Hi Mat,
> >> The logical link confirm callback is executed when the AMP controller
> >> completes its logical link setup. During a channel move, a newly
> >> formed logical link allows a move responder to send a move channel
> >> response. A move initiator will send a move channel confirm. A
> >> failed logical link will end the channel move and send an appropriate
> >> response or confirm command indicating a failure.
> >>
> >> If the channel is being created on an AMP controller, L2CAP
> >> configuration is completed after the logical link is set up.
> >>
> >> Signed-off-by: Mat Martineau <mathewm@xxxxxxxxxxxxxx>
> >> ---
> >> net/bluetooth/l2cap_core.c | 124 ++++++++++++++++++++++++++++++++++++++++++---
> >> 1 file changed, 116 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> >> index 69d43c9..0edc955 100644
> >> --- a/net/bluetooth/l2cap_core.c
> >> +++ b/net/bluetooth/l2cap_core.c
> >> @@ -3799,6 +3799,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
> >> goto unlock;
> >> }
> >>
> >> + chan->ident = cmd->ident;
> >> l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
> >> chan->num_conf_rsp++;
> >>
> >> @@ -4198,17 +4199,17 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
> >> return 0;
> >> }
> >>
> >> -static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
> >> - u16 icid, u16 result)
> >> +static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
> >> {
> >> struct l2cap_move_chan_rsp rsp;
> >>
> >> - BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
> >> + BT_DBG("chan %p, result 0x%4.4x", chan, result);
> >>
> >> - rsp.icid = cpu_to_le16(icid);
> >> + rsp.icid = cpu_to_le16(chan->dcid);
> >> rsp.result = cpu_to_le16(result);
> >>
> >> - l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_RSP, sizeof(rsp), &rsp);
> >> + l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
> >> + sizeof(rsp), &rsp);
> >> }
> >>
> >> static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
> >> @@ -4260,11 +4261,114 @@ static void __release_logical_link(struct l2cap_chan *chan)
> >> /* Placeholder - release the logical link */
> >> }
> >>
> >> +static void l2cap_logical_fail(struct l2cap_chan *chan)
> >> +{
> >> + /* Logical link setup failed */
> >> + if (chan->state != BT_CONNECTED) {
> >> + /* Create channel failure, disconnect */
> >> + l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
> >
> > lets do this:
> >
> > if (chan->state != BT_CONNECTED) {
> > ...
> > return;
> > }
> >
>
> Ok.
>
> >> + } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
> >> + l2cap_move_revert(chan);
> >> + chan->move_role = L2CAP_MOVE_ROLE_NONE;
> >> + chan->move_state = L2CAP_MOVE_STABLE;
> >> + l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
> >> + } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
> >> + if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
> >> + chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
> >> + /* Remote has only sent pending or
> >> + * success responses, clean up
> >> + */
> >> + l2cap_move_revert(chan);
> >> + chan->move_role = L2CAP_MOVE_ROLE_NONE;
> >> + chan->move_state = L2CAP_MOVE_STABLE;
> >> + }
> >> +
> >> + /* Other amp move states imply that the move
> >> + * has already aborted
> >> + */
> >> + l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
> >> + }
> >
> > And turn this into a switch statement.
> >
> >> +
> >> + __release_logical_link(chan);
> >
> > And leave this to the caller.
> >
>
> Ok.
>
> >> +}
> >> +
> >> +static void l2cap_logical_finish_create(struct l2cap_chan *chan,
> >> + struct hci_chan *hchan)
> >> +{
> >> + struct l2cap_conf_rsp rsp;
> >> + u8 code;
> >> +
> >> + chan->hs_hcon = hchan->conn;
> >> + chan->hs_hcon->l2cap_data = chan->conn;
> >> +
> >> + code = l2cap_build_conf_rsp(chan, &rsp,
> >> + L2CAP_CONF_SUCCESS, 0);
> >> + l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
> >> + &rsp);
> >> + set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
> >> +
> >> + if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
> >> + int err = 0;
> >> +
> >> + set_default_fcs(chan);
> >> +
> >> + err = l2cap_ertm_init(chan);
> >> + if (err < 0)
> >> + l2cap_send_disconn_req(chan->conn, chan, -err);
> >> + else
> >> + l2cap_chan_ready(chan);
> >> + }
> >> +}
> >> +
> >> +static void l2cap_logical_finish_move(struct l2cap_chan *chan,
> >> + struct hci_chan *hchan)
> >> +{
> >> + chan->hs_hcon = hchan->conn;
> >> + chan->hs_hcon->l2cap_data = chan->conn;
> >> +
> >> + BT_DBG("move_state %d", chan->move_state);
> >> +
> >> + switch (chan->move_state) {
> >> + case L2CAP_MOVE_WAIT_LOGICAL_COMP:
> >> + /* Move confirm will be sent after a success
> >> + * response is received
> >> + */
> >> + chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
> >> + break;
> >> + case L2CAP_MOVE_WAIT_LOGICAL_CFM:
> >> + if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
> >> + chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
> >
> > My brain just hurts from these nested if-else. A nested two switch does
> > not make it any better though. So we can leave it as this. Except the
> > statement below is used multiple places and we have a function for it.
> >
>
> This version (v4) of the patch reflects some consolidation in these
> statements already, where I put more code inside
> l2cap_send_move_chan_cfm and l2cap_send_move_chan_rsp. The move_state
> assignments don't fit well in those helper functions.
>
> The next 7 lines of code are not duplicated anywhere else. The first
> block (L2CAP_MOVE_WAIT_CONFIRM_RSP + send confirm) is used in one
> other place. The second block (L2CAP_MOVE_WAIT_CONFIRM + send
> response) is also used in just one other place -- but a different one.
> The surrounding logic based on chan->move_role is not shared.
>
> Do you want me to create 2-line helper functions for each case, or
> were you thinking there was more duplicated code around? Adding new
> functions is a net gain in lines of code and doesn't seem like a big
> win for clarity.
just leave this one as it is then. Not sure we can gain anything. Thanks
for having a second look a this.
> >> + } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
> >> + chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
> >> + l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
> >> + } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
> >> + chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
> >> + l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
> >> + }
> >> + break;
> >> + default:
> >> + /* Move was not in expected state, free the channel */
> >> + __release_logical_link(chan);
> >> +
> >> + chan->move_state = L2CAP_MOVE_STABLE;
> >> + }
> >> +}
> >> +
> >> +/* Call with chan locked */
> >> static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
> >> u8 status)
> >> {
> >> - /* Placeholder */
> >> - return;
> >> + BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
> >> +
> >> + if (status) {
> >> + l2cap_logical_fail(chan);
> >
> > I rather have a return here.
> >
> > if (status) {
> > l2cap_logical_fail(chan);
> > __release_logical_link(chan);
> > return;
> > }
> >
>
> Ok.
>
> >> + } else if (chan->state != BT_CONNECTED) {
> >> + /* Ignore logical link if channel is on BR/EDR */
> >> + if (chan->local_amp_id)
> >> + l2cap_logical_finish_create(chan, hchan);
> >> + } else {
> >> + l2cap_logical_finish_move(chan, hchan);
> >> + }
> >> }
> >>
> >> static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
> >> @@ -4272,6 +4376,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
> >> u16 cmd_len, void *data)
> >> {
> >> struct l2cap_move_chan_req *req = data;
> >> + struct l2cap_move_chan_rsp rsp;
> >> struct l2cap_chan *chan;
> >> u16 icid = 0;
> >> u16 result = L2CAP_MR_NOT_ALLOWED;
> >> @@ -4348,7 +4453,10 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
> >> }
> >>
> >> send_move_response:
> >> - l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
> >> + rsp.icid = cpu_to_le16(icid);
> >> + rsp.result = cpu_to_le16(result);
> >> + l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
> >> + sizeof(rsp), &rsp);
> >>
> >> if (chan)
> >> l2cap_chan_unlock(chan);
> >
> > While not part of this patch, I still dislike if (something) unlock
> > style. Please have that fixed as well.
>
> I'll fix it. This is the only "if (chan) / unlock" case left.
Great. We are getting close now.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
