Add support for config files to manipulate the loaded sequence.
A config file can be specified with the new -c command line parameter.
The config syntax is:
scope attr=value[,attr=value,...]
e.g.:
all delta=300,action=replay
1-4 action=emulate
1 delta=500
HCI_EVT_0x0e delta=0
HCI_CMD_0x03|0x0003 action=emulate
HCI_ACL action=replay
The inital version supports the attributes delta and action and
all scope types shown in the example.
HCISEQ_ACTION_SKIP allows to skip a packet in the sequence.
The action can be set in config files using "action=skip".
---
v1 -> v2: delete_type_cfg() was using an outdated number of entries when
freeing type_cfg.cmd[]
Makefile.tools | 1 +
tools/replay/config-parser.c | 506 ++++++++++++++++++++++++++++++++++++++++++
tools/replay/config-parser.h | 36 +++
tools/replay/hciseq.h | 3 +-
tools/replay/main.c | 117 +++++++++-
tools/replay/main.h | 2 -
6 files changed, 661 insertions(+), 4 deletions(-)
create mode 100644 tools/replay/config-parser.c
create mode 100644 tools/replay/config-parser.h
diff --git a/Makefile.tools b/Makefile.tools
index 8b3c8d8..ba2db00 100644
--- a/Makefile.tools
+++ b/Makefile.tools
@@ -72,6 +72,7 @@ emulator_btvirt_SOURCES = emulator/main.c monitor/bt.h \
tools_replay_btreplay_SOURCES = tools/replay/main.h tools/replay/main.c \
tools/replay/hciseq.h tools/replay/hciseq.c \
tools/replay/time.h tools/replay/time.c \
+ tools/replay/config-parser.h tools/replay/config-parser.c \
monitor/packet.h monitor/packet.c \
monitor/btsnoop.h monitor/btsnoop.c \
monitor/control.h monitor/control.c \
diff --git a/tools/replay/config-parser.c b/tools/replay/config-parser.c
new file mode 100644
index 0000000..5219eb9
--- /dev/null
+++ b/tools/replay/config-parser.c
@@ -0,0 +1,506 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ * Copyright (C) 2012 Anton Weber <ant@xxxxxxxxx>
+ * Copyright (C) 2004-2010 Marcel Holtmann <marcel@xxxxxxxxxxxx>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <errno.h>
+#include <stdbool.h>
+#include <sys/time.h>
+
+#include "config-parser.h"
+#include "lib/bluetooth.h"
+#include "lib/hci.h"
+#include "monitor/bt.h"
+
+#define MAXLINE 128
+#define MAX_ATTR_KEY 32
+#define MAX_ATTR_VAL 32
+
+static struct hciseq_list *seq;
+static struct hciseq_type_cfg *type_cfg;
+
+static bool verbose;
+static int line;
+
+struct scope_list {
+ struct scope_node *head;
+};
+
+struct scope_node {
+ int pos;
+ struct hciseq_attr *attr;
+ struct scope_node *next;
+};
+
+struct attr_list {
+ struct attr_node *head;
+};
+
+struct attr_node {
+ char key[MAX_ATTR_KEY];
+ char val[MAX_ATTR_VAL];
+ struct attr_node *next;
+};
+
+static void attr_list_delete(struct attr_list *list)
+{
+ struct attr_node *node, *next;
+
+ if (list == NULL)
+ return;
+
+ node = list->head;
+ free(list);
+ while (node != NULL) {
+ next = node->next;
+ free(node);
+ node = next;
+ }
+}
+
+static void scope_list_delete(struct scope_list *list)
+{
+ struct scope_node *node, *next;
+
+ if (list == NULL)
+ return;
+
+ node = list->head;
+ free(list);
+ while (node != NULL) {
+ next = node->next;
+ free(node);
+ node = next;
+ }
+}
+
+static struct attr_list *parse_attrstr(char *attrstr)
