Hi, this is 6LoWPAN code for BT LE as described in http://tools.ietf.org/html/draft-ietf-6lo-btle-00 v8: - misc changes to patches 4 and 5 according to Marcel's comments - added Alex's Acked-by to patch 1 v7: - rebased on top of current bluetooth - David Miller acked the patches 2 and 3 so adding Acked-by to those two patches v6: - Common IP header compression code for IEEE 802154 and Bluetooth moved to net/ieee802154/6lowpan_iphc.c. This is in patch 1 which is also sent separately to netdev ml. - New ARPHRD type in patches 2 and 3 are also sent to netdev ml. - fixes when counting number of 6lowpan peers (was not atomic) v5: - Moved the header compression functionality to net/core/6lowpan.c and rebased both BT and IEEE 802154 code to use it in patch 1. I will send a separate patch to net-next for comments. - locking fixes - debugfs handling moved to hci_core.c - misc changes according to Marcel's comments v4: - removed the route setting code, neighbour discovery should allow the devices to discover each other - fix the uncompression of Traffic Class in IPv6 header, this makes ssh to work between devices over a BT 6lowpan link - removed setting of /proc conf options, they were useless and not to be done in kernel module anyway v3: - misc changes according to Marcel's comments - supports multiple connections / interface - removed unused fragmentation code - setup 6lowpan connection automatically if enabled via debugfs The automatic 6lowpan enabling is done by setting echo 1 > /sys/kernel/debug/bluetooth/hci0/6lowpan before devices are connected. v2: - Change ARPHRD_IEEE802154 to ARPHRD_RAWIP. The generic code in patches 1 and 2 is also sent to netdev mailing list. - Sending route exporting patch 5 to netdev ml - Check private/public BT address and toggle universal/local bit accordingly in patch 3. - The virtual interface template name is now shorter (bt%d) - Various function name renames - devtype of the interface set to "bluetooth" v1: - initial release TODO: - Discovery of 6LoWPAN service needs be automatic (UUID support) - Enable/disable header compression for easier debugging Known issues: - no UUID handling yet Cheers, Jukka Jukka Rissanen (5): 6lowpan: Moving generic compression code into 6lowpan_iphc.c net: if_arp: add ARPHRD_6LOWPAN type ipv6: Add checks for 6LOWPAN ARP type Bluetooth: Enable 6LoWPAN support for BT LE devices Bluetooth: Manually enable or disable 6LoWPAN between devices include/net/bluetooth/hci.h | 1 + include/net/bluetooth/hci_core.h | 1 + include/net/bluetooth/l2cap.h | 1 + include/uapi/linux/if_arp.h | 1 + net/bluetooth/6lowpan.c | 880 +++++++++++++++++++++++++++++++++++++++ net/bluetooth/6lowpan.h | 26 ++ net/bluetooth/Makefile | 6 +- net/bluetooth/hci_core.c | 88 ++++ net/bluetooth/hci_event.c | 3 + net/bluetooth/l2cap_core.c | 12 + net/ieee802154/6lowpan.c | 753 ++------------------------------- net/ieee802154/6lowpan.h | 32 ++ net/ieee802154/6lowpan_iphc.c | 807 +++++++++++++++++++++++++++++++++++ net/ieee802154/Makefile | 2 +- net/ipv6/addrconf.c | 4 +- 15 files changed, 1896 insertions(+), 721 deletions(-) create mode 100644 net/bluetooth/6lowpan.c create mode 100644 net/bluetooth/6lowpan.h create mode 100644 net/ieee802154/6lowpan_iphc.c -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
