Hi David, On Fri, Sep 14, 2012 at 6:04 AM, David Dillow <dave@xxxxxxxxxxxxxx> wrote: > We also gain support for the Logitech Harmony Adapter for PS3. > > Signed-off-by: David Dillow <dave@xxxxxxxxxxxxxx> > -- > drivers/hid/Kconfig | 7 + > drivers/hid/Makefile | 1 + > drivers/hid/hid-core.c | 2 + > drivers/hid/hid-ps3remote.c | 325 +++++++++++++++++++++++++++++++++++++++++++ > 4 files changed, 335 insertions(+), 0 deletions(-) > > On Thu, 2012-09-13 at 00:36 +0200, Antonio Ospite wrote: > On Wed, 12 Sep 2012 22:26:04 +0200 David Herrmann wrote: >> > So if the devices only need some short setup-command during >> > initialization and then they send HID reports whenever a button is >> > pressed, then everything should be very easy to get working. Even >> > auto-reconnect and 10min idle-disconnect are _very_ easy to get >> > working in the kernel with the current HID infrastructure. >> >> I too will take a look during the week-end about writing a kernel >> driver, if it's not that much of an effort I might take the project >> (no promises yet). I have a PS3 BD remote Bastien donated. > > Here's a first pass at a kernel driver to support the BD remote and > Harmony PS adapter. I've tested it on Fedora 16 with single keypresses > only, as I cannot send multiple simultaneous keypresses with the > Harmony. This patch is against kernel.org's bluetooth.git as of an hour > ago, but should apply to other versions without much fuss. Great that you are looking into it. > Antonio, if you could test this with the real remote you have, I'd be > very appreciative. > > David, could you point me at the controls for the 10min idle-disconnect? I suppose we can just continue using input.conf:IdleTimeout (which passed via ioctl in the struct hidp_connadd_req.idle_to) or do you think this would be useful for other transports, at least for USB it does not make much sense since the cable will stay connected. > auto-connect and idle-disconnect seem to be working on my Fedora 16 box, > though it looks like the Harmony adapter is initiating the disconnect -- > this is likely an area for improvement with the Sony remote. Btw, it would probably be a good to add a proper defines for 0x0306 e.g. USB_DEVICE_ID_SONY_PS3_REMOTE and USB_DEVICE_ID_LOGITECH_HARMONY_ADAPTER -- Luiz Augusto von Dentz -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
