--- doc/mgmt-api.txt | 98 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 98 insertions(+) diff --git a/doc/mgmt-api.txt b/doc/mgmt-api.txt index d68b70a..0395ddc 100644 --- a/doc/mgmt-api.txt +++ b/doc/mgmt-api.txt @@ -1338,6 +1338,104 @@ Set Scan Parameters Command Invalid Index +Get 3D Synchronization Features Command +======================================= + + Command Code: 0x002D + Controller Index: <controller id> + Command Parameters: + Return Parameters: Features (4 Octets) + + This command allows for gettig the supported 3D synchronization + features. These features can be used to detect what kind of 3D + synchronization modes are supported. + + When BR/EDR is not supported, this command is supported for + simplicity, but it will return an empty features set. This + command can also be used when the controller is powered off. + + NOTES: Since 3DPS is its own profiles, these supported features + are not to be intermixed with the GAP settings. These are special + hardware features like Connectionless Slave Broadcast roles that + are either supported or not. The advantage with a separate command + for 3DPS lets it easy to detect if it is running on a 3DPS enabled + kernel and what features of 3DPS are available. + + If it happens that the controller supports all the right features, + but not Secure Simple Pairing, then the broadcaster modes will be + left out. + + This command generates a Command Complete event on success or a + Command Status event on failure. + + Possible errors: Rejected + Not Supported + Invalid Parameters + Invalid Index + + +Set 3D Synchronization Broadcast Command +======================================== + + Command Code: 0x002E + Controller Index: <controller id> + Command Parameters: Mode (1 Octets) + ... + Return Parameters: + + This command allows for enabling 3D synchronization broadcast + modes. This is normally the 3D display role. + + It is required that the controller has support for connectionless + slave broadcast and train synchronization in master role. + + When Secure Simple Pairing is disabled, this command will fail + with an error. + + NOTES: The actual list of parameters still needs to be figured + out, but it should include broadcast data and 3D information data. + + This command generates a Command Complete event on success or a + Command Status event on failure. + + Possible errors: Rejected + Not Supported + Invalid Parameters + Invalid Index + + +Set 3D Synchronization Receiver Command +======================================= + + Command Code: 0x002E + Controller Index: <controller id> + Command Parameters: Address (6 Octets) + Address_Type (1 Octet) + ... + Return Parameters: + + This command allows for enabling 3D synchronization receiver + modes. This is normally the 3D glasses role. + + It is required that the controller has support for connectionless + slave broadcast and train synchronization in slave role. + + NOTES: The actual list of parameters still needs to be figured + out, but it should include broadcast data and 3D information data. + + NOTES: The actual data information can be either reported via + an event or via an L2CAP channel. That still needs to be figured + out. + + This command generates a Command Complete event on success or a + Command Status event on failure. + + Possible errors: Rejected + Not Supported + Invalid Parameters + Invalid Index + + Command Complete Event ====================== -- 1.8.3.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
