Marcel.
Thank you for the comments.
I will update the code and send new patch soon.
Regarding the "--debug/-d" option, I will send a separate patch later.
Regards
Tedd
> Hi Tedd,
>
> > This patch enables the Intel Bluetooth device (UART sku) over the H4
> > protocol. It is responsible for bring up the device into known state by
> > configuring the baudrate and applying the patches, if required.
> >
> > ---
> >
> > Makefile.tools | 3 +-
> > tools/hciattach.8 | 3 +
> > tools/hciattach.c | 13 ++
> > tools/hciattach.h | 1 +
> > tools/hciattach_intel.c | 585
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++
> >
> > 5 files changed, 604 insertions(+), 1 deletion(-)
> > create mode 100644 tools/hciattach_intel.c
> >
> > diff --git a/Makefile.tools b/Makefile.tools
> > index cb0d1d0..4df7453 100644
> > --- a/Makefile.tools
> > +++ b/Makefile.tools
> > @@ -27,7 +27,8 @@ tools_hciattach_SOURCES = tools/hciattach.c
> > tools/hciattach.h \
> >
> > tools/hciattach_ti.c \
> > tools/hciattach_tialt.c \
> > tools/hciattach_ath3k.c \
> >
> > - tools/hciattach_qualcomm.c
> > + tools/hciattach_qualcomm.c \
> > + tools/hciattach_intel.c
> >
> > tools_hciattach_LDADD = lib/libbluetooth-private.la
> >
> > tools_hciconfig_SOURCES = tools/hciconfig.c tools/csr.h tools/csr.c \
> >
> > diff --git a/tools/hciattach.8 b/tools/hciattach.8
> > index e0e2730..cc97cad 100644
> > --- a/tools/hciattach.8
> > +++ b/tools/hciattach.8
> > @@ -89,6 +89,9 @@ Serial adapters using CSR chips with BCSP serial
> > protocol
> >
> > .TP
> > .B ath3k
> > Atheros AR300x based serial Bluetooth device
> >
> > +.TP
> > +.B intel
> > +Intel Bluetooth device
> >
> > .RE
> >
> > Supported IDs are (manufacturer id, product id)
> >
> > diff --git a/tools/hciattach.c b/tools/hciattach.c
> > index e0a9821..3e73956 100644
> > --- a/tools/hciattach.c
> > +++ b/tools/hciattach.c
> > @@ -131,6 +131,10 @@ static int uart_speed(int s)
> >
> > case 3500000:
> > return B3500000;
> >
> > #endif
> >
> > +#ifdef B3710000
> > + case 3710000
> > + return B3710000;
> > +#endif
> >
> > #ifdef B4000000
> >
> > case 4000000:
> > return B4000000;
> >
> > @@ -322,6 +326,11 @@ static int qualcomm(int fd, struct uart_t *u, struct
> > termios *ti)
> >
> > return qualcomm_init(fd, u->speed, ti, u->bdaddr);
> >
> > }
> >
> > +static int intel(int fd, struct uart_t *u, struct termios *ti)
> > +{
> > + return intel_init(fd, u->init_speed, &u->speed, ti);
> > +}
> > +
> >
> > static int read_check(int fd, void *buf, int count)
> > {
> >
> > int res;
> >
> > @@ -1137,6 +1146,10 @@ struct uart_t uart[] = {
> >
> > { "qualcomm", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
> >
> > FLOW_CTL, DISABLE_PM, NULL, qualcomm, NULL },
> >
> > + /* Intel Bluetooth Module */
> > + { "intel", 0x0000, 0x0000, HCI_UART_H4, 115200, 115200,
> > + FLOW_CTL, DISABLE_PM, NULL, intel, NULL },
> > +
> >
> > { NULL, 0 }
> >
> > };
> >
> > diff --git a/tools/hciattach.h b/tools/hciattach.h
> > index f8093ff..a24dbc4 100644
> > --- a/tools/hciattach.h
> > +++ b/tools/hciattach.h
> > @@ -56,3 +56,4 @@ int ath3k_init(int fd, int speed, int init_speed, char
> > *bdaddr,
> >
> > struct termios *ti);
> >
> > int ath3k_post(int fd, int pm);
> > int qualcomm_init(int fd, int speed, struct termios *ti, const char
> > *bdaddr);>
> > +int intel_init(int fd, int init_speed, int *speed, struct termios *ti);
> > diff --git a/tools/hciattach_intel.c b/tools/hciattach_intel.c
> > new file mode 100644
> > index 0000000..a629076
> > --- /dev/null
> > +++ b/tools/hciattach_intel.c
> > @@ -0,0 +1,585 @@
> > +/*
> > + * BlueZ - Bluetooth protocol stack for Linux
> > + *
> > + * Intel Bluetooth initialization module
>
> I was serious with that fact that I want the copyright/license
> statements common across all files. So why do you have to add your own
> extra comment here and break the style?
>
> > + *
> > + * Copyright (C) 2012 Intel Corporation. All rights reserved.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * along with this program; if not, write to the Free Software
> > + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
> > + * 02110-1301, USA.
> > + *
> > + */
> > +
> > +#ifdef HAVE_CONFIG_H
> > +#include <config.h>
> > +#endif
> > +
> > +#include <stdio.h>
> > +#include <stdlib.h>
> > +#include <unistd.h>
> > +#include <string.h>
> > +#include <errno.h>
> > +#include <fcntl.h>
> > +#include <sys/param.h>
> > +#include <sys/ioctl.h>
> > +#include <time.h>
> > +
> > +#include <bluetooth/bluetooth.h>
> > +#include <bluetooth/hci.h>
> > +#include <bluetooth/hci_lib.h>
> > +
> > +#include "hciattach.h"
> > +
> > +#ifdef INTEL_DEBUG
> > +#define DBGPRINT(x...) printf(x)
> > +#define PRINT_PACKET(buf, len) { \
> > + int i; \
> > + for (i = 0; i < len; i++) \
> > + printf("%02X ", buf[i]); \
> > + printf("\n"); \
> > + }
> > +#else
> > +#define DBGPRINT(x...)
> > +#define PRINT_PACKET(buf, len)
> > +#endif
>
> the more I look at this, the less I like it. I rather have a general
> debug switch --debug/-d to hciattach that sets a global debug on/off
> variable and that is used here. And we fix this once and for all for all
> manufactures.
>
> I think this got way too much out of hand. Since this is not your fault
> that this original code is bad, I would have it merged with these macros
> if you promise to fix it up in a later patch.
>
> > +
> > +#define PATCH_SEQ_EXT ".bseq"
> > +#define PATCH_FILE_PATH "/lib/firmware/intel/"
> > +#define PATCH_MAX_LEN 260
> > +#define PATCH_TYPE_CMD 1
> > +#define PATCH_TYPE_EVT 2
> > +
> > +#define INTEL_VER_PARAM_LEN 9
> > +#define INTEL_MFG_PARAM_LEN 2
> > +
> > +/**
> > + * A data structure for a patch entry.
> > + */
> > +struct _p_ent {
> > + int type;
> > + int len;
> > + unsigned char data[PATCH_MAX_LEN];
> > +};
>
> Coming to think about it, why not call it patch_entry.
>
> > +
> > +/**
> > + * A structure for patch context
> > + */
> > +struct _p_ctx {
> > + int dev;
> > + int fd;
> > + int patch_error;
> > + int reset_enable_patch;
> > +};
>
> And patch_ctx here. What is up with this _p prefix.
>
> > +
> > +/**
> > + * Send HCI command to the controller
> > + */
> > +static int intel_write_cmd(int dev, unsigned char *buf, int len)
> > +{
> > + int ret;
> > +
> > + DBGPRINT("<----- SEND CMD: ");
> > + PRINT_PACKET(buf, len);
>
> Why does PRINT_PACKET not also takes the initial message string as
> input. Make the macro clean and self contained.
>
> > +
> > + ret = write(dev, buf, len);
> > + if (ret < 0)
> > + return -errno;
> > +
> > + if (ret != len)
> > + return -1;
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * Read the event from the controller
> > + */
> > +static int intel_read_evt(int dev, unsigned char *buf, int len)
> > +{
> > + int ret;
> > +
> > + ret = read_hci_event(dev, buf, len);
> > + if (ret < 0)
> > + return -1;
> > +
> > + DBGPRINT("-----> READ EVT: ");
> > + PRINT_PACKET(buf, ret);
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * Validate HCI events
> > + */
> > +static int validate_events(struct _p_ent *e_ent, struct _p_ent *p_ent)
> > +{
> > + if (e_ent == NULL || p_ent == NULL) {
> > + DBGPRINT("DBG: invalid patch entry parameters\n");
>
> If you keep using DBG: in front of the debug messages, then it should be
> part of the macro. Same as the \n actually.
>
> > + return -1;
> > + }
> > +
> > + if (e_ent->len != p_ent->len) {
> > + DBGPRINT("DBG: lengths are mismatched:[%d|%d]\n",
> > + e_ent->len, p_ent->len);
> > + return -1;
> > + }
> > +
> > + if (memcmp(e_ent->data, p_ent->data, e_ent->len)) {
> > + DBGPRINT("DBG: data is mismatched\n");
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * Read the next patch entry one line at a time
> > + */
> > +static int get_next_p_ent(int fd, struct _p_ent *p_ent)
> > +{
>
> Make this get_next_patch_ent or get_next_patch_entry. This _p shortcut
> is really a bad idea.
>
> > + int len;
> > + char rb;
> > +
> > + if (read(fd, &rb, 1) <= 0)
> > + return 0;
> > +
> > + p_ent->type = rb;
> > + len = 0;
> > +
> > + switch (p_ent->type) {
> > + case PATCH_TYPE_CMD:
> > + p_ent->data[len++] = HCI_COMMAND_PKT;
> > + len += read(fd, &p_ent->data[len], 3);
>
> You need error handling here. What happens if the read fails?
>
> > + len += read(fd, &p_ent->data[len], (int)p_ent->data[3]);
> > + p_ent->len = len;
> > + break;
> > + case PATCH_TYPE_EVT:
> > + p_ent->data[len++] = HCI_EVENT_PKT;
> > + len += read(fd, &p_ent->data[len], 2);
>
> And same here.
>
> > + len += read(fd, &p_ent->data[len], (int)p_ent->data[2]);
> > + p_ent->len = len;
> > + break;
> > + default:
> > + fprintf(stderr, "invalid patch entry(%d)\n", p_ent->type);
> > + return -1;
> > + }
> > +
> > + return len;
> > +}
> > +
> > +/**
> > + * Download the patch set to the controller and verify the event
> > + */
> > +static int intel_download_patch(struct _p_ctx *p_ctx)
> > +{
> > + int ret;
> > + struct _p_ent p_ent;
> > + struct _p_ent e_ent;
>
> The more and more I go through the code, this becomes less readable.
> Calling the variables ctx and entry/ent would be just fine.
>
> Also you do know that "struct patch_entry patch_entry" is a perfectly
> fine variable declaration.
>
> > +
> > + DBGPRINT("DBG: start patch downloading\n");
> > +
> > + do {
> > + ret = get_next_p_ent(p_ctx->fd, &p_ent);
> > + if (ret <= 0) {
> > + p_ctx->patch_error = 1;
> > + break;
> > + }
> > +
> > + if (p_ent.type == PATCH_TYPE_CMD) {
>
> Why not use a switch statement here?
>
> > + ret = intel_write_cmd(p_ctx->dev,
> > + p_ent.data,
> > + p_ent.len);
> > + if (ret <= 0) {
> > + fprintf(stderr,
> > + "failed to send cmd(%d)\n", ret);
> > + break;
> > + }
> > + } else if (p_ent.type == PATCH_TYPE_EVT) {
> > + ret = intel_read_evt(p_ctx->dev,
> > + e_ent.data,
> > + sizeof(e_ent.data));
> > + if (ret <= 0) {
> > + fprintf(stderr,
> > + "failed to read evt(%d)\n", ret);
> > + break;
> > + }
> > + e_ent.len = ret;
> > +
> > + if (validate_events(&e_ent, &p_ent) < 0) {
> > + DBGPRINT("DBG: events are mismatched\n");
> > + p_ctx->patch_error = 1;
> > + ret = -1;
> > + break;
> > + }
> > + } else {
> > + fprintf(stderr, "unknown patch type(%d)\n",
> > + p_ent.type);
> > + ret = -1;
> > + break;
> > + }
> > + } while (1);
> > +
> > + return ret;
> > +}
> > +
> > +static int open_patch_file(struct _p_ctx *p_ctx, char *fw_ver)
> > +{
> > + char patch_file[PATH_MAX] = {0};
>
> The variable initialization here is useless. So don't bother with it.
>
> > +
> > + snprintf(patch_file, PATH_MAX, "%s%s"PATCH_SEQ_EXT,
> > + PATCH_FILE_PATH, fw_ver);
>
> Please use %s%s%s here. And not cat the string together.
>
> > + DBGPRINT("DBG: PATCH_FILE: %s\n", patch_file);
> > +
> > + p_ctx->fd = open(patch_file, O_RDONLY);
> > + if (p_ctx->fd < 0) {
> > + DBGPRINT("DBG: cannot open patch file. go to post patch\n");
> > + return -1;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * Prepare the controller for patching.
> > + */
> > +static int pre_patch(struct _p_ctx *p_ctx)
> > +{
> > + int ret, i;
> > + struct _p_ent p_ent;
> > + char fw_ver[INTEL_VER_PARAM_LEN * 2];
> > +
> > + DBGPRINT("DBG: start pre_patch\n");
> > +
> > + p_ent.data[0] = HCI_COMMAND_PKT;
> > + p_ent.data[1] = 0x11;
> > + p_ent.data[2] = 0xFC;
> > + p_ent.data[3] = 0x02;
> > + p_ent.data[4] = 0x01;
> > + p_ent.data[5] = 0x00;
> > + p_ent.len = HCI_TYPE_LEN + HCI_COMMAND_HDR_SIZE + INTEL_MFG_PARAM_LEN;
> > +
> > + ret = intel_write_cmd(p_ctx->dev, p_ent.data, p_ent.len);
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to send cmd(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = intel_read_evt(p_ctx->dev, p_ent.data, sizeof(p_ent.data));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to read evt(%d)\n", ret);
> > + return ret;
> > + }
> > + p_ent.len = ret;
> > +
> > + if (p_ent.data[6] != 0x00) {
> > + DBGPRINT("DBG: command failed. status=%02x\n", p_ent.data[6]);
> > + p_ctx->patch_error = 1;
> > + return -1;
> > + }
> > +
> > + p_ent.data[0] = HCI_COMMAND_PKT;
> > + p_ent.data[1] = 0x05;
> > + p_ent.data[2] = 0xFC;
> > + p_ent.data[3] = 0x00;
> > + p_ent.len = HCI_TYPE_LEN + HCI_COMMAND_HDR_SIZE;
> > +
> > + ret = intel_write_cmd(p_ctx->dev, p_ent.data, p_ent.len);
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to send cmd(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = intel_read_evt(p_ctx->dev, p_ent.data, sizeof(p_ent.data));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to read evt(%d)\n", ret);
> > + return ret;
> > + }
> > + p_ent.len = ret;
> > +
> > + if (p_ent.data[6] != 0x00) {
> > + DBGPRINT("DBG: command failed. status=%02x\n", p_ent.data[6]);
> > + p_ctx->patch_error = 1;
> > + return -1;
> > + }
> > +
> > + for (i = 0; i < INTEL_VER_PARAM_LEN; i++)
> > + sprintf(&fw_ver[i*2], "%02x", p_ent.data[7+i]);
> > +
> > + if (open_patch_file(p_ctx, fw_ver) < 0) {
> > + p_ctx->patch_error = 1;
> > + return -1;
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * check the event is startup event
> > + */
> > +static int is_startup_evt(unsigned char *buf)
> > +{
> > + if (buf[1] == 0xFF && buf[2] == 0x01 && buf[3] == 0x00)
> > + return 1;
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * Finalize the patch process and reset the controller
> > + */
> > +static int post_patch(struct _p_ctx *p_ctx)
> > +{
> > + int ret;
> > + struct _p_ent p_ent;
> > +
> > + DBGPRINT("DBG: start post_patch\n");
> > +
> > + p_ent.data[0] = HCI_COMMAND_PKT;
> > + p_ent.data[1] = 0x11;
> > + p_ent.data[2] = 0xFC;
> > + p_ent.data[3] = 0x02;
> > + p_ent.data[4] = 0x00;
> > + if (p_ctx->reset_enable_patch)
> > + p_ent.data[5] = 0x02;
> > + else
> > + p_ent.data[5] = 0x01;
> > +
> > + p_ent.len = HCI_TYPE_LEN + HCI_COMMAND_HDR_SIZE + INTEL_MFG_PARAM_LEN;
> > +
> > + ret = intel_write_cmd(p_ctx->dev, p_ent.data, p_ent.len);
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to send cmd(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = intel_read_evt(p_ctx->dev, p_ent.data, sizeof(p_ent.data));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to read evt(%d)\n", ret);
> > + return ret;
> > + }
> > + p_ent.len = ret;
> > + if (p_ent.data[6] != 0x00) {
> > + fprintf(stderr, "cmd failed. st=%02x\n", p_ent.data[6]);
> > + return -1;
> > + }
> > +
> > + do {
> > + ret = intel_read_evt(p_ctx->dev, p_ent.data,
> > + sizeof(p_ent.data));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to read cmd(%d)\n", ret);
> > + return ret;
> > + }
> > + p_ent.len = ret;
> > + } while (!is_startup_evt(p_ent.data));
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * Main routine that handles the device patching process.
> > + */
> > +static int intel_patch_device(struct _p_ctx *p_ctx)
> > +{
> > + int ret;
> > +
> > + ret = pre_patch(p_ctx);
> > + if (ret < 0) {
> > + if (!p_ctx->patch_error) {
> > + fprintf(stderr, "I/O error: pre_patch failed\n");
> > + return ret;
> > + }
> > +
> > + DBGPRINT("DBG: patch failed. proceed to post patch\n");
> > + goto post_patch;
> > + }
> > +
> > + ret = intel_download_patch(p_ctx);
> > + if (ret < 0) {
> > + if (!p_ctx->patch_error) {
> > + fprintf(stderr, "I/O error: download_patch failed\n");
> > + close(p_ctx->fd);
> > + return ret;
> > + }
> > + } else {
> > + DBGPRINT("DBG: patch done\n");
> > + p_ctx->reset_enable_patch = 1;
> > + }
> > +
> > + close(p_ctx->fd);
> > +
> > +post_patch:
> > + ret = post_patch(p_ctx);
> > + if (ret < 0) {
> > + fprintf(stderr, "post_patch failed(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int set_rts(int dev, int rtsval)
> > +{
> > + int arg;
> > +
> > + if (ioctl(dev, TIOCMGET, &arg) < 0) {
> > + perror("cannot get TIOCMGET");
> > + return -errno;
> > + }
> > + if (rtsval)
> > + arg |= TIOCM_RTS;
> > + else
> > + arg &= ~TIOCM_RTS;
> > +
> > + if (ioctl(dev, TIOCMSET, &arg) == -1) {
> > + perror("cannot set TIOCMGET");
> > + return -errno;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static unsigned char get_intel_speed(int speed)
> > +{
> > + switch (speed) {
> > + case 9600:
> > + return 0x00;
> > + case 19200:
> > + return 0x01;
> > + case 38400:
> > + return 0x02;
> > + case 57600:
> > + return 0x03;
> > + case 115200:
> > + return 0x04;
> > + case 230400:
> > + return 0x05;
> > + case 460800:
> > + return 0x06;
> > + case 921600:
> > + return 0x07;
> > + case 1843200:
> > + return 0x08;
> > + case 3250000:
> > + return 0x09;
> > + case 2000000:
> > + return 0x0A;
> > + case 3000000:
> > + return 0x0B;
> > + default:
> > + return 0xFF;
> > + }
> > +}
> > +
> > +/**
> > + * if it failed to change to new baudrate, it will rollback
> > + * to initial baudrate
> > + */
> > +static int change_baudrate(int dev, int init_speed, int *speed,
> > + struct termios *ti)
> > +{
> > + int ret;
> > + unsigned char br;
> > + unsigned char cmd[5];
> > + unsigned char evt[7];
> > +
> > + DBGPRINT("DBG: start baudrate change\n");
> > +
> > + ret = set_rts(dev, 0);
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to clear RTS\n");
> > + return ret;
> > + }
> > +
> > + cmd[0] = HCI_COMMAND_PKT;
> > + cmd[1] = 0x06;
> > + cmd[2] = 0xFC;
> > + cmd[3] = 0x01;
> > +
> > + br = get_intel_speed(*speed);
> > + if (br == 0xFF) {
> > + fprintf(stderr, "speed %d is not supported\n", *speed);
> > + return -1;
> > + }
> > + cmd[4] = br;
> > +
> > + ret = intel_write_cmd(dev, cmd, sizeof(cmd));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to send cmd(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + /*
> > + * wait for buffer to be consumed by the controller
> > + */
> > + usleep(300000);
> > +
> > + if (set_speed(dev, ti, *speed) < 0) {
> > + fprintf(stderr, "can't set to new baud rate\n");
> > + return -1;
> > + }
> > +
> > + ret = set_rts(dev, 1);
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to set RTS\n");
> > + return ret;
> > + }
> > +
> > + ret = intel_read_evt(dev, evt, sizeof(evt));
> > + if (ret < 0) {
> > + fprintf(stderr, "failed to read evt(%d)\n", ret);
> > + return ret;
> > + }
> > +
> > + if (evt[4] != 0x00) {
> > + fprintf(stderr,
> > + "failed to change speed. use default speed %d\n",
> > + init_speed);
> > + *speed = init_speed;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * An entry point for Intel specific initialization
> > + */
> > +int intel_init(int dev, int init_speed, int *speed, struct termios *ti)
> > +{
> > + int ret = 0;
> > + struct _p_ctx *p_ctx;
> > +
> > + if (change_baudrate(dev, init_speed, speed, ti) < 0)
> > + return -1;
> > +
> > + /*
> > + * initialize the patch context
> > + */
> > + p_ctx = malloc(sizeof(struct _p_ctx));
> > + if (!p_ctx) {
> > + fprintf(stderr, "failed to allocate the patch context");
> > + return -ENOMEM;
> > + }
> > + memset(p_ctx, 0, sizeof(struct _p_ctx));
>
> What is this malloc for. You could just put it on the stack.
>
> > +
> > + p_ctx->dev = dev;
> > +
> > + ret = intel_patch_device(p_ctx);
> > + if (ret < 0)
> > + fprintf(stderr, "failed to initialize the device");
> > +
> > + free(p_ctx);
> > + return ret;
> > +}
>
> Regards
>
> Marcel
--
Regards
Tedd Ho-Jeong An
Intel Corporation
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
