[PATCHv2 05/19] Bluetooth: Channel move request handling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On receipt of a channel move request, the request must be validated
based on the L2CAP mode, connection state, and controller
capabilities.  ERTM channels must have their state machines cleared
and transmission paused while the channel move takes place.

If the channel is being moved to an AMP controller then
an AMP physical link must be prepared.  Moving the channel back to
BR/EDR proceeds immediately.

Signed-off-by: Mat Martineau <mathewm@xxxxxxxxxxxxxx>
Acked-by: Marcel Holtmann <marcel@xxxxxxxxxxxx>
---
 net/bluetooth/l2cap_core.c | 108 ++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 107 insertions(+), 1 deletion(-)

diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b5b849b..2fb0567 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -734,6 +734,12 @@ static void l2cap_send_cmd(struct l2cap_conn *conn, u8 ident, u8 code, u16 len,
 	hci_send_acl(conn->hchan, skb, flags);
 }
 
+static bool __chan_is_moving(struct l2cap_chan *chan)
+{
+	return chan->move_state != L2CAP_MOVE_STABLE &&
+	       chan->move_state != L2CAP_MOVE_WAIT_PREPARE;
+}
+
 static void l2cap_do_send(struct l2cap_chan *chan, struct sk_buff *skb)
 {
 	struct hci_conn *hcon = chan->conn->hcon;
@@ -995,6 +1001,41 @@ void l2cap_send_conn_req(struct l2cap_chan *chan)
 	l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
 }
 
+static void l2cap_move_setup(struct l2cap_chan *chan)
+{
+	struct sk_buff *skb;
+
+	BT_DBG("chan %p", chan);
+
+	if (chan->mode != L2CAP_MODE_ERTM)
+		return;
+
+	__clear_retrans_timer(chan);
+	__clear_monitor_timer(chan);
+	__clear_ack_timer(chan);
+
+	chan->retry_count = 0;
+	skb_queue_walk(&chan->tx_q, skb) {
+		if (bt_cb(skb)->control.retries)
+			bt_cb(skb)->control.retries = 1;
+		else
+			break;
+	}
+
+	chan->expected_tx_seq = chan->buffer_seq;
+
+	clear_bit(CONN_REJ_ACT, &chan->conn_state);
+	clear_bit(CONN_SREJ_ACT, &chan->conn_state);
+	l2cap_seq_list_clear(&chan->retrans_list);
+	l2cap_seq_list_clear(&chan->srej_list);
+	skb_queue_purge(&chan->srej_q);
+
+	chan->tx_state = L2CAP_TX_STATE_XMIT;
+	chan->rx_state = L2CAP_RX_STATE_MOVE;
+
+	set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
+}
+
 static void l2cap_chan_ready(struct l2cap_chan *chan)
 {
 	/* This clears all conf flags, including CONF_NOT_COMPLETE */
@@ -4169,9 +4210,74 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
 	if (!enable_hs)
 		return -EINVAL;
 
-	/* Placeholder: Always refuse */
+	chan = l2cap_get_chan_by_dcid(conn, icid);
+
+	if (!chan || chan->scid < L2CAP_CID_DYN_START ||
+	    chan->chan_policy == BT_CHANNEL_POLICY_BREDR_ONLY ||
+	    (chan->mode != L2CAP_MODE_ERTM &&
+	     chan->mode != L2CAP_MODE_STREAMING)) {
+		result = L2CAP_MR_NOT_ALLOWED;
+		goto send_move_response;
+	}
+
+	if (chan->local_amp_id == req->dest_amp_id) {
+		result = L2CAP_MR_SAME_ID;
+		goto send_move_response;
+	}
+
+	if (req->dest_amp_id) {
+		struct hci_dev *hdev;
+		hdev = hci_dev_get(req->dest_amp_id);
+		if (!hdev || hdev->dev_type != HCI_AMP ||
+		    !test_bit(HCI_UP, &hdev->flags)) {
+			if (hdev)
+				hci_dev_put(hdev);
+
+			result = L2CAP_MR_BAD_ID;
+			goto send_move_response;
+		}
+		hci_dev_put(hdev);
+	}
+
+	/* Detect a move collision.  Only send a collision response
+	 * if this side has "lost", otherwise proceed with the move.
+	 * The winner has the larger bd_addr.
+	 */
+	if ((__chan_is_moving(chan) ||
+	     chan->move_role != L2CAP_MOVE_ROLE_NONE) &&
+	    bacmp(conn->src, conn->dst) > 0) {
+		result = L2CAP_MR_COLLISION;
+		goto send_move_response;
+	}
+
+	chan->ident = cmd->ident;
+	chan->move_role = L2CAP_MOVE_ROLE_RESPONDER;
+	l2cap_move_setup(chan);
+	chan->move_id = req->dest_amp_id;
+	icid = chan->dcid;
+
+	if (req->dest_amp_id == 0) {
+		/* Moving to BR/EDR */
+		if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+			chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+			result = L2CAP_MR_PEND;
+		} else {
+			chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+			result = L2CAP_MR_SUCCESS;
+		}
+	} else {
+		chan->move_state = L2CAP_MOVE_WAIT_PREPARE;
+		/* Placeholder - uncomment when amp functions are available */
+		/*amp_accept_physical(chan, req->dest_amp_id);*/
+		result = L2CAP_MR_PEND;
+	}
+
+send_move_response:
 	l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
 
+	if (chan)
+		l2cap_chan_unlock(chan);
+
 	return 0;
 }
 
-- 
1.7.12.3

--
Mat Martineau

Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux