https://bugzilla.kernel.org/show_bug.cgi?id=59701 --- Comment #2 from jkp <jkp@xxxxxx> 2013-06-14 12:13:58 --- Here's btmon 5.5 log output with address info sanitized: = New Index: 6C:71:XX:XX:XX:XX (BR/EDR,USB,hci0) [hci0] 0.230856 < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 7.585299 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.589853 Reset (0x03|0x0003) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 7.589949 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 7.605778 Read Local Supported Features (0x04|0x0003) ncmd 1 Status: Success (0x00) Features: 0xff 0xfe 0x0d 0xfe 0xd8 0x7f 0x7b 0x87 3 slot packets 5 slot packets Encryption Slot offset Timing accuracy Role switch Hold mode Sniff mode Power control requests Channel quality driven data rate (CQDDR) SCO link HV2 packets HV3 packets u-law log synchronous data A-law log synchronous data CVSD synchronous data Power control Transparent synchronous data Enhanced Data Rate ACL 2 Mbps mode Enhanced Data Rate ACL 3 Mbps mode Enhanced inquiry scan Interlaced inquiry scan Interlaced page scan RSSI with inquiry results Extended SCO link (EV3 packets) AFH capable slave AFH classification slave LE Supported (Controller) 3-slot Enhanced Data Rate ACL packets 5-slot Enhanced Data Rate ACL packets Sniff subrating Pause encryption AFH capable master AFH classification master Enhanced Data Rate eSCO 2 Mbps mode Enhanced Data Rate eSCO 3 Mbps mode Extended Inquiry Response Simultaneous LE and BR/EDR (Controller) Secure Simple Pairing Encapsulated PDU Erroneous Data Reporting Non-flushable Packet Boundary Flag Link Supervision Timeout Changed Event Inquiry TX Power Level Enhanced Power Control Extended features < HCI Command: Read Local Version Information (0x04|0x0001) plen 0 [hci0] 7.605871 > HCI Event: Command Complete (0x0e) plen 12 [hci0] 7.606783 Read Local Version Information (0x04|0x0001) ncmd 1 Status: Success (0x00) HCI version: 5 - 0x0102 LMP version: 6 - 0x0001 Manufacturer: Atheros Communications, Inc. (69) < HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 7.606944 > HCI Event: Command Complete (0x0e) plen 10 [hci0] 7.607805 Read BD ADDR (0x04|0x0009) ncmd 1 Status: Success (0x00) Address: 6C:71:XX:XX:XX:XX (OUI 6C-71-D9) < HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 7.607896 > HCI Event: Command Complete (0x0e) plen 11 [hci0] 7.608804 Read Buffer Size (0x04|0x0005) ncmd 1 Status: Success (0x00) ACL MTU: 1022 ACL max packet: 8 SCO MTU: 183 SCO max packet: 5 < HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 7.608857 > HCI Event: Command Complete (0x0e) plen 7 [hci0] 7.609761 Read Class of Device (0x03|0x0023) ncmd 1 Status: Success (0x00) Class: 0x000000 Major class: Miscellaneous Minor class: 0x00 < HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 7.609792 > HCI Event: Command Complete (0x0e) plen 252 [hci0] 7.625806 Read Local Name (0x03|0x0014) ncmd 1 Status: Success (0x00) Name: Bluetooth USB Host Controller < HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 7.625904 > HCI Event: Command Complete (0x0e) plen 6 [hci0] 7.626783 Read Voice Setting (0x03|0x0025) ncmd 1 Status: Success (0x00) Setting: 0x0060 < HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 7.626814 Type: 0x00 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.627762 Set Event Filter (0x03|0x0005) ncmd 