[PATCH v10 05/10] Bluetooth: Use voice setting in deferred SCO connection request

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When an incoming eSCO connection is requested, check the selected voice
setting and reply appropriately. Voice setting should have been
negotiated previously.  For example, in case of HFP, the codec is
negotiated using AT commands on the RFCOMM channel. This patch only
changes replies for socket with deferred setup enabled.

Signed-off-by: Frédéric Dalleau <frederic.dalleau@xxxxxxxxxxxxxxx>
Signed-off-by: Johan Hedberg <johan.hedberg@xxxxxxxxx>
---
 net/bluetooth/sco.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)

diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index e8cda67..3b3d24a 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -653,7 +653,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	return err;
 }
 
-static void sco_conn_defer_accept(struct hci_conn *conn)
+static void sco_conn_defer_accept(struct hci_conn *conn, u16 setting)
 {
 	struct hci_dev *hdev = conn->hdev;
 
@@ -676,9 +676,21 @@ static void sco_conn_defer_accept(struct hci_conn *conn)
 
 		cp.tx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
 		cp.rx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
-		cp.max_latency    = __constant_cpu_to_le16(0xffff);
-		cp.content_format = cpu_to_le16(hdev->voice_setting);
-		cp.retrans_effort = 0xff;
+		cp.content_format = cpu_to_le16(setting);
+
+		switch (setting & SCO_AIRMODE_MASK) {
+		case SCO_AIRMODE_TRANSP:
+			if (conn->pkt_type & ESCO_2EV3)
+				cp.max_latency = __constant_cpu_to_le16(0x0008);
+			else
+				cp.max_latency = __constant_cpu_to_le16(0x000D);
+			cp.retrans_effort = 0x02;
+			break;
+		case SCO_AIRMODE_CVSD:
+			cp.max_latency = __constant_cpu_to_le16(0xffff);
+			cp.retrans_effort = 0xff;
+			break;
+		}
 
 		hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
 			     sizeof(cp), &cp);
@@ -695,7 +707,7 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 
 	if (sk->sk_state == BT_CONNECT2 &&
 	    test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) {
-		sco_conn_defer_accept(pi->conn->hcon);
+		sco_conn_defer_accept(pi->conn->hcon, pi->setting);
 		sk->sk_state = BT_CONFIG;
 		msg->msg_namelen = 0;
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux