Clean up bluetooth files
- replace foo* bar with foo *bar
- add space arround '='
- remove trailing witespaces
- remove assignment in if
- fix coding style issues
Signed-off-by: Valentin Ilie <valentin.ilie@xxxxxxxxx>
---
drivers/bluetooth/Kconfig | 12 +++++------
drivers/bluetooth/dtl1_cs.c | 6 +++---
drivers/bluetooth/hci_bcsp.c | 48 +++++++++++++++++++++--------------------
drivers/bluetooth/hci_h5.c | 6 ++++--
drivers/bluetooth/hci_ldisc.c | 15 +++++++------
drivers/bluetooth/hci_vhci.c | 4 ++--
6 files changed, 49 insertions(+), 42 deletions(-)
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 11a6104..6421414 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -30,8 +30,8 @@ config BT_HCIUART
help
Bluetooth HCI UART driver.
This driver is required if you want to use Bluetooth devices with
- serial port interface. You will also need this driver if you have
- UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
+ serial port interface. You will also need this driver if you have
+ UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
adapter and BrainBoxes Bluetooth PC Card.
Say Y here to compile support for Bluetooth UART devices into the
@@ -41,9 +41,9 @@ config BT_HCIUART_H4
bool "UART (H4) protocol support"
depends on BT_HCIUART
help
- UART (H4) is serial protocol for communication between Bluetooth
- device and host. This protocol is required for most Bluetooth devices
- with UART interface, including PCMCIA and CF cards.
+ UART (H4) is serial protocol for communication between Bluetooth
+ device and host. This protocol is required for most Bluetooth devices
+ with UART interface, including PCMCIA and CF cards.
Say Y here to compile support for HCI UART (H4) protocol.
@@ -52,7 +52,7 @@ config BT_HCIUART_BCSP
depends on BT_HCIUART
select BITREVERSE
help
- BCSP (BlueCore Serial Protocol) is serial protocol for communication
+ BCSP (BlueCore Serial Protocol) is serial protocol for communication
between Bluetooth device and host. This protocol is required for non
USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
CF cards.
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
index 33f3a69..3b89c0d 100644
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -153,7 +153,8 @@ static void dtl1_write_wakeup(dtl1_info_t *info)
if (!pcmcia_dev_present(info->p_dev))
return;
- if (!(skb = skb_dequeue(&(info->txq))))
+ skb = skb_dequeue(&(info->txq));
+ if (!skb)
break;
/* Send frame */
@@ -181,9 +182,8 @@ static void dtl1_control(dtl1_info_t *info, struct sk_buff *skb)
int i;
printk(KERN_INFO "Bluetooth: Nokia control data =");
- for (i = 0; i < skb->len; i++) {
+ for (i = 0; i < skb->len; i++)
printk(" %02x", skb->data[i]);
- }
printk("\n");
/* transition to active state */
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 57e502e..fbd54e8 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -105,11 +105,11 @@ static const u16 crc_table[] = {
#define BCSP_CRC_INIT(x) x = 0xffff
/*
- Update crc with next data byte
+ Update crc with next data byte
- Implementation note
- The data byte is treated as two nibbles. The crc is generated
- in reverse, i.e., bits are fed into the register from the top.
+ Implementation note
+ The data byte is treated as two nibbles. The crc is generated
+ in reverse, i.e., bits are fed into the register from the top.
