Hi Andrei -
On Fri, 19 Oct 2012, Andrei Emeltchenko wrote:
Hi Mat,
On Thu, Oct 18, 2012 at 10:58:42AM -0700, Mat Martineau wrote:
The logical link confirm callback is executed when the AMP controller
completes its logical link setup. During a channel move, a newly
formed logical link allows a move responder to send a move channel
response. A move initiator will send a move channel confirm. A
failed logical link will end the channel move and send an appropriate
response or confirm command indicating a failure.
If the channel is being created on an AMP controller, L2CAP
configuration is started after the logical link is set up.
Is L2CAP configuration started after channel is created which is happening
after physical link is created? After Logical link establishment we finish
EFS configuration process.
I need to rephrase that last sentence to say "configuration is
completed after the logical link is set up".
Signed-off-by: Mat Martineau <mathewm@xxxxxxxxxxxxxx>
---
net/bluetooth/l2cap_core.c | 120 ++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 118 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 7e50aa4..8e50685 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3799,6 +3799,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
goto unlock;
}
+ chan->ident = cmd->ident;
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
chan->num_conf_rsp++;
@@ -4241,11 +4242,126 @@ static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
}
+static void l2cap_logical_fail(struct l2cap_chan *chan)
+{
+ /* Logical link setup failed */
+ if (chan->state != BT_CONNECTED) {
+ /* Create channel failure, disconnect */
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ l2cap_send_move_chan_rsp(chan->conn, chan->ident, chan->dcid,
+ L2CAP_MR_NOT_SUPP);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
+ chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
+ /* Remote has only sent pending or
+ * success responses, clean up
+ */
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+
+ /* Other amp move states imply that the move
+ * has already aborted
+ */
+ l2cap_send_move_chan_cfm(chan->conn, chan, chan->scid,
+ L2CAP_MC_UNCONFIRMED);
+ __set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
+ }
+
+ chan->hs_hchan = NULL;
+ chan->hs_hcon = NULL;
+
+ /* Placeholder - free logical link */
+}
+
+static void l2cap_logical_create_channel(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
This is bad name IMO, the function finish L2CAP EFS configuration not
creating logical link.
l2cap_logical_cfm had three paths: failure, create channel, and move
channel. I was trying to come up with function names that reflected
which activity was going on. Maybe l2cap_logical_finish_create() and
l2cap_logical_finish_move() would be more clear?
+ struct l2cap_conf_rsp rsp;
+ u8 code;
+
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ code = l2cap_build_conf_rsp(chan, &rsp,
+ L2CAP_CONF_SUCCESS, 0);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
+ &rsp);
+ set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
+
+ if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
+ int err = 0;
+
+ set_default_fcs(chan);
+
+ err = l2cap_ertm_init(chan);
+ if (err < 0)
+ l2cap_send_disconn_req(chan->conn, chan, -err);
+ else
+ l2cap_chan_ready(chan);
+ }
+}
+
+static void l2cap_logical_move_channel(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ BT_DBG("move_state %d", chan->move_state);
+
+ switch (chan->move_state) {
+ case L2CAP_MOVE_WAIT_LOGICAL_COMP:
+ /* Move confirm will be sent after a success
+ * response is received
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ break;
+ case L2CAP_MOVE_WAIT_LOGICAL_CFM:
+ if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
+ l2cap_send_move_chan_cfm(chan->conn, chan, chan->scid,
+ L2CAP_MR_SUCCESS);
+ __set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ l2cap_send_move_chan_rsp(chan->conn, chan->ident,
+ chan->dcid, L2CAP_MR_SUCCESS);
+ }
+ break;
+ default:
+ /* Move was not in expected state, free the channel */
+ chan->hs_hchan = NULL;
+ chan->hs_hcon = NULL;
+
+ /* Placeholder - free the logical link */
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+}
+
+/* Call with chan locked */
static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
u8 status)
{
- /* Placeholder */
- return;
+ BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
+
+ if (status) {
+ l2cap_logical_fail(chan);
+ } else if (chan->state != BT_CONNECTED) {
+ /* Ignore logical link if channel is on BR/EDR */
+ if (chan->local_amp_id)
+ l2cap_logical_create_channel(chan, hchan);
+ } else {
+ l2cap_logical_move_channel(chan, hchan);
+ }
}
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
--
1.7.12.3
Regards,
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