1 Status: Success (0x00) < HCI Command: Write Connection Accept Timeout (0x03|0x0016) plen 2 [hci0] 7.627798 Timeout: 20000.000 msec (0x7d00) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.628774 Write Connection Accept Timeout (0x03|0x0016) ncmd 1 Status: Success (0x00) < HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7 [hci0] 7.628797 Address: 00:00:00:00:00:00 (OUI 00-00-00) Delete all: 0x01 > HCI Event: Command Complete (0x0e) plen 6 [hci0] 7.629759 Delete Stored Link Key (0x03|0x0012) ncmd 1 Status: Success (0x00) Num keys: 1 < HCI Command: LE Read Buffer Size (0x08|0x0002) plen 0 [hci0] 7.629789 > HCI Event: Command Complete (0x0e) plen 7 [hci0] 7.630770 LE Read Buffer Size (0x08|0x0002) ncmd 1 Status: Success (0x00) Data packet length: 27 Num data packets: 8 < HCI Command: LE Read Advertising Channel TX Power (0x08|0x0007) plen 0 [hci0] 7.630820 > HCI Event: Command Complete (0x0e) plen 5 [hci0] 7.631766 LE Read Advertising Channel TX Power (0x08|0x0007) ncmd 1 Status: Success (0x00) TX power: -2 dBm < HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 7.631820 Mask: 0x3dbff807fffbffff Inquiry Complete Inquiry Result Connection Complete Connection Request Disconnection Complete Authentication Complete Remote Name Request Complete Encryption Change Change Connection Link Key Complete Master Link Key Complete Read Remote Supported Features Complete Read Remote Version Information Complete QoS Setup Complete Command Complete Command Status Hardware Error Flush Occurred Role Change Mode Change Return Link Keys PIN Code Request Link Key Request Link Key Notification Loopback Command Data Buffer Overflow Max Slots Change Read Clock Offset Complete Connection Packet Type Changed QoS Violation Page Scan Mode Change Page Scan Repetition Mode Change Flow Specification Complete Inquiry Result with RSSI Read Remote Extended Features Complete Synchronous Connection Complete Synchronous Connection Changed Sniff Subrating Extended Inquiry Result Encryption Key Refresh Complete IO Capability Request IO Capability Request Reply User Confirmation Request User Passkey Request Remote OOB Data Request Simple Pairing Complete Link Supervision Timeout Changed Enhanced Flush Complete User Passkey Notification Keypress Notification Remote Host Supported Features Notification LE Meta > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.632764 Set Event Mask (0x03|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Event Mask (0x08|0x0001) plen 8 [hci0] 7.632809 Mask: 0x000000000000001f LE Connection Complete LE Advertising Report LE Connection Update Complete LE Read Remote Used Features LE Long Term Key Request > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.633764 LE Set Event Mask (0x08|0x0001) ncmd 1 Status: Success (0x00) < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 [hci0] 7.633807 > HCI Event: Command Complete (0x0e) plen 68 [hci0] 7.638808 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 159 entries Inquiry (Octet 0 - Bit 0) Inquiry Cancel (Octet 0 - Bit 1) Periodic Inquiry Mode (Octet 0 - Bit 2) Exit Periodic Inquiry Mode (Octet 0 - Bit 3) Create Connection (Octet 0 - Bit 4) Disconnect (Octet 0 - Bit 5) Create Connection Cancel (Octet 0 - Bit 7) Accept Connection Request (Octet 1 - Bit 0) Reject Connection Request (Octet 1 - Bit 1) Link Key Request Reply (Octet 1 - Bit 2) Link Key Request Negative Reply (Octet 1 - Bit 3) PIN Code Request Reply (Octet 1 - Bit 4) PIN Code Request Negative Reply (Octet 1 - Bit 5) Change Connection Packet Type (Octet 1 - Bit 6) Authentication Requested (Octet 1 - Bit 7) Set Connection Encryption (Octet 2 - Bit 0) Change Connection Link Key (Octet 2 - Bit 1) Remote Name Request (Octet 2 - Bit 3) Remote Name Request Cancel (Octet 2 - Bit 4) Read Remote Supported Features (Octet 2 - Bit 5) Read Remote Extended Features (Octet 2 - Bit 6) Read Remote Version Information (Octet 2 - Bit 7) Read Clock Offset (Octet 3 - Bit 0) Read LMP Handle (Octet 3 - Bit 1) Holde Mode (Octet 4 - Bit 1) Sniff Mode (Octet 4 - Bit 2) Exit Sniff Mode (Octet 4 - Bit 3) QoS Setup (Octet 4 - Bit 6) Role Discovery (Octet 4 - Bit 7) Switch Role (Octet 5 - Bit 0) Read Link Policy Settings (Octet 5 - Bit 1) Write Link Policy Settings (Octet 5 - Bit 2) Read Default Link Policy Settings (Octet 5 - Bit 3) Write Default Link Policy Settings (Octet 5 - Bit 4) Flow Specification (Octet 5 - Bit 5) Set Event Mask (Octet 5 - Bit 6) Reset (Octet 5 - Bit 7) Set Event Filter (Octet 6 - Bit 0) Flush (Octet 6 - Bit 1) Read PIN Type (Octet 6 - Bit 2) Write PIN Type (Octet 6 - Bit 3) Read Stored Link Key (Octet 6 - Bit 5) Write Stored Link Key (Octet 6 - Bit 6) Delete Stored Link Key (Octet 6 - Bit 7) Write Local Name (Octet 7 - Bit 0) Read Local Name (Octet 7 - Bit 1) Read Connection Accept Timeout (Octet 7 - Bit 2) Write Connection Accept Timeout (Octet 7 - Bit 3) Read Page Timeout (Octet 7 - Bit 4) Write Page Timeout (Octet 7 - Bit 5) Read Scan Enable (Octet 7 - Bit 6) Write Scan Enable (Octet 7 - Bit 7) Read Page Scan Activity (Octet 8 - Bit 0) Write Page Scan Activity (Octet 8 - Bit 1) Read Inquiry Scan Activity (Octet 8 - Bit 2) Write Inquiry Scan Activity (Octet 8 - Bit 3) Read Authentication Enable (Octet 8 - Bit 4) Write Authentication Enable (Octet 8 - Bit 5) Read Class of Device (Octet 9 - Bit 0) Write Class of Device (Octet 9 - Bit 1) Read Voice Setting (Octet 9 - Bit 2) Write Voice Setting (Octet 9 - Bit 3) Read Automatic Flush Timeout (Octet 9 - Bit 4) Write Automatic Flush Timeout (Octet 9 - Bit 5) Read Num Broadcast Retransmissions (Octet 9 - Bit 6) Write Num Broadcast Retransmissions (Octet 9 - Bit 7) Read Hold Mode Activity (Octet 10 - Bit 0) Write Hold Mode Activity (Octet 10 - Bit 1) Read Transmit Power Level (Octet 10 - Bit 2) Read Sync Flow Control Enable (Octet 10 - Bit 3) Write Sync Flow Control Enable (Octet 10 - Bit 4) Set Host Controller To Host Flow (Octet 10 - Bit 5) Host Buffer Size (Octet 10 - Bit 6) Host Number of Completed Packets (Octet 10 - Bit 7) Read Link Supervision Timeout (Octet 11 - Bit 0) Write Link Supervision Timeout (Octet 11 - Bit 1) Read Number of Supported IAC (Octet 11 - Bit 2) Read Current IAC LAP (Octet 11 - Bit 3) Write Current IAC LAP (Octet 11 - Bit 4) Read Page Scan Mode (Octet 11 - Bit 7) Write Page Scan Mode (Octet 12 - Bit 0) Set AFH Host Channel Classification (Octet 12 - Bit 1) Read Inquiry Scan Type (Octet 12 - Bit 4) Write Inquiry Scan Type (Octet 12 - Bit 5) Read Inquiry Mode (Octet 12 - Bit 6) Write Inquiry Mode (Octet 12 - Bit 7) Read Page Scan Type (Octet 13 - Bit 0) Write Page Scan Type (Octet 13 - Bit 1) Read AFH Channel Assessment Mode (Octet 13 - Bit 2) Write AFH Channel Assessment