*/
static void bcsp_crc_update(u16 *crc, u8 d)
{
@@ -287,11 +287,12 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
struct bcsp_struct *bcsp = hu->priv;
unsigned long flags;
struct sk_buff *skb;
-
+
/* First of all, check for unreliable messages in the queue,
since they have priority */
- if ((skb = skb_dequeue(&bcsp->unrel)) != NULL) {
+ skb = skb_dequeue(&bcsp->unrel);
+ if (skb != NULL) {
struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
if (nskb) {
kfree_skb(skb);
@@ -308,7 +309,8 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
spin_lock_irqsave_nested(&bcsp->unack.lock, flags, SINGLE_DEPTH_NESTING);
- if (bcsp->unack.qlen < BCSP_TXWINSIZE && (skb = skb_dequeue(&bcsp->rel)) != NULL) {
+ skb = skb_dequeue(&bcsp->rel);
+ if (bcsp->unack.qlen < BCSP_TXWINSIZE && skb != NULL) {
struct sk_buff *nskb = bcsp_prepare_pkt(bcsp, skb->data, skb->len, bt_cb(skb)->pkt_type);
if (nskb) {
__skb_queue_tail(&bcsp->unack, skb);
@@ -433,7 +435,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
break;
default:
memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, byte);
bcsp->rx_count--;
@@ -444,24 +446,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
switch (byte) {
case 0xdc:
memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xc0);
+ bcsp_crc_update(&bcsp->message_crc, 0xc0);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
case 0xdd:
memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
- bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xdb);
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
+ bcsp->rx_state != BCSP_W4_CRC)
+ bcsp_crc_update(&bcsp->message_crc, 0xdb);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
default:
- BT_ERR ("Invalid byte %02x after esc byte", byte);
+ BT_ERR("Invalid byte %02x after esc byte", byte);
kfree_skb(bcsp->rx_skb);
bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -524,9 +526,9 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
hci_recv_frame(bcsp->rx_skb);
} else {
- BT_ERR ("Packet for unknown channel (%u %s)",
+ BT_ERR("Packet for unknown channel (%u %s)",
bcsp->rx_skb->data[1] & 0x0f,
- bcsp->rx_skb->data[0] & 0x80 ?
+ bcsp->rx_skb->data[0] & 0x80 ?
"reliable" : "unreliable");
kfree_skb(bcsp->rx_skb);
}
@@ -554,7 +556,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
struct bcsp_struct *bcsp = hu->priv;
unsigned char *ptr;
- BT_DBG("hu %p count %d rx_state %d rx_count %ld",
+ BT_DBG("hu %p count %d rx_state %d rx_count %ld",
hu, count, bcsp->rx_state, bcsp->rx_count);
ptr = data;
@@ -574,7 +576,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
switch (bcsp->rx_state) {
case BCSP_W4_BCSP_HDR:
- if ((0xff & (u8) ~ (bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
+ if ((0xff & (u8) ~(bcsp->rx_skb->data[0] + bcsp->rx_skb->data[1] +
bcsp->rx_skb->data[2])) != bcsp->rx_skb->data[3]) {
BT_ERR("Error in BCSP hdr checksum");
kfree_skb(bcsp->rx_skb);
@@ -583,8 +585,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
continue;
}
if (bcsp->rx_skb->data[0] & 0x80 /* reliable pkt */
- && (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
- BT_ERR ("Out-of-order packet arrived, got %u expected %u",
+ && (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
+ BT_ERR("Out-of-order packet arrived, got %u expected %u",
bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
kfree_skb(bcsp->rx_skb);
@@ -593,7 +595,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
continue;
}
bcsp->rx_state = BCSP_W4_DATA;
- bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
+ bcsp->rx_count = (bcsp->rx_skb->data[1] >> 4) +
(bcsp->rx_skb->data[2] << 4); /* May be 0 */
continue;
@@ -607,7 +609,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
case BCSP_W4_CRC:
if (bitrev16(bcsp->message_crc) != bscp_get_crc(bcsp)) {
- BT_ERR ("Checksum failed: computed %04x received %04x",
