[PATCH v3 3/5] Bluetooth: Use mode to create SCO connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When an incoming SCO connection is requested, check the selected mode, and
reply appropriately. Mode should have been negotiated previously. For example,
in case of HFP, the codec is negotiated using AT commands on the RFCOMM
channel. This patch only changes replies for socket with defered setup enabled.

Signed-off-by: Frédéric Dalleau <frederic.dalleau@xxxxxxxxxxxxxxx>
---
 net/bluetooth/sco.c |   23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 7d57af5..7fbb4c4 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -656,7 +656,7 @@ static int sco_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
 	return err;
 }
 
-static void sco_conn_defer_accept(struct hci_conn *conn, int mask)
+static void sco_conn_defer_accept(struct hci_conn *conn, int mask, int mode)
 {
 	struct hci_dev *hdev = conn->hdev;
 
@@ -683,9 +683,22 @@ static void sco_conn_defer_accept(struct hci_conn *conn, int mask)
 
 		cp.tx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
 		cp.rx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
-		cp.max_latency    = __constant_cpu_to_le16(0xffff);
-		cp.content_format = cpu_to_le16(hdev->voice_setting);
-		cp.retrans_effort = 0xff;
+
+		switch (mode) {
+		case SCO_MODE_CVSD:
+			cp.max_latency    = __constant_cpu_to_le16(0xffff);
+			cp.content_format = cpu_to_le16(hdev->voice_setting);
+			cp.retrans_effort = 0xff;
+			break;
+		case SCO_MODE_TRANSPARENT:
+			if (conn->pkt_type & ESCO_2EV3)
+				cp.max_latency = __constant_cpu_to_le16(0x0008);
+			else
+				cp.max_latency = __constant_cpu_to_le16(0x000D);
+			cp.content_format = __constant_cpu_to_le16(0x0003);
+			cp.retrans_effort = 0x02;
+			break;
+		}
 
 		hci_send_cmd(hdev, HCI_OP_ACCEPT_SYNC_CONN_REQ,
 			     sizeof(cp), &cp);
@@ -702,7 +715,7 @@ static int sco_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
 
 	if (sk->sk_state == BT_CONNECT2 &&
 	    test_bit(BT_SK_DEFER_SETUP, &bt_sk(sk)->flags)) {
-		sco_conn_defer_accept(pi->conn->hcon, 0);
+		sco_conn_defer_accept(pi->conn->hcon, 0, pi->mode);
 		sk->sk_state = BT_CONFIG;
 
 		release_sock(sk);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux