Hi Dohyun, > The Set_Connectionless_Slave_Broadcast_Data command provides the > ability for the Host to set Connectionless Slave Broadcast data in > the BR/EDR Controller. > > The Core Spec Addendum 4 adds this command in part B Connectionless > Slave Broadcast. > > Bluetooth Core Specification Addendum 4 - Page 93 > > "7.3.88 Set Connectionless Slave Broadcast Data Command [New Section] > ... > If connectionless slave broadcast mode is disabled, this data shall be > kept by the BR/EDR Controller and used once connectionless slave broadcast > mode is enabled. If connectionless slave broadcast mode is enabled, > and this command is successful, this data will be sent starting with > the next Connectionless Slave Broadcast instant. > > The Data_Length field may be zero, in which case no data needs to be > provided. > > The Host may fragment the data using the Fragment field in the command. If > the combined length of the fragments exceeds the capacity of the largest > allowed packet size specified in the Set Connectionless Slave Broadcast > command, all fragments associated with the data being assembled shall be > discarded and the Invalid HCI Command Parameters error (0x12) shall be > returned." > > Signed-off-by: Dohyun Pyun <dh79.pyun@xxxxxxxxxxx> > Signed-off-by: C S Bhargava <cs.bhargava@xxxxxxxxxxx> > --- > include/net/bluetooth/hci.h | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h > index 28294ac..d5a0da0 100644 > --- a/include/net/bluetooth/hci.h > +++ b/include/net/bluetooth/hci.h > @@ -35,6 +35,8 @@ > > #define HCI_MAX_AMP_ASSOC_SIZE 672 > > +#define HCI_MAX_CLB_DATA_SIZE 252 > + I have no idea what CLB stands for and how that got derived from connection slave broadcast. Regards Marcel -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
