Re: [PATCHv2 10/19] Bluetooth: Add logical link confirm

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mat,

> The logical link confirm callback is executed when the AMP controller
> completes its logical link setup.  During a channel move, a newly
> formed logical link allows a move responder to send a move channel
> response.  A move initiator will send a move channel confirm.  A
> failed logical link will end the channel move and send an appropriate
> response or confirm command indicating a failure.
> 
> If the channel is being created on an AMP controller, L2CAP
> configuration is started after the logical link is set up.
> 
> Signed-off-by: Mat Martineau <mathewm@xxxxxxxxxxxxxx>
> ---
>  net/bluetooth/l2cap_core.c | 114 ++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 112 insertions(+), 2 deletions(-)
> 
> diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
> index 5e4796c..ddd8c72 100644
> --- a/net/bluetooth/l2cap_core.c
> +++ b/net/bluetooth/l2cap_core.c
> @@ -3799,6 +3799,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
>  		goto unlock;
>  	}
>  
> +	chan->ident = cmd->ident;
>  	l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
>  	chan->num_conf_rsp++;
>  
> @@ -4241,11 +4242,120 @@ static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
>  	l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
>  }
>  
> +/* Call with chan locked */
>  static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
>  			      u8 status)
>  {
> -	/* Placeholder */
> -	return;
> +	BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
> +
> +	if (status) {
> +		/* Logical link setup failed */
> +		if (chan->state != BT_CONNECTED) {
> +			/* Create channel failure, disconnect */
> +			l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
> +		} else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
> +			l2cap_move_revert(chan);
> +			chan->move_role = L2CAP_MOVE_ROLE_NONE;
> +			chan->move_state = L2CAP_MOVE_STABLE;
> +			l2cap_send_move_chan_rsp(chan->conn, chan->ident,
> +						 chan->dcid, L2CAP_MR_NOT_SUPP);
> +		} else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
> +			if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
> +			    chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
> +				/* Remote has only sent pending or
> +				 * success responses, clean up
> +				 */
> +				l2cap_move_revert(chan);
> +				chan->move_role = L2CAP_MOVE_ROLE_NONE;
> +				chan->move_state = L2CAP_MOVE_STABLE;
> +			}
> +
> +			/* Other amp move states imply that the move
> +			 * has already aborted
> +			 */
> +			l2cap_send_move_chan_cfm(chan->conn, chan, chan->scid,
> +						 L2CAP_MC_UNCONFIRMED);
> +			__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
> +		}
> +
> +		chan->hs_hchan = NULL;
> +		chan->hs_hcon = NULL;
> +
> +		/* Placeholder - free logical link */
> +
> +	} else if (chan->state != BT_CONNECTED) {
> +		struct l2cap_conf_rsp rsp;
> +		u8 code;
> +
> +		/* Create channel complete */
> +
> +		/* Ignore logical link if channel is on BR/EDR */
> +		if (!chan->local_amp_id)
> +			return;
> +
> +		chan->hs_hcon = hchan->conn;
> +		chan->hs_hcon->l2cap_data = chan->conn;
> +
> +		code = l2cap_build_conf_rsp(chan, &rsp,
> +					    L2CAP_CONF_SUCCESS, 0);
> +		l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
> +			       &rsp);
> +		set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
> +
> +		if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
> +			int err = 0;
> +
> +			set_default_fcs(chan);
> +
> +			err = l2cap_ertm_init(chan);
> +			if (err < 0)
> +				l2cap_send_disconn_req(chan->conn, chan, -err);
> +			else
> +				l2cap_chan_ready(chan);
> +		}
> +	} else {
> +		/* Channel move */
> +		chan->hs_hcon = hchan->conn;
> +		chan->hs_hcon->l2cap_data = chan->conn;
> +
> +		BT_DBG("move_state %d", chan->move_state);
> +
> +		switch (chan->move_state) {
> +		case L2CAP_MOVE_WAIT_LOGICAL_COMP:
> +			/* Move confirm will be sent after a success
> +			 * response is received
> +			 */
> +			chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
> +			break;
> +		case L2CAP_MOVE_WAIT_LOGICAL_CFM:
> +			if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
> +				chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
> +			} else if (chan->move_role ==
> +				   L2CAP_MOVE_ROLE_INITIATOR) {
> +				chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
> +				l2cap_send_move_chan_cfm(chan->conn, chan,
> +							 chan->scid,
> +							 L2CAP_MR_SUCCESS);
> +				__set_chan_timer(chan, L2CAP_MOVE_TIMEOUT);
> +			} else if (chan->move_role ==
> +				   L2CAP_MOVE_ROLE_RESPONDER) {
> +				chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
> +				l2cap_send_move_chan_rsp(chan->conn,
> +							 chan->ident,
> +							 chan->dcid,
> +							 L2CAP_MR_SUCCESS);
> +			}
> +			break;
> +		default:
> +			/* Move was not in expected state, free the channel */
> +			chan->hs_hchan = NULL;
> +			chan->hs_hcon = NULL;
> +
> +			/* Placeholder - free the logical link */
> +
> +			chan->move_state = L2CAP_MOVE_STABLE;
> +		}
> +	}
>  }
>  

I find this this function still a little bit too complex. Any chance we
can split into more logical pieces. It is fine if not, but we should at
least give it another try.

Regards

Marcel


--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux