[PATCH 1/6] android/tester: Seperate Socket HAL cbs from Bluetooth HAL cb

[Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@xxxxxxxxx>]

This patch adds seperate callbacks structure for socket HAL test cases.
Is's needed beceause Socket HAL cb have other purpose than Bluetooth HAL
cb. Callbacks are now initialized outside test setup function and
cb struct depends on HAL type.
---
 android/android-tester.c | 63 ++++++++++++++++++++++++++++++++++++++++++------
 1 file changed, 56 insertions(+), 7 deletions(-)

diff --git a/android/android-tester.c b/android/android-tester.c
index 2d1ffde..701ffd2 100644
--- a/android/android-tester.c
+++ b/android/android-tester.c
@@ -869,7 +869,6 @@ static void setup(struct test_data *data)
 {
 	const hw_module_t *module;
 	hw_device_t *device;
-	bt_status_t status;
 	int signal_fd[2];
 	char buf[1024];
 	pid_t pid;
@@ -932,19 +931,21 @@ static void setup(struct test_data *data)
 		return;
 	}
 
-	status = data->if_bluetooth->init(&bt_callbacks);
-	if (status != BT_STATUS_SUCCESS) {
-		data->if_bluetooth = NULL;
-		tester_setup_failed();
-	}
 }
 
 static void setup_base(const void *test_data)
 {
 	struct test_data *data = tester_get_data();
+	bt_status_t status;
 
 	setup(data);
 
+	status = data->if_bluetooth->init(&bt_callbacks);
+	if (status != BT_STATUS_SUCCESS) {
+		data->if_bluetooth = NULL;
+		tester_setup_failed();
+	}
+
 	tester_setup_complete();
 }
 
@@ -955,6 +956,11 @@ static void setup_enabled_adapter(const void *test_data)
 
 	setup(data);
 
+	status = data->if_bluetooth->init(&bt_callbacks);
+	if (status != BT_STATUS_SUCCESS) {
+		data->if_bluetooth = NULL;
+		tester_setup_failed();
+	}
 	status = data->if_bluetooth->enable();
 	if (status != BT_STATUS_SUCCESS)
 		tester_setup_failed();
@@ -1154,6 +1160,20 @@ static void test_setprop_service_record_invalid(const void *test_data)
 
 /* Test Socket HAL */
 
+static void adapter_socket_state_changed_cb(bt_state_t state)
+{
+	switch (state) {
+	case BT_STATE_ON:
+		setup_powered_emulated_remote();
+		break;
+	case BT_STATE_OFF:
+		tester_setup_failed();
+		break;
+	default:
+		break;
+	}
+}
+
 const bt_bdaddr_t bdaddr_dummy = {
 	.address = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55}
 };
@@ -1230,13 +1250,36 @@ static const struct socket_data btsock_inv_listen_listen = {
 	.test_channel = true,
 };
 
+static bt_callbacks_t bt_socket_callbacks = {
+	.size = sizeof(bt_callbacks),
+	.adapter_state_changed_cb = adapter_socket_state_changed_cb,
+	.adapter_properties_cb = NULL,
+	.remote_device_properties_cb = NULL,
+	.device_found_cb = NULL,
+	.discovery_state_changed_cb = NULL,
+	.pin_request_cb = NULL,
+	.ssp_request_cb = NULL,
+	.bond_state_changed_cb = NULL,
+	.acl_state_changed_cb = NULL,
+	.thread_evt_cb = NULL,
+	.dut_mode_recv_cb = NULL,
+	.le_test_mode_cb = NULL
+};
+
 static void setup_socket_interface(const void *test_data)
 {
 	struct test_data *data = tester_get_data();
+	bt_status_t status;
 	const void *sock;
 
 	setup(data);
 
+	status = data->if_bluetooth->init(&bt_socket_callbacks);
+	if (status != BT_STATUS_SUCCESS) {
+		data->if_bluetooth = NULL;
+		tester_setup_failed();
+	}
+
 	sock = data->if_bluetooth->get_profile_interface(BT_PROFILE_SOCKETS_ID);
 	if (!sock) {
 		tester_setup_failed();
@@ -1251,11 +1294,17 @@ static void setup_socket_interface(const void *test_data)
 static void setup_socket_interface_enabled(const void *test_data)
 {
 	struct test_data *data = tester_get_data();
-	const void *sock;
 	bt_status_t status;
+	const void *sock;
 
 	setup(data);
 
+	status = data->if_bluetooth->init(&bt_socket_callbacks);
+	if (status != BT_STATUS_SUCCESS) {
+		data->if_bluetooth = NULL;
+		tester_setup_failed();
+	}
+
 	sock = data->if_bluetooth->get_profile_interface(BT_PROFILE_SOCKETS_ID);
 	if (!sock) {
 		tester_setup_failed();
-- 
1.8.4.2

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html