+{
+ struct attr_list *list = NULL;
+ struct attr_node *node;
+ char *res;
+
+ do {
+ if (list == NULL) {
+ if ((res = strtok(attrstr, "=")) == NULL) {
+ /* nothing to parse */
+ return NULL;
+ }
+
+ list = malloc(sizeof(*list));
+ node = malloc(sizeof(*node));
+ list->head = node;
+ } else {
+ if ((res = strtok(NULL, "=")) == NULL) {
+ /* nothing left to parse */
+ break;
+ }
+
+ node->next = malloc(sizeof(*node));
+ node = node->next;
+ }
+
+ strncpy(node->key, res, sizeof(node->key));
+ node->key[sizeof(node->key) - 1] = '\0';
+
+ if ((res = strtok(NULL, ",")) == NULL) {
+ fprintf(stderr, "Invalid attribute");
+ goto err;
+ }
+ strncpy(node->val, res, sizeof(node->val));
+ node->val[sizeof(node->val) - 1] = '\0';
+
+ node->next = NULL;
+ } while (res != NULL);
+
+ return list;
+
+err:
+ attr_list_delete(list);
+ return NULL;
+}
+
+static int apply_attr(struct scope_node *scope_node,
+ struct attr_list *list)
+{
+ struct attr_node *attr_node = list->head;
+ struct hciseq_attr *attr = scope_node->attr;
+ long lval;
+
+ while (attr_node != NULL) {
+ if (strcmp(attr_node->key, "delta") == 0) {
+ /* delta */
+ lval = strtol(attr_node->val, NULL, 10);
+ if (errno == ERANGE || errno == EINVAL)
+ return 1;
+
+ if (verbose) {
+ printf("\t[%d] set delta to %ld\n",
+ scope_node->pos, lval);
+ }
+
+ attr->ts_diff.tv_sec = 0;
+ attr->ts_diff.tv_usec = lval;
+ } else if (strcmp(attr_node->key, "action") == 0) {
+ /* action */
+ if (strcmp(attr_node->val, "replay") == 0) {
+ lval = HCISEQ_ACTION_REPLAY;
+ if (verbose)
+ printf("\t[%d] set action to 'replay'\n",
+ scope_node->pos);
+ } else if (strcmp(attr_node->val, "emulate") == 0) {
+ lval = HCISEQ_ACTION_EMULATE;
+ if (verbose)
+ printf("\t[%d] set action to 'emulate'\n",
+ scope_node->pos);
+ } else if (strcmp(attr_node->val, "skip") == 0) {
+ lval = HCISEQ_ACTION_SKIP;
+ if (verbose)
+ printf("\t[%d] set action to 'skip'\n",
+ scope_node->pos);
+ } else {
+ return 1;
+ }
+
+ attr->action = lval;
+ }
+
+ attr_node = attr_node->next;
+ }
+
+ return 0;
+}
+
+static int apply_attr_scope(struct scope_list *scope,
+ struct attr_list *attr)
+{
+ struct scope_node *node = scope->head;
+
+ while (node != NULL) {
+ apply_attr(node, attr);
+ node = node->next;
+ }
+
+ return 0;
+}
+
+static struct scope_list *get_scope_range(int from, int to)
+{
+ struct scope_list *list = NULL;
+ struct scope_node *scope_node;
+ struct hciseq_node *seq_node = seq->current;
+ int pos = 1;
+
+ /* forward to 'from' */
+ while (pos < from) {
+ seq_node = seq_node->next;
+ pos++;
+ }
+
+ /* create scope list for range */
+ while (pos <= to) {
+ if (verbose)
+ printf("\tadd packet [%d]\n", pos);
+
+ if (list == NULL) {
+ list = malloc(sizeof(*list));
+ scope_node = malloc(sizeof(*scope_node));
+ list->head = scope_node;
+ } else {
+ scope_node->next = malloc(sizeof(*scope_node));
+ scope_node = scope_node->next;
+ }
+ scope_node->attr = seq_node->attr;
+ scope_node->pos = pos;
+ scope_node->next = NULL;
+
+ seq_node = seq_node->next;
+ pos++;
+ }
+
+ return list;
+}
+
+static struct scope_list *get_scope_type(uint8_t type, void *filter1,