+ BT_ERR("Checksum failed: computed %04x received %04x",
bitrev16(bcsp->message_crc),
bscp_get_crc(bcsp));
@@ -645,7 +647,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
BCSP_CRC_INIT(bcsp->message_crc);
/* Do not increment ptr or decrement count
- * Allocate packet. Max len of a BCSP pkt=
+ * Allocate packet. Max len of a BCSP pkt=
* 0xFFF (payload) +4 (header) +2 (crc) */
bcsp->rx_skb = bt_skb_alloc(0x1005, GFP_ATOMIC);
diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c
index b6154d5..67a0e6c 100644
--- a/drivers/bluetooth/hci_h5.c
+++ b/drivers/bluetooth/hci_h5.c
@@ -673,7 +673,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
return h5_prepare_pkt(hu, HCI_3WIRE_LINK_PKT, wakeup_req, 2);
}
- if ((skb = skb_dequeue(&h5->unrel)) != NULL) {
+ skb = skb_dequeue(&h5->unrel);
+ if (skb != NULL) {
nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
skb->data, skb->len);
if (nskb) {
@@ -690,7 +691,8 @@ static struct sk_buff *h5_dequeue(struct hci_uart *hu)
if (h5->unack.qlen >= h5->tx_win)
goto unlock;
- if ((skb = skb_dequeue(&h5->rel)) != NULL) {
+ skb = skb_dequeue(&h5->rel);
+ if (skb != NULL) {
nskb = h5_prepare_pkt(hu, bt_cb(skb)->pkt_type,
skb->data, skb->len);
if (nskb) {
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index bc68a44..d424e7d 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -236,7 +236,7 @@ static int hci_uart_close(struct hci_dev *hdev)
/* Send frames from HCI layer */
static int hci_uart_send_frame(struct sk_buff *skb)
{
- struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+ struct hci_dev *hdev = (struct hci_dev *) skb->dev;
struct hci_uart *hu;
if (!hdev) {
@@ -279,7 +279,8 @@ static int hci_uart_tty_open(struct tty_struct *tty)
if (tty->ops->write == NULL)
return -EOPNOTSUPP;
- if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
+ hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL);
+ if (!hu) {
BT_ERR("Can't allocate control structure");
return -ENFILE;
}
@@ -483,7 +484,7 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
*
* Return Value: Command dependent
*/
-static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file * file,
+static int hci_uart_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
struct hci_uart *hu = (void *)tty->disc_data;
@@ -564,7 +565,7 @@ static int __init hci_uart_init(void)
/* Register the tty discipline */
- memset(&hci_uart_ldisc, 0, sizeof (hci_uart_ldisc));
+ memset(&hci_uart_ldisc, 0, sizeof(hci_uart_ldisc));
hci_uart_ldisc.magic = TTY_LDISC_MAGIC;
hci_uart_ldisc.name = "n_hci";
hci_uart_ldisc.open = hci_uart_tty_open;
@@ -577,7 +578,8 @@ static int __init hci_uart_init(void)
hci_uart_ldisc.write_wakeup = hci_uart_tty_wakeup;
hci_uart_ldisc.owner = THIS_MODULE;
- if ((err = tty_register_ldisc(N_HCI, &hci_uart_ldisc))) {
+ err = tty_register_ldisc(N_HCI, &hci_uart_ldisc);
+ if (err) {
BT_ERR("HCI line discipline registration failed. (%d)", err);
return err;
}
@@ -622,7 +624,8 @@ static void __exit hci_uart_exit(void)
#endif
/* Release tty registration of line discipline */
- if ((err = tty_unregister_ldisc(N_HCI)))
+ err = tty_unregister_ldisc(N_HCI);
+ if (err)
BT_ERR("Can't unregister HCI line discipline (%d)", err);
}
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index d8b7aed..4b499f2 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -82,7 +82,7 @@ static int vhci_flush(struct hci_dev *hdev)
static int vhci_send_frame(struct sk_buff *skb)
{
- struct hci_dev* hdev = (struct hci_dev *) skb->dev;
+ struct hci_dev *hdev = (struct hci_dev *) skb->dev;
struct vhci_data *data;
if (!hdev) {
@@ -281,7 +281,7 @@ static const struct file_operations vhci_fops = {
.llseek = no_llseek,
};
-static struct miscdevice vhci_miscdev= {
+static struct miscdevice vhci_miscdev = {
.name = "vhci",
.fops = &vhci_fops,
.minor = MISC_DYNAMIC_MINOR,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
