Hi Marcel,
sorry for the messed up tabs.
Here is /sys/kernel/debug/usb/devices:
T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0b05 ProdID=17d0 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
An again the patch.
Best wishes,
Bela
This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
Signed-off-by: Bela Hausmann <bela.hausmann@xxxxxxxxx>
---
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
--- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
@@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0cf3, 0xe003) },
+ { USB_DEVICE(0x0b05, 0x17d0) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -140,6 +141,7 @@ static const struct usb_device_id ath3k_
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 },
diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/btusb.c linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c
--- linux-3.13.5-gentoo/drivers/bluetooth/btusb.c 2014-01-20 03:40:07.000000000 +0100
+++ linux-3.13.5-gentoo-bela/drivers/bluetooth/btusb.c 2014-02-27 20:10:20.825905643 +0100
@@ -164,6 +164,7 @@ static const struct usb_device_id blackl
{ USB_DEVICE(0x13d3, 0x3402), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
On 27/02/14 23:43, Marcel Holtmann wrote:
> Hi Bela,
>
>> This adds support for the Atheros AR3012 chipset on the ASUS Z87-Pro (C2) mainboard (ID 0x0b05:0x17d0).
>
> include the content of /sys/kernel/debug/usb/devices for this controller.
>
>>
>> Signed-off-by: Bela Hausmann <bela.hausmann@xxxxxxxxx>
>> ---
>> diff -uprN -X linux-3.13.5-gentoo/Documentation/dontdiff linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c
>> --- linux-3.13.5-gentoo/drivers/bluetooth/ath3k.c 2014-01-20 03:40:07.000000000 +0100
>> +++ linux-3.13.5-gentoo-bela/drivers/bluetooth/ath3k.c 2014-02-27 20:09:33.047878117 +0100
>> @@ -97,6 +97,7 @@ static const struct usb_device_id ath3k_
>> { USB_DEVICE(0x13d3, 0x3402) },
>> { USB_DEVICE(0x0cf3, 0x3121) },
>> { USB_DEVICE(0x0cf3, 0xe003) },
>> + { USB_DEVICE(0x0b05, 0x17d0) },
>
> Make sure that you email client does not screw up tabs. This looks pretty much like it is messed up.
>
> Regards
>
> Marcel
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
