Hi, On Wed, Aug 29, 2012 at 09:20:34AM +0200, Vellemans, Noel wrote: > Hi, > > It is an EXTERNAL USB-device plugged in manually, and if it is plugged > in, the device is recognized. Do you have bluetoothd running? Best regards Andrei Emeltchenko > > > Regards Noel > > << log>> > > Plug in device ... Results in.... > > > # usb wakeup is here > usb 2-1: new full speed USB device using fsl-ehci and address 4 > usb 2-1: New USB device found, idVendor=0a12, idProduct=0001 > usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 > > # > > # lsusb > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 002: ID 0eef:7304 D-WAV Scientific Co., Ltd > Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth > Dongle (HCI mode) > > > # hciconfig > hci0: Type: BR/EDR Bus: USB > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:0 acl:0 sco:0 commands:0 errors:0 > > > -----Original Message----- > From: Andrei Emeltchenko [mailto:andrei.emeltchenko.news@xxxxxxxxx] > Sent: 29Aug12 09:15 > To: Vellemans, Noel > Cc: linux-bluetooth@xxxxxxxxxxxxxxx > Subject: Re: Which software is responsible for bringing the devices > (hci0 .. hcix) up ? > > Hi Noel, > > On Wed, Aug 29, 2012 at 09:12:18AM +0200, Vellemans, Noel wrote: > > Hi Andrei, > > > > Any clue what the reason can be, that the device is not comming 'UP' > > automatically ? > > It is powered off automatically. > > Best regards > Andrei Emeltchenko > > > > > > > Regards Noel > > > > > > -----Original Message----- > > From: Andrei Emeltchenko [mailto:andrei.emeltchenko.news@xxxxxxxxx] > > Sent: 29Aug12 09:09 > > To: Vellemans, Noel > > Cc: linux-bluetooth@xxxxxxxxxxxxxxx > > Subject: Re: Which software is responsible for bringing the devices > > (hci0 .. hcix) up ? > > > > Hi Noel, > > > > On Wed, Aug 29, 2012 at 08:58:12AM +0200, Vellemans, Noel wrote: > > > Hi, > > > > > > > > > I have a simple question, I think, But I do not manage to find the > > > answer into the old mailing-list-posts. > > > > > > I'm using bluez-4.99 and Linux kernel 2.6.35.3. > > > > > > When plugging in a device (CSR-device) the device is recognized but > > > it > > > > > is not 'UP'. > > > > > > Can someone tell me what piece of software is NORMALLY setting the > > > device into the 'UP' state? > > > (so that I do not have to type hciconfig hci0 up) > > > > bluetoothd > > > > Best regards > > Andrei Emeltchenko > > -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
