---
doc/heartrate-api.txt | 72 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 72 insertions(+)
create mode 100644 doc/heartrate-api.txt
diff --git a/doc/heartrate-api.txt b/doc/heartrate-api.txt
new file mode 100644
index 0000000..5dcaa52
--- /dev/null
+++ b/doc/heartrate-api.txt
@@ -0,0 +1,72 @@
+BlueZ D-Bus Heart Rate API description
+****************************************
+
+ Santiago Carot-Nemesio <sancane@xxxxxxxxx>
+
+Heart Rate Profile hierarchy
+============================
+
+Service org.bluez
+Interface org.bluez.HeartRate
+Object path [variable prefix]/{hci0,hci1,...}/dev_XX_XX_XX_XX_XX_XX
+
+Methods dict GetProperties()
+
+ Returns all properties for the interface. See the
+ Properties section for the available properties.
+
+ RegisterWatcher(object agent)
+
+ Registers a watcher to monitor heart rate measurements.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+
+ UnregisterWatcher(object agent)
+
+ Unregisters a watcher.
+
+ Possible Errors: org.bluez.Error.InvalidArguments
+ org.bluez.Error.NotFound
+
+ Reset()
+
+ Restart the accumulation of energy expended from zero.
+
+ Possible Errors: org.bluez.Error.NotSupported
+
+Properties boolean ResetSupported [readonly]
+
+ True if energy expended is supported.
+
+Heart Rate Watcher hierarchy
+============================
+Service unique name
+Interface org.bluez.HeartRateWatcher
+Object path freely definable
+
+Methods void MeasurementReceived(dict measure)
+
+ This callback is called whenever a heart rate measurement
+ is received from the heart rate device. The unit for the
+ Value is expressed in beats per minute (bpm). The energy
+ field is optional and represents the accumulated energy
+ expended in kilo Joules since last time it was reset.
+ Furthermore, the device will be automatically reset when
+ it is needed.
+ The Contact field, if present, indicates that the device
+ supports contact sensor, besides it will be true if skin
+ contact is detected. The optional interval field is an
+ array containing RR-Interval values which represent the
+ time between two R-Wave detections, where the RR-Interval
+ Value 0 is older than the Value 1 and so on.
+
+ Dict is defined as below:
+ {
+ "Value" : uint16,
+ "Energy" : uint16,
+ "Contact" : boolean,
+ "Location" : ("Other", "Chest", "Wrist","Finger",
+ "Hand", "Ear Lobe", "Foot"),
+ "Interval" : array{uint16}
+ }
+
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
