt_advertising(hdev, *sent);
+	/* Look for connection initation as peripheral */
+	if (*sent) {
+		struct hci_conn *conn;
+
+		conn = hci_conn_hash_lookup_state(hdev, LE_LINK, BT_CONNECT);
+		if (conn)
+			queue_delayed_work(hdev->workqueue,
+					   &conn->le_conn_timeout,
+					   HCI_LE_CONN_TIMEOUT);
+	}
+
+	mgmt_advertising(hdev, *sent);
 
 	hci_dev_unlock(hdev);
 }
-- 
1.8.5.3

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux