HCI_QUIRK_NO_RESET name is misleading - purpose of this quirk is to
reset device on close instead of init, not to not reset at all.
Rename it to HCI_QUIRK_RESET_ON_CLOSE to avoid confusion.
Signed-off-by: Szymon Janc <szymon.janc@xxxxxxxxx>
---
drivers/bluetooth/bpa10x.c | 2 +-
drivers/bluetooth/btusb.c | 6 +++---
drivers/bluetooth/hci_ldisc.c | 2 +-
include/net/bluetooth/hci.h | 2 +-
net/bluetooth/hci_core.c | 4 ++--
5 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index d894340..457f4e6 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -470,7 +470,7 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
hdev->flush = bpa10x_flush;
hdev->send = bpa10x_send_frame;
- set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
err = hci_register_dev(hdev);
if (err < 0) {
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index cb480f1..de87b12 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1026,7 +1026,7 @@ static int btusb_probe(struct usb_interface *intf,
data->isoc = usb_ifnum_to_if(data->udev, 1);
if (!reset)
- set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (force_scofix || id->driver_info & BTUSB_WRONG_SCO_MTU) {
if (!disable_scofix)
@@ -1038,7 +1038,7 @@ static int btusb_probe(struct usb_interface *intf,
if (id->driver_info & BTUSB_DIGIANSWER) {
data->cmdreq_type = USB_TYPE_VENDOR;
- set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_CSR) {
@@ -1046,7 +1046,7 @@ static int btusb_probe(struct usb_interface *intf,
/* Old firmware would otherwise execute USB reset */
if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x117)
- set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
}
if (id->driver_info & BTUSB_SNIFFER) {
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index e564579..2f9b796 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -394,7 +394,7 @@ static int hci_uart_register_dev(struct hci_uart *hu)
set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
if (!test_bit(HCI_UART_RESET_ON_INIT, &hu->hdev_flags))
- set_bit(HCI_QUIRK_NO_RESET, &hdev->quirks);
+ set_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
if (test_bit(HCI_UART_CREATE_AMP, &hu->hdev_flags))
hdev->dev_type = HCI_AMP;
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 66a7b57..97c57aa 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -58,7 +58,7 @@
/* HCI device quirks */
enum {
- HCI_QUIRK_NO_RESET,
+ HCI_QUIRK_RESET_ON_CLOSE,
HCI_QUIRK_RAW_DEVICE,
HCI_QUIRK_FIXUP_BUFFER_SIZE
};
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index d0a960d..0ed4edf 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -203,7 +203,7 @@ static void bredr_init(struct hci_dev *hdev)
/* Mandatory initialization */
/* Reset */
- if (!test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
+ if (!test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
set_bit(HCI_RESET, &hdev->flags);
hci_send_cmd(hdev, HCI_OP_RESET, 0, NULL);
}
@@ -792,7 +792,7 @@ static int hci_dev_do_close(struct hci_dev *hdev)
skb_queue_purge(&hdev->cmd_q);
atomic_set(&hdev->cmd_cnt, 1);
if (!test_bit(HCI_RAW, &hdev->flags) &&
- test_bit(HCI_QUIRK_NO_RESET, &hdev->quirks)) {
+ test_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks)) {
set_bit(HCI_INIT, &hdev->flags);
__hci_request(hdev, hci_reset_req, 0,
msecs_to_jiffies(250));
--
on behalf of ST-Ericsson
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
