Hi Andrezj,
>>> ---
>>> android/hal-audio.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 72 insertions(+)
>>>
>>> diff --git a/android/hal-audio.c b/android/hal-audio.c
>>> index f53dba0..e5c646c 100644
>>> --- a/android/hal-audio.c
>>> +++ b/android/hal-audio.c
>>> @@ -32,6 +32,7 @@
>>> #include "hal-log.h"
>>> #include "hal-msg.h"
>>> #include "../profiles/audio/a2dp-codecs.h"
>>> +#include <sbc/sbc.h>
>>>
>>> static const uint8_t a2dp_src_uuid[] = {
>>> 0x00, 0x00, 0x11, 0x0a, 0x00, 0x00, 0x10, 0x00,
>>> @@ -53,6 +54,8 @@ struct audio_input_config {
>>>
>>> struct sbc_data {
>>> a2dp_sbc_t sbc;
>>> +
>>> + sbc_t enc;
>>> };
>>>
>>> static int sbc_get_presets(struct audio_preset *preset, size_t *len);
>>> @@ -184,6 +187,70 @@ static int sbc_get_presets(struct audio_preset *preset, size_t *len)
>>> return i;
>>> }
>>>
>>> +static void sbc_init_encoder(struct sbc_data *sbc_data)
>>> +{
>>> + a2dp_sbc_t *in = &sbc_data->sbc;
>>> + sbc_t *out = &sbc_data->enc;
>>> +
>>> + DBG("");
>>> +
>>> + sbc_init(out, 0L);
>>> +
>>> + switch (in->frequency) {
>>> + case SBC_SAMPLING_FREQ_16000:
>>> + out->frequency = SBC_FREQ_16000;
>>> + break;
>>> + case SBC_SAMPLING_FREQ_32000:
>>> + out->frequency = SBC_FREQ_32000;
>>> + break;
>>> + case SBC_SAMPLING_FREQ_44100:
>>> + out->frequency = SBC_FREQ_44100;
>>> + break;
>>> + case SBC_SAMPLING_FREQ_48000:
>>> + out->frequency = SBC_FREQ_48000;
>>> + break;
>>> + }
>>> +
>>> + out->subbands = in->subbands == SBC_SUBBANDS_4 ? SBC_SB_4 : SBC_SB_8;
>>> +
>>> + switch (in->channel_mode) {
>>> + case SBC_CHANNEL_MODE_MONO:
>>> + out->mode = SBC_MODE_MONO;
>>> + break;
>>> + case SBC_CHANNEL_MODE_DUAL_CHANNEL:
>>> + out->mode = SBC_MODE_DUAL_CHANNEL;
>>> + break;
>>> + case SBC_CHANNEL_MODE_JOINT_STEREO:
>>> + out->mode = SBC_MODE_JOINT_STEREO;
>>> + break;
>>> + case SBC_CHANNEL_MODE_STEREO:
>>> + out->mode = SBC_MODE_STEREO;
>>> + break;
>>> + }
>>> +
>>> + out->endian = SBC_LE;
>>> +
>>> + out->bitpool = in->max_bitpool;
>>> +
>>> + out->allocation = in->allocation_method == SBC_ALLOCATION_SNR ?
>>> + SBC_AM_SNR : SBC_AM_LOUDNESS;
>>> +
>>> + switch (in->block_length) {
>>> + case SBC_BLOCK_LENGTH_4:
>>> + out->blocks = SBC_BLK_4;
>>> + break;
>>> + case SBC_BLOCK_LENGTH_8:
>>> + out->blocks = SBC_BLK_8;
>>> + break;
>>> + case SBC_BLOCK_LENGTH_12:
>>> + out->blocks = SBC_BLK_12;
>>> + break;
>>> + case SBC_BLOCK_LENGTH_16:
>>> + out->blocks = SBC_BLK_16;
>>> + break;
>>> + }
>>
>> aren’t the values all the same? This looks pretty complicated for something that should be dead simple. Does Android really had to duplicate every single definition with the same prefix?
>
> Actually symbols for 'in' come from a2dp-codecs.h and 'out' from sbc.h
> ;-) And they have different values since A2DP uses shifted-bit values
> while sbc.h are just ordinal values so cannot assign them directly.
so this a problem we created by ourselves. Yeah. Seems no cookie for me tonight ;)
We need to start fixing a2dp-codecs.h then and prefix it with A2DP. This current situation is bad. Luiz?
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
