Hello,
isn't there anyone who can help me? It's really important for me.
It already would be helpful, if someone can tell me *how i can change my
security level*.
To the last mail (below here):
After overwriting with a sdp- and profiles-file from a backup, the line
in trusts don't get deleted anymore.
Regards & have a good weekend,
Steffen
Am 24.04.2012 22:57, schrieb Steffen Becker:
Some additional information:
On both PCs I opened the file:
/var/lib/bluetooth/<local-bdaddr>/trusts
and wrote this line in it:
<remote-bdaddr> [all]
saved the file and tried again to connect via pand. Connection again
didn't worked but after that, the entered line in the trusts-file was
deleted!
Maybe this helps you to help me? :-)
Regards,
Steffen
Am 24.04.2012 13:35, schrieb Steffen Becker:
Hello,
I still have a problem to connect my bluetooth devices via pand
command. I've been searching the internet and asked in forums, but i
didn't get an answer.
I have 2 gentoo-PCs with a Bluetooth-3.0 Dongle at each PC.
Circa 2 weeks ago, everything worked. BlueZ-4.96 was installed and I
had no problems to connect my devices via pand and via rfcomm command.
But then I asked you for an SSP debug mode patch, because I wanted to
sniff my rfcomm connection. At the same time BlueZ-4.99 was released
and so I installed the new BlueZ-version and the patch.
I also deleted the stored linkkey and I was happy that I was able to
sniff my rfcomm-connection.
But thenceforth I can't connect my devices via pand command.
Then I tried to install the BlueZ-4.99 *without* the patch, but I
still couldn't connect via pand.
I also tried to install BlueZ-4.96, but the problem was still the
same. So I think it's no problem of the patch or the newer
BlueZ-version, but I really have no idea what's wrong.
If you need any of my configuration-files, just tell me and I will
send it.
In the end, I show the hcidump message when I try to connect via pand
command.
Hope anyone can help me.
Regards,
Steffen
# hcidump -i hci0
HCI sniffer - Bluetooth packet analyzer ver 2.3
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:02:72:AE:58:73 class 0x420100 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:02:72:AE:58:73 role 0x00
Role: Master
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Role Change (0x12) plen 8
status 0x00 bdaddr 00:02:72:AE:58:73 role 0x00
Role: Master
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 11 bdaddr 00:02:72:AE:58:73 type ACL encrypt 0x00
< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11
> HCI Event: Max Slots Change (0x1b) plen 3
handle 11 slots 5
> HCI Event: Command Status (0x0f) plen 4
Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1
> HCI Event: Read Remote Supported Features (0x0b) plen 11
status 0x00 handle 11
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x87
< HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3
handle 11 page 1
> HCI Event: Command Status (0x0f) plen 4
Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1
> HCI Event: Read Remote Extended Features (0x23) plen 13
status 0x00 handle 11 page 1 max 1
Features: 0x01 0x00 0x00 0x00 0x00 0x00 0x00 0x00
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:02:72:AE:58:73 mode 2 clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:02:72:AE:58:73 name 'bluetooth1-0'
> HCI Event: IO Capability Response (0x32) plen 9
bdaddr 00:02:72:AE:58:73 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: IO Capability Request (0x31) plen 6
bdaddr 00:02:72:AE:58:73
< HCI Command: IO Capability Request Reply (0x01|0x002b) plen 9
bdaddr 00:02:72:AE:58:73 capability 0x03 oob 0x00 auth 0x00
Capability: NoInputNoOutput (OOB data not present)
Authentication: No Bonding (No MITM Protection)
> HCI Event: Command Complete (0x0e) plen 10
IO Capability Request Reply (0x01|0x002b) ncmd 1
status 0x00 bdaddr 00:02:72:AE:58:73
> HCI Event: User Confirmation Request (0x33) plen 10
bdaddr 00:02:72:AE:58:73 passkey 800553
< HCI Command: User Confirmation Request Reply (0x01|0x002c) plen 6
bdaddr 00:02:72:AE:58:73
> HCI Event: Command Complete (0x0e) plen 10
User Confirmation Request Reply (0x01|0x002c) ncmd 1
status 0x00 bdaddr 00:02:72:AE:58:73
> HCI Event: Simple Pairing Complete (0x36) plen 7
status 0x00 bdaddr 00:02:72:AE:58:73
> HCI Event: Link Key Notification (0x18) plen 23
bdaddr 00:02:72:AE:58:73 key E1C30FE5E1D620AC6DC78BB5A4AC299A type 4
Type: Unauthenticated Combination Key
> HCI Event: Encrypt Change (0x08) plen 4
status 0x00 handle 11 encrypt 0x01
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
> ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 3
< ACL data: handle 11 flags 0x00 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000002
L2CAP Signalling Channel
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 15 scid 0x0040
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x00b8
Enhanced Retransmission mode
Streaming mode
FCS Option
Fixed Channels
< ACL data: handle 11 flags 0x00 dlen 10
L2CAP(s): Info req: type 3
> ACL data: handle 11 flags 0x02 dlen 20
L2CAP(s): Info rsp: type 3 result 0
Fixed channel list 0x00000002
L2CAP Signalling Channel
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 2
Connection pending - Authorization pending
< ACL data: handle 11 flags 0x00 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 3 status 0
Connection refused - security block
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 2
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 11 packets 1
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 11 reason 0x13
Reason: Remote User Terminated Connection
--
To unsubscribe from this list: send the line "unsubscribe
linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe
linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
