From: Luiz Augusto von Dentz <luiz.von.dentz@xxxxxxxxx> --- android/hardware/hardware.h | 227 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 227 insertions(+) create mode 100644 android/hardware/hardware.h diff --git a/android/hardware/hardware.h b/android/hardware/hardware.h new file mode 100644 index 0000000..c7e8cc7 --- /dev/null +++ b/android/hardware/hardware.h @@ -0,0 +1,227 @@ +/* + * Copyright (C) 2008 The Android Open Source Project + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#ifndef ANDROID_INCLUDE_HARDWARE_HARDWARE_H +#define ANDROID_INCLUDE_HARDWARE_HARDWARE_H + +#include <stdint.h> +#include <sys/cdefs.h> + +__BEGIN_DECLS + +/* + * Value for the hw_module_t.tag field + */ + +#define MAKE_TAG_CONSTANT(A,B,C,D) (((A) << 24) | ((B) << 16) | ((C) << 8) | (D)) + +#define HARDWARE_MODULE_TAG MAKE_TAG_CONSTANT('H', 'W', 'M', 'T') +#define HARDWARE_DEVICE_TAG MAKE_TAG_CONSTANT('H', 'W', 'D', 'T') + +#define HARDWARE_MAKE_API_VERSION(maj,min) \ + ((((maj) & 0xff) << 8) | ((min) & 0xff)) + +#define HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) \ + ((((maj) & 0xff) << 24) | (((min) & 0xff) << 16) | ((hdr) & 0xffff)) +#define HARDWARE_API_VERSION_2_MAJ_MIN_MASK 0xffff0000 +#define HARDWARE_API_VERSION_2_HEADER_MASK 0x0000ffff + + +/* + * The current HAL API version. + * + * All module implementations must set the hw_module_t.hal_api_version field + * to this value when declaring the module with HAL_MODULE_INFO_SYM. + * + * Note that previous implementations have always set this field to 0. + * Therefore, libhardware HAL API will always consider versions 0.0 and 1.0 + * to be 100% binary compatible. + * + */ +#define HARDWARE_HAL_API_VERSION HARDWARE_MAKE_API_VERSION(1, 0) + +/* + * Helper macros for module implementors. + * + * The derived modules should provide convenience macros for supported + * versions so that implementations can explicitly specify module/device + * versions at definition time. + * + * Use this macro to set the hw_module_t.module_api_version field. + */ +#define HARDWARE_MODULE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) +#define HARDWARE_MODULE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) + +/* + * Use this macro to set the hw_device_t.version field + */ +#define HARDWARE_DEVICE_API_VERSION(maj,min) HARDWARE_MAKE_API_VERSION(maj,min) +#define HARDWARE_DEVICE_API_VERSION_2(maj,min,hdr) HARDWARE_MAKE_API_VERSION_2(maj,min,hdr) + +struct hw_module_t; +struct hw_module_methods_t; +struct hw_device_t; + +/** + * Every hardware module must have a data structure named HAL_MODULE_INFO_SYM + * and the fields of this data structure must begin with hw_module_t + * followed by module specific information. + */ +typedef struct hw_module_t { + /** tag must be initialized to HARDWARE_MODULE_TAG */ + uint32_t tag; + + /** + * The API version of the implemented module. The module owner is + * responsible for updating the version when a module interface has + * changed. + * + * The derived modules such as gralloc and audio own and manage this field. + * The module user must interpret the version field to decide whether or + * not to inter-operate with the supplied module implementation. + * For example, SurfaceFlinger is responsible for making sure that + * it knows how to manage different versions of the gralloc-module API, + * and AudioFlinger must know how to do the same for audio-module API. + * + * The module API version should include a major and a minor component. + * For example, version 1.0 could be represented as 0x0100. This format + * implies that versions 0x0100-0x01ff are all API-compatible. + * + * In the future, libhardware will expose a hw_get_module_version() + * (or equivalent) function that will take minimum/maximum supported + * versions as arguments and would be able to reject modules with + * versions outside of the supplied range. + */ + uint16_t module_api_version; +#define version_major module_api_version + /** + * version_major/version_minor defines are supplied here for temporary + * source code compatibility. They will be removed in the next version. + * ALL clients must convert to the new version format. + */ + + /** + * The API version of the HAL module interface. This is meant to + * version the hw_module_t, hw_module_methods_t, and hw_device_t + * structures and definitions. + * + * The HAL interface owns this field. Module users/implementations + * must NOT rely on this value for version information. + * + * Presently, 0 is the only valid value. + */ + uint16_t hal_api_version; +#define version_minor hal_api_version + + /** Identifier of module */ + const char *id; + + /** Name of this module */ + const char *name; + + /** Author/owner/implementor of the module */ + const char *author; + + /** Modules methods */ + struct hw_module_methods_t* methods; + + /** module's dso */ + void* dso; + + /** padding to 128 bytes, reserved for future use */ + uint32_t reserved[32-7]; + +} hw_module_t; + +typedef struct hw_module_methods_t { + /** Open a specific device */ + int (*open)(const struct hw_module_t* module, const char* id, + struct hw_device_t** device); + +} hw_module_methods_t; + +/** + * Every device data structure must begin with hw_device_t + * followed by module specific public methods and attributes. + */ +typedef struct hw_device_t { + /** tag must be initialized to HARDWARE_DEVICE_TAG */ + uint32_t tag; + + /** + * Version of the module-specific device API. This value is used by + * the derived-module user to manage different device implementations. + * + * The module user is responsible for checking the module_api_version + * and device version fields to ensure that the user is capable of + * communicating with the specific module implementation. + * + * One module can support multiple devices with different versions. This + * can be useful when a device interface changes in an incompatible way + * but it is still necessary to support older implementations at the same + * time. One such example is the Camera 2.0 API. + * + * This field is interpreted by the module user and is ignored by the + * HAL interface itself. + */ + uint32_t version; + + /** reference to the module this device belongs to */ + struct hw_module_t* module; + + /** padding reserved for future use */ + uint32_t reserved[12]; + + /** Close this device */ + int (*close)(struct hw_device_t* device); + +} hw_device_t; + +/** + * Name of the hal_module_info + */ +#define HAL_MODULE_INFO_SYM HMI + +/** + * Name of the hal_module_info as a string + */ +#define HAL_MODULE_INFO_SYM_AS_STR "HMI" + +/** + * Get the module info associated with a module by id. + * + * @return: 0 == success, <0 == error and *module == NULL + */ +int hw_get_module(const char *id, const struct hw_module_t **module); + +/** + * Get the module info associated with a module instance by class 'class_id' + * and instance 'inst'. + * + * Some modules types necessitate multiple instances. For example audio supports + * multiple concurrent interfaces and thus 'audio' is the module class + * and 'primary' or 'a2dp' are module interfaces. This implies that the files + * providing these modules would be named audio.primary.<variant>.so and + * audio.a2dp.<variant>.so + * + * @return: 0 == success, <0 == error and *module == NULL + */ +int hw_get_module_by_class(const char *class_id, const char *inst, + const struct hw_module_t **module); + +__END_DECLS + +#endif /* ANDROID_INCLUDE_HARDWARE_HARDWARE_H */ -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