+ void *filter2)
+{
+ struct scope_list *list = NULL;
+ struct scope_node *scope_node;
+ struct hciseq_node *seq_node = seq->current;
+ uint16_t opcode, node_opcode;
+ uint8_t node_ogf, ogf = 0x00;
+ uint16_t node_ocf, ocf = 0x0000;
+ uint8_t node_evt, evt = 0x00;
+ bool match;
+ int pos = 1;
+ struct hciseq_attr *attr;
+
+ if (type == BT_H4_CMD_PKT) {
+ ogf = *((uint8_t *) filter1);
+ ocf = *((uint16_t *) filter2);
+ opcode = cmd_opcode_pack(ogf, ocf);
+
+ if (opcode > 0x2FFF) {
+ attr = NULL;
+ } else {
+ attr = type_cfg->cmd[opcode];
+ if (attr == NULL) {
+ attr = malloc(sizeof(*attr));
+ type_cfg->cmd[opcode] = attr;
+ }
+ }
+ } else if (type == BT_H4_EVT_PKT) {
+ evt = *((uint8_t *) filter1);
+ attr = type_cfg->evt[evt];
+
+ if (attr == NULL) {
+ attr = malloc(sizeof(*attr));
+ type_cfg->evt[evt] = attr;
+ }
+ } else if (type == BT_H4_ACL_PKT) {
+ attr = type_cfg->acl;
+ if (attr == NULL) {
+ attr = malloc(sizeof(*attr));
+ type_cfg->acl = attr;
+ }
+ } else {
+ attr = NULL;
+ }
+
+ /* add matching packets in sequence */
+ while (seq_node != NULL) {
+ match = false;
+ if (((uint8_t *) seq_node->frame->data)[0] == type) {
+ if (type == BT_H4_CMD_PKT) {
+ node_opcode = *((uint16_t *)
+ (seq_node->frame->data + 1));
+ node_ogf = cmd_opcode_ogf(node_opcode);
+ node_ocf = cmd_opcode_ocf(node_opcode);
+ if (node_ogf == ogf && node_ocf == ocf)
+ match = true;
+ } else if (type == BT_H4_EVT_PKT) {
+ node_evt = ((uint8_t *) seq_node->frame->data)[1];
+ if (evt == node_evt)
+ match = true;
+ } else if (type == BT_H4_ACL_PKT) {
+ match = true;
+ }
+ }
+
+ if (match) {
+ if (verbose)
+ printf("\tadd packet [%d]\n", pos);
+
+ if (list == NULL) {
+ list = malloc(sizeof(*list));
+ scope_node = malloc(sizeof(*scope_node));
+ list->head = scope_node;
+ } else {
+ scope_node->next = malloc(sizeof(*scope_node));
+ scope_node = scope_node->next;
+ }
+ scope_node->attr = seq_node->attr;
+ scope_node->pos = pos;
+ scope_node->next = NULL;
+ }
+ seq_node = seq_node->next;
+ pos++;
+ }
+
+ /* add type config */
+ if (attr != NULL) {
+ if (list == NULL) {
+ list = malloc(sizeof(*list));
+ scope_node = malloc(sizeof(*scope_node));
+ list->head = scope_node;
+ } else {
+ scope_node->next = malloc(sizeof(*scope_node));
+ scope_node = scope_node->next;
+ }
+
+ scope_node->attr = attr;
+ scope_node->pos = 0;
+ scope_node->next = NULL;
+ }
+
+ return list;
+}
+
+static int parse_line(char *buf)
+{
+ char *scopestr, *attrstr;
+ struct scope_list *scope_list = NULL;
+ struct attr_list *attr_list;
+ uint8_t evt, ogf;
+ uint16_t ocf;
+ char *res;
+ int from, to;
+
+ line++;
+
+ /* split line into scope and attributes */
+ if ((scopestr = strtok(buf, " ")) == NULL)
+ return 1;
+
+ if ((attrstr = strtok(NULL, "\n")) == NULL)
+ return 1;
+
+ if (verbose)
+ printf("Parsing scope (%s)\n", scopestr);
+
+ if (strcmp(scopestr, "all") == 0) {
+ if (verbose)
+ printf("\tadd all\n");
+
+ scope_list = get_scope_range(0, seq->len);
+ } else if ((strncmp(scopestr, "HCI_", 4) == 0) && strlen(scopestr) >= 7) {
+ /* make sure scopestr is at least 7 chars long, so we can check for HCI_XXX */
+
+ if (strncmp(scopestr + 4, "ACL", 3) == 0) {
