Hi Szymon, * Szymon Janc <szymon.janc@xxxxxxxxx> [2012-12-11 08:51:19 +0100]: > After sending reset command wait for its command complete event before > sending next command. Some chips sends CC event for command received > before reset if reset was send before chip replied with CC. > > This is also required by specification that host shall not send > additional HCI commands before receiving CC for reset. > > < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 18.404612 > > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.405850 > Write Extended Inquiry Response (0x03|0x0052) ncmd 1 > Status: Success (0x00) > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.406079 > > HCI Event: Command Complete (0x0e) plen 4 [hci0] 18.407864 > Reset (0x03|0x0003) ncmd 1 > Status: Success (0x00) > < HCI Command: Read Local Supported Features (0x04|0x0003) plen 0 [hci0] 18.408062 > > HCI Event: Command Complete (0x0e) plen 12 [hci0] 18.408835 > > Signed-off-by: Szymon Janc <szymon.janc@xxxxxxxxx> > Cc: stable@xxxxxxxxxxxxxxx > Acked-by: Johan Hedberg <johan.hedberg@xxxxxxxxx> > --- > net/bluetooth/hci_event.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) Patch has been applied to bluetooth.git. Thanks. Gustavo -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html