This adds create bond with PIN fail test case.
---
android/android-tester.c | 73 ++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/android/android-tester.c b/android/android-tester.c
index cb08ec1..4db5722 100644
--- a/android/android-tester.c
+++ b/android/android-tester.c
@@ -1037,6 +1037,21 @@ static void bond_device_found_cb(int num_properties, bt_property_t *properties)
}
}
+static void bond_nostatus_device_found_cb(int num_properties,
+ bt_property_t *properties)
+{
+ struct test_data *data = tester_get_data();
+ uint8_t *bdaddr = (uint8_t *)hciemu_get_client_bdaddr(data->hciemu);
+ bt_bdaddr_t remote_addr;
+
+ bdaddr2android((const bdaddr_t *)bdaddr, &remote_addr.address);
+
+ if (data->cb_count == 4) {
+ data->cb_count--;
+ data->if_bluetooth->create_bond(&remote_addr);
+ }
+}
+
static gboolean device_found(gpointer user_data)
{
struct test_data *data = tester_get_data();
@@ -1236,6 +1251,21 @@ static void bond_create_pin_success_request_cb(bt_bdaddr_t *remote_bd_addr,
data->if_bluetooth->pin_reply(bdaddr, TRUE, pin_len, &pin_code);
}
+static void bond_create_pin_fail_request_cb(bt_bdaddr_t *remote_bd_addr,
+ bt_bdname_t *bd_name, uint32_t cod)
+{
+ struct test_data *data = tester_get_data();
+ const bt_bdaddr_t *bdaddr = remote_bd_addr;
+ bt_pin_code_t pin_code = {
+ .pin = { 0x31, 0x31, 0x31, 0x31 },
+ };
+ uint8_t pin_len = 4;
+
+ data->cb_count--;
+
+ data->if_bluetooth->pin_reply(bdaddr, TRUE, pin_len, &pin_code);
+}
+
static gboolean pin_request(gpointer user_data)
{
struct test_data *data = tester_get_data();
@@ -2292,6 +2322,14 @@ static const struct generic_data bt_bond_create_pin_success_test = {
.expected_adapter_status = BT_STATUS_SUCCESS,
};
+static const struct generic_data bt_bond_create_pin_fail_test = {
+ .expected_hal_cb.device_found_cb = bond_nostatus_device_found_cb,
+ .expected_hal_cb.bond_state_changed_cb = bond_test_state_changed_cb,
+ .expected_hal_cb.pin_request_cb = bond_create_pin_fail_request_cb,
+ .expected_cb_count = 4,
+ .expected_adapter_status = MGMT_STATUS_AUTH_FAILED,
+};
+
static bt_callbacks_t bt_callbacks = {
.size = sizeof(bt_callbacks),
.adapter_state_changed_cb = adapter_state_changed_cb,
@@ -3030,6 +3068,16 @@ static void test_dev_setprop_disctimeout_fail(const void *test_data)
data->if_bluetooth->start_discovery();
}
+
+static void bond_device_auth_fail_callback(uint16_t index, uint16_t length,
+ const void *param,
+ void *user_data)
+{
+ const struct mgmt_ev_auth_failed *ev = param;
+
+ check_expected_status(ev->status);
+}
+
static void test_bond_create_pin_success(const void *test_data)
{
struct test_data *data = tester_get_data();
@@ -3046,6 +3094,26 @@ static void test_bond_create_pin_success(const void *test_data)
data->if_bluetooth->start_discovery();
}
+static void test_bond_create_pin_fail(const void *test_data)
+{
+ struct test_data *data = tester_get_data();
+ struct bthost *bthost = hciemu_client_get_host(data->hciemu);
+
+ static uint8_t pair_device_pin[] = { 0x30, 0x30, 0x30, 0x30 };
+ const void *pin = pair_device_pin;
+ uint8_t pin_len = 4;
+
+ init_test_conditions(data);
+
+ mgmt_register(data->mgmt, MGMT_EV_AUTH_FAILED, data->mgmt_index,
+ bond_device_auth_fail_callback, data,
+ NULL);
+
+ bthost_set_pin_code(bthost, pin, pin_len);
+
+ data->if_bluetooth->start_discovery();
+}
+
/* Test Socket HAL */
static gboolean adapter_socket_state_changed(gpointer user_data)
@@ -4389,6 +4457,11 @@ int main(int argc, char *argv[])
setup_enabled_adapter,
test_bond_create_pin_success, teardown);
+ test_bredrle("Bluetooth Create Bond PIN - Bad PIN",
+ &bt_bond_create_pin_fail_test,
+ setup_enabled_adapter,
+ test_bond_create_pin_fail, teardown);
+
test_bredrle("Socket Init", NULL, setup_socket_interface,
test_dummy, teardown);
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