+ /* scope is HCI_ACL */
+ if (verbose)
+ printf("\tadd all HCI ACL data packets:");
+
+ scope_list = get_scope_type(BT_H4_ACL_PKT, NULL, NULL);
+ } else if (strncmp(scopestr + 4, "CMD", 3) == 0) {
+ /* scope is HCI_CMD_
+ * length must be exactly 19 (e.g. HCI_CMD_0x03|0x0003) */
+ if (strlen(scopestr) != 19 || scopestr[12] != '|')
+ return 1;
+
+ if (sscanf(scopestr + 8, "0x%2hhx", &ogf) <= 0)
+ return 1;
+
+ if (sscanf(scopestr + 13, "0x%4hx", &ocf) <= 0)
+ return 1;
+
+ if (verbose)
+ printf("\tadd all HCI command packets with opcode (0x%2.2x|0x%4.4x):\n",
+ ogf, ocf);
+
+ scope_list = get_scope_type(BT_H4_CMD_PKT, &ogf, &ocf);
+ } else if (strncmp(scopestr + 4, "EVT", 3) == 0) {
+ /* scope is CMD_EVT_
+ * length must be exactly 12 (e.g. HCI_EVT_0x0e) */
+ if (strlen(scopestr) != 12)
+ return 1;
+
+ if (sscanf(scopestr + 8, "0x%2hhx", &evt) <= 0)
+ return 1;
+
+ if (verbose)
+ printf("\tadd all HCI event packets with event type (0x%2.2x):\n",
+ evt);
+
+ scope_list = get_scope_type(BT_H4_EVT_PKT, &evt, NULL);
+ }
+ } else if (scopestr[0] >= 48 || scopestr[0] <= 57) {
+ /* first char is a digit */
+ if ((res = strtok(scopestr, "-")) == NULL)
+ return 1;
+
+ from = atoi(res);
+ if (from <= 0)
+ return 1;
+
+ if ((res = strtok(NULL, ":")) == NULL) {
+ /* just one packet */
+ if (verbose)
+ printf("\tadd packet single packet\n");
+
+ scope_list = get_scope_range(from, from);
+ } else {
+ /* range */
+ to = atoi(res);
+ if (to > seq->len)
+ return 1;
+
+ if (verbose)
+ printf("\tadd packets %d to %d\n", from, to);
+
+ scope_list = get_scope_range(from, to);
+ }
+
+ }
+
+ if (verbose)
+ printf("Parsing attributes (%s)\n", attrstr);
+
+ if ((attr_list = parse_attrstr(attrstr)) == NULL) {
+ return 1;
+ }
+
+ if (scope_list != NULL) {
+ apply_attr_scope(scope_list, attr_list);
+ scope_list_delete(scope_list);
+ } else {
+ if (verbose)
+ printf("Empty scope, skipping\n");
+ }
+
+ attr_list_delete(attr_list);
+
+ return 0;
+}
+
+int parse_config(char *path, struct hciseq_list *_seq,
+ struct hciseq_type_cfg *_type_cfg, bool _verbose)
+{
+ char *buf;
+ FILE *file;
+
+ seq = _seq;
+ type_cfg = _type_cfg;
+ verbose = _verbose;
+ line = 0;
+
+ printf("Reading config file...\n");
+
+ buf = malloc(sizeof(char) * MAXLINE);
+ if (buf == NULL) {
+ fprintf(stderr, "Failed to allocate buffer\n");
+ return 1;
+ }
+
+ if ((file = fopen(path, "r")) == NULL) {
+ perror("Failed to open config file");
+ return 1;
+ }
+
+ while (fgets(buf, MAXLINE, file) != NULL) {
+ if (parse_line(buf)) {
+ fprintf(stderr, "Error parsing config file - line %d\n",
+ line);
+ free(buf);
+ return 1;
+ }
+ }
+
+ printf("Done\n\n");
+ fclose(file);
+ free(buf);
+
+ return 0;
+}
diff --git a/tools/replay/config-parser.h b/tools/replay/config-parser.h
new file mode 100644
index 0000000..265628d
--- /dev/null
+++ b/tools/replay/config-parser.h
@@ -0,0 +1,36 @@
+/*
+ *
+ * BlueZ - Bluetooth protocol stack for Linux
+ * Copyright (C) 2012 Anton Weber <ant@xxxxxxxxx>
+ * Copyright (C) 2004-2010 Marcel Holtmann <marcel@xxxxxxxxxxxx>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include "hciseq.h"
+
+struct hciseq_type_cfg {
