From: Andrei Emeltchenko <andrei.emeltchenko@xxxxxxxxx> RFC for Software / Virtual _DRAFT_ implementation of Bluetooth High Speed by using wireless driver. Currently it can be used for testing Bluetooth A2MP protocol. Please comment is this right way of implementing things like: using virtual interface to enable AMP. Shall I use module instead? Shall I put files to mac80211 or use other location? Is name "vamp" OK? Other variants are: softamp, soft_amp, soft_amp80211, etc. Main ideas: - Use existing wireless infrastructure nl80211, mac80211. - Use virtual interface of type NL80211_IFTYPE_VIRTUAL_AMP80211. Then all drivers supporting virtual interface should work. After modifying iw it will be enabled by adding new virtual interface. # iw phy <physical device> interface add vamp type vamp # iw dev phy#0 Interface vamp ifindex 6 type Virtual AMP ... # hciconfig hci1: Type: AMP Bus: VIRTUAL BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 DOWN RX bytes:0 acl:0 sco:0 events:0 errors:0 TX bytes:0 acl:0 sco:0 commands:0 errors:0 ... Andrei Emeltchenko (1): mac80211: Adds Software / Virtual AMP 80211 drivers/net/wireless/mac80211_hwsim.c | 3 +- include/linux/nl80211.h | 1 + net/mac80211/Kconfig | 8 ++ net/mac80211/Makefile | 2 + net/mac80211/ieee80211_i.h | 4 + net/mac80211/iface.c | 25 ++++ net/mac80211/util.c | 1 + net/mac80211/virtual_amp.c | 205 +++++++++++++++++++++++++++++++++ net/mac80211/virtual_amp.h | 29 +++++ 9 files changed, 277 insertions(+), 1 deletions(-) create mode 100644 net/mac80211/virtual_amp.c create mode 100644 net/mac80211/virtual_amp.h -- 1.7.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