Mode (Octet 13 - Bit 3) Read Local Version Information (Octet 14 - Bit 3) Read Local Supported Features (Octet 14 - Bit 5) Read Local Extended Features (Octet 14 - Bit 6) Read Buffer Size (Octet 14 - Bit 7) Read BD ADDR (Octet 15 - Bit 1) Read Failed Contact Counter (Octet 15 - Bit 2) Reset Failed Contact Counter (Octet 15 - Bit 3) Read Link Quality (Octet 15 - Bit 4) Read RSSI (Octet 15 - Bit 5) Read AFH Channel Map (Octet 15 - Bit 6) Read Clock (Octet 15 - Bit 7) Enable Device Under Test Mode (Octet 16 - Bit 2) Setup Synchronous Connection (Octet 16 - Bit 3) Accept Synchronous Connection (Octet 16 - Bit 4) Reject Synchronous Connection (Octet 16 - Bit 5) Read Extended Inquiry Response (Octet 17 - Bit 0) Write Extended Inquiry Response (Octet 17 - Bit 1) Refresh Encryption Key (Octet 17 - Bit 2) Sniff Subrating (Octet 17 - Bit 4) Read Simple Pairing Mode (Octet 17 - Bit 5) Write Simple Pairing Mode (Octet 17 - Bit 6) Read Local OOB Data (Octet 17 - Bit 7) Read Inquiry Response TX Power Level (Octet 18 - Bit 0) Write Inquiry Transmit Power Level (Octet 18 - Bit 1) Read Default Erroneous Reporting (Octet 18 - Bit 2) Write Default Erroneous Reporting (Octet 18 - Bit 3) IO Capability Request Reply (Octet 18 - Bit 7) User Confirmation Request Reply (Octet 19 - Bit 0) User Confirmation Request Neg Reply (Octet 19 - Bit 1) User Passkey Request Reply (Octet 19 - Bit 2) User Passkey Request Negative Reply (Octet 19 - Bit 3) Remote OOB Data Request Reply (Octet 19 - Bit 4) Write Simple Pairing Debug Mode (Octet 19 - Bit 5) Enhanced Flush (Octet 19 - Bit 6) Remote OOB Data Request Neg Reply (Octet 19 - Bit 7) Send Keypress Notification (Octet 20 - Bit 2) IO Capability Request Negative Reply (Octet 20 - Bit 3) Read Enhanced Transmit Power Level (Octet 24 - Bit 0) LE Set Event Mask (Octet 25 - Bit 0) LE Read Buffer Size (Octet 25 - Bit 1) LE Read Local Supported Features (Octet 25 - Bit 2) (null) (Octet 25 - Bit 3) LE Set Random Address (Octet 25 - Bit 4) LE Set Advertising Parameters (Octet 25 - Bit 5) LE Read Advertising Channel TX Power (Octet 25 - Bit 6) LE Set Advertising Data (Octet 25 - Bit 7) LE Set Scan Response Data (Octet 26 - Bit 0) LE Set Advertise Enable (Octet 26 - Bit 1) LE Set Scan Parameters (Octet 26 - Bit 2) LE Set Scan Enable (Octet 26 - Bit 3) LE Create Connection (Octet 26 - Bit 4) LE Create Connection Cancel (Octet 26 - Bit 5) LE Read White List Size (Octet 26 - Bit 6) LE Clear White List (Octet 26 - Bit 7) LE Add Device To White List (Octet 27 - Bit 0) LE Remove Device From White List (Octet 27 - Bit 1) LE Connection Update (Octet 27 - Bit 2) LE Set Host Channel Classification (Octet 27 - Bit 3) LE Read Channel Map (Octet 27 - Bit 4) LE Read Remote Used Features (Octet 27 - Bit 5) LE Encrypt (Octet 27 - Bit 6) LE Rand (Octet 27 - Bit 7) LE Start Encryption (Octet 28 - Bit 0) LE Long Term Key Request Reply (Octet 28 - Bit 1) LE Long Term Key Request Neg Reply (Octet 28 - Bit 2) LE Read Supported States (Octet 28 - Bit 3) LE Receiver Test (Octet 28 - Bit 4) LE Transmitter Test (Octet 28 - Bit 5) LE Test End (Octet 28 - Bit 6) < HCI Command: Write Simple Pairing Mode (0x03|0x0056) plen 1 [hci0] 7.638913 Mode: Enabled (0x01) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.639777 Write Simple Pairing Mode (0x03|0x0056) ncmd 1 Status: Success (0x00) < HCI Command: Write Inquiry