+ struct hciseq_attr *cmd[9216]; /*
+ * opcodes 0x0000 - 0x23FF
+ * (OGF 0x01 - 0x08)
+ */
+ struct hciseq_attr *evt[256]; /* events 0x00 - 0xFF */
+ struct hciseq_attr *acl;
+};
+
+int parse_config(char *path, struct hciseq_list *_seq,
+ struct hciseq_type_cfg *_type_cfg, bool _verbose);
diff --git a/tools/replay/hciseq.h b/tools/replay/hciseq.h
index 1454147..fa589a3 100644
--- a/tools/replay/hciseq.h
+++ b/tools/replay/hciseq.h
@@ -43,7 +43,8 @@ struct frame {
enum hciseq_action {
HCISEQ_ACTION_REPLAY = 0,
- HCISEQ_ACTION_EMULATE = 1
+ HCISEQ_ACTION_EMULATE = 1,
+ HCISEQ_ACTION_SKIP = 2
};
struct hciseq_list {
diff --git a/tools/replay/main.c b/tools/replay/main.c
index b80eb7f..b9597be 100644
--- a/tools/replay/main.c
+++ b/tools/replay/main.c
@@ -41,6 +41,7 @@
#include "main.h"
#include "time.h"
+#include "config-parser.h"
#include "lib/bluetooth.h"
#include "lib/hci.h"
#include "emulator/btdev.h"
@@ -56,6 +57,7 @@
#define TIMING_DELTA 1
static struct hciseq_list dumpseq;
+static struct hciseq_type_cfg type_cfg;
static int fd;
static int pos = 1;
@@ -281,6 +283,35 @@ static void btdev_recv(struct frame *frm)
btdev_receive_h4(btdev, frm->data, frm->data_len);
}
+static struct hciseq_attr *get_type_attr(struct frame *frm)
+{
+ uint8_t pkt_type = ((const uint8_t *) frm->data)[0];
+ uint16_t opcode;
+ uint8_t evt;
+
+ switch (pkt_type) {
+ case BT_H4_CMD_PKT:
+ opcode = *((uint16_t *) (frm->data + 1));
+ if (opcode > 0x2FFF)
+ return NULL;
+ return type_cfg.cmd[opcode];
+ case BT_H4_EVT_PKT:
+ evt = *((uint8_t *) (frm->data + 1));
+
+ /* use attributes of opcode for 'Command Complete' events */
+ if (evt == 0x0e) {
+ opcode = *((uint16_t *) (frm->data + 4));
+ return type_cfg.cmd[opcode];
+ }
+
+ return type_cfg.evt[evt];
+ case BT_H4_ACL_PKT:
+ return type_cfg.acl;
+ default:
+ return NULL;
+ }
+}
+
static bool check_match(struct frame *l, struct frame *r, char *msg)
{
uint8_t type_l = ((const uint8_t *) l->data)[0];
@@ -341,6 +372,7 @@ static bool process_in()
{
static struct frame frm;
static uint8_t data[HCI_MAX_FRAME_SIZE];
+ struct hciseq_attr *attr;
int n;
bool match;
char msg[MAX_MSG];
@@ -362,6 +394,38 @@ static bool process_in()
msg[0] = '\0';
match = check_match(dumpseq.current->frame, &frm, msg);
+ /* check type config */
+ attr = get_type_attr(&frm);
+ if (attr != NULL) {
+ if (attr->action == HCISEQ_ACTION_SKIP) {
+ if (match) {
+ printf("[%4d/%4d] SKIPPING\n", pos,
+ dumpseq.len);
+ return 1;
+ } else {
+ printf("[ Unknown ] %s\n ",
+ msg);
+ dump_frame(&frm);
+ printf(" SKIPPING\n");
+ return 0;
+ }
+ }
+ if (attr->action == HCISEQ_ACTION_EMULATE) {
+ if (match) {
+ printf("[%4d/%4d] EMULATING\n", pos,
+ dumpseq.len);
+ } else {
+ printf("[ Unknown ] %s\n ",
+ msg);
+ printf("EMULATING\n");
+ }
+
+ btdev_recv(&frm);
+
+ return match;
+ }
+ }
+
/* process packet if match */
if (match) {
printf("[%4d/%4d] ", pos, dumpseq.len);
@@ -381,12 +445,20 @@ static bool process_in()
static bool process_out()
{
uint8_t pkt_type;
+ struct hciseq_attr *attr;
/* emulator sends response automatically */
if (dumpseq.current->attr->action == HCISEQ_ACTION_EMULATE) {
return 1;
}
+ /* use type config if set */
+ attr = get_type_attr(dumpseq.current->frame);
+ if (attr != NULL) {
+ if (attr->action == HCISEQ_ACTION_SKIP || attr->action == HCISEQ_ACTION_EMULATE)
+ return true;
+ }
+
pkt_type = ((const uint8_t *) dumpseq.current->frame->data)[0];
switch (pkt_type) {
@@ -412,6 +484,15 @@ static void process()
gettimeofday(&last, NULL);
do {
+ if (dumpseq.current->attr->action == HCISEQ_ACTION_SKIP) {
+ printf("[%4d/%4d] SKIPPING\n ", pos,
+ dumpseq.len);
+ dump_frame(dumpseq.current->frame);
+ dumpseq.current = dumpseq.current->next;
+ pos++;
+ continue;
+ }
+
/* delay */
if (timing == TIMING_DELTA) {
/* consider exec time of process_out()/process_in() */
@@ -485,6 +566,19 @@ static void delete_list()
}
}
+static void delete_type_cfg()
+{
+ int i;
+
+ for (i = 0; i < 9216; i++) {
+ free(type_cfg.cmd[i]);
+ }
+ for (i = 0; i < 256; i++) {
+ free(type_cfg.evt[i]);
+ }
+ free(type_cfg.acl);
+}
+
static void usage(void)
{
printf("hcireplay - Bluetooth replayer\n"
@@ -493,6 +587,7 @@ static void usage(void)
"\t-d, --timing={none|delta} Specify timing mode\n"
"\t-m, --factor=<value> Use timing modifier\n"
"\t-t, --timeout=<value> Use timeout when receiving\n"
+ "\t-c, --config=<file> Use config file\n"
"\t-v, --verbose Enable verbose output\n"
"\t --version Give version information\n"
"\t --help Give a short usage message\n");
@@ -502,6 +597,7 @@ static const struct option main_options[] = {
{"timing", required_argument, NULL, 'd'},
{"factor", required_argument, NULL, 'm'},
{"timeout", required_argument, NULL, 't'},
+ {"config", required_argument, NULL, 'c'},
{"verbose", no_argument, NULL, 'v'},
{"version", no_argument, NULL, 'V'},
{"help", no_argument, NULL, 'H'},
@@ -512,11 +608,12 @@ int main(int argc, char *argv[])
{
int dumpfd;
int i;
+ char *config = NULL;
while (1) {
int opt;
- opt = getopt_long(argc, argv, "d:m:t:v",
+ opt = getopt_long(argc, argv, "d:m:t:c:v",
main_options, NULL);
if (opt < 0)
break;
@@ -535,6 +632,9 @@ int main(int argc, char *argv[])
case 't':
timeout = atoi(optarg);
break;
+ case 'c':
+ config = optarg;
+ break;
case 'v':
verbose = true;
break;
@@ -572,6 +672,20 @@ int main(int argc, char *argv[])
dumpseq.current = dumpseq.frames;
calc_rel_ts(&dumpseq);
+ /* init type config */
+ for (i = 0; i < 9216; i++)
+ type_cfg.cmd[i] = NULL;
+ for (i = 0; i < 256; i++)
+ type_cfg.evt[i] = NULL;
+ type_cfg.acl = NULL;
+
+ if (config != NULL) {
+ if (parse_config(config, &dumpseq, &type_cfg, verbose)) {
+ vhci_close();
+ return 1;
+ }
+ }
+
/* init emulator */
btdev = btdev_create(0);
btdev_set_send_handler(btdev, btdev_send, NULL);
@@ -595,6 +709,7 @@ int main(int argc, char *argv[])
vhci_close();
btdev_destroy(btdev);
delete_list();
+ delete_type_cfg();
printf("Terminating\n");
return EXIT_SUCCESS;
diff --git a/tools/replay/main.h b/tools/replay/main.h
index 2223789..e8b7365 100644
--- a/tools/replay/main.h
+++ b/tools/replay/main.h
@@ -23,8 +23,6 @@
*
*/
-#include "hciseq.h"
-
struct btsnoop_hdr {
uint8_t id[8]; /* Identification Pattern */
uint32_t version; /* Version Number = 1 */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
