From: DoHyun Pyun <dh79.pyun@xxxxxxxxxxx>
The Write_Synchronization_Train_Parameters command configures
the Synchronization Train functionality in the BR/EDR Controller.
The Core Spec Addendum 4 adds this command in part B Connectionless
Slave Broadcast.
Bluetooth Core Specification Addendum 4 - Page 97
"7.3.90 Write Synchronization Train Parameters Command [New Section]
...
Note: The AFH_Channel_Map used in the Synchronization Train packets is
configured by the Set_AFH_Channel_Classification command and the local
channel classification in the BR/EDR Controller.
Interval_Min and Interval_Max specify the allowed range of
Sync_Train_Interval. Refer to [Vol. 2], Part B, section 2.7.2 for
a detailed description of Sync_Train_Interval. The BR/EDR Controller shall
select an interval from this range and return it in Sync_Train_Interval.
If the Controller is unable to select a value from this range, it shall
return the Invalid HCI Command Parameters (0x12) error code.
Once started (via the Start_Synchronization_Train Command) the
Synchronization Train will continue until synchronization_trainTO slots have
passed or Connectionless Slave Broadcast has been disabled."
Signed-off-by: Dohyun Pyun <dh79.pyun@xxxxxxxxxxx>
Signed-off-by: C S Bhargava <cs.bhargava@xxxxxxxxxxx>
---
include/net/bluetooth/hci.h | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index d5a0da0..6579bd3 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -870,6 +870,18 @@ struct hci_rp_set_clb_data {
__u8 lt_addr;
} __packed;
+#define HCI_OP_WRITE_SYNC_TRAIN_PARAMS 0x0c78
+struct hci_cp_write_sync_train_params {
+ __le16 interval_min;
+ __le16 interval_max;
+ __le32 sync_train_tout;
+ __u8 service_data;
+} __packed;
+struct hci_rp_write_sync_train_params {
+ __u8 status;
+ __le16 sync_train_int;
+} __packed;
+
#define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77
#define HCI_OP_READ_LOCAL_VERSION 0x1001
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