Mode (0x03|0x0045) plen 1 [hci0] 7.639845 Mode: Inquiry Result with RSSI or Extended Inquiry Result (0x02) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.640805 Write Inquiry Mode (0x03|0x0045) ncmd 1 Status: Success (0x00) < HCI Command: Read Inquiry Response TX Power Level (0x03|0x0058) plen 0 [hci0] 7.640888 > HCI Event: Command Complete (0x0e) plen 5 [hci0] 7.641807 Read Inquiry Response TX Power Level (0x03|0x0058) ncmd 1 Status: Success (0x00) TX power: 4 dBm < HCI Command: Read Local Extended Features (0x04|0x0004) plen 1 [hci0] 7.641899 Page: 1 > HCI Event: Command Complete (0x0e) plen 14 [hci0] 7.642796 Read Local Extended Features (0x04|0x0004) ncmd 1 Status: Success (0x00) Page: 1/1 Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Secure Simple Pairing (Host Support) < HCI Command: Write Default Link Policy Settings (0x02|0x000f) plen 2 [hci0] 7.642864 Link policy: 0x0007 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.644773 Write Default Link Policy Settings (0x02|0x000f) ncmd 1 Status: Success (0x00) < HCI Command: Write LE Host Supported (0x03|0x006d) plen 2 [hci0] 7.644852 Supported: 0x01 Simultaneous: 0x01 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.645771 Write LE Host Supported (0x03|0x006d) ncmd 1 Status: Success (0x00) < HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32 [hci0] 7.645838 Length: 14 Flags: 0x18 Simultaneous LE and BR/EDR (Controller) Simultaneous LE and BR/EDR (Host) TX power: -2 dBm Name (complete): grml-0 @ New Settings: 0x02db powered connectable discoverable pairable ssp br/edr le > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.646765 LE Set Advertising Data (0x08|0x0008) ncmd 1 Status: Success (0x00) < HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 7.646805 Scan enable: Inquiry Scan + Page Scan (0x03) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.647762 Write Scan Enable (0x03|0x001a) ncmd 1 Status: Success (0x00) < HCI Command: Write Class of Device (0x03|0x0024) plen 3 [hci0] 7.647794 Class: 0x6e0100 Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc) Rendering (Printing, Speaker) Capturing (Scanner, Microphone) Audio (Speaker, Microphone, Headset) Telephony (Cordless telephony, Modem, Headset) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.648766 Write Class of Device (0x03|0x0024) ncmd 1 Status: Success (0x00) < HCI Command: Write Local Name (0x03|0x0013) plen 248 [hci0] 7.648813 Name: grml-0 @ Class of Device Changed: 0x6e0100 > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.649758 Write Local Name (0x03|0x0013) ncmd 1 Status: Success (0x00) < HCI Command: Write Extended Inquiry Response (0x03|0x0052) plen 241 [hci0] 7.649783 FEC: Not required (0x00) Name (complete): grml-0 TX power: 4 dBm 16-bit Service UUIDs (complete): 9 entries Audio Sink (0x110b) Audio Source (0x110a) Dialup Networking (0x1103) A/V Remote Control (0x110e) A/V Remote Control Target (0x110c) Handsfree (0x111e) Handsfree Audio Gateway (0x111f) Headset AG (0x1112) SIM Access (0x112d) > HCI Event: Command Complete (0x0e) plen 4 [hci0] 7.650760 Write Extended Inquiry Response (0x03|0x0052) ncmd 1 Status: Success (0x00) -- Configure bugmail: https://bugzilla.kernel.org/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are the assignee for the bug. -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
