Hi Andrei,
> > > > On Fri, Nov 18, 2011, Michael Schmitt wrote:
> > > > > < HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> > > > > > HCI Event: Command Complete (0x0e) plen 12
> > > > > Read Local Version Information (0x04|0x0001) ncmd 1
> > > > > status 0x00
> > > > > HCI Version: 1.2 (0x2) HCI Revision: 0x2006
> > > > > LMP Version: 1.2 (0x2) LMP Subversion: 0x1806
> > > > > Manufacturer: AVM Berlin (31)
> > > >
> > > > Ok, so this is a 1.2 adapter.
> > > >
> > > > > < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0
> > > > > > HCI Event: Command Status (0x0f) plen 4
> > > > > Read Local Supported Commands (0x04|0x0002) status 0x01 ncmd 1
> > > > > Error: Unknown HCI Command
> > > >
> > > > This is the reason why you're getting a timeout. Since the adapter
> > > > claims to support Bluetooth version 1.2 it should also support this HCI
> > > > command, so from that perspective it's not conforming to the
> > >
> > > Apparently we check for "Bluetooth Core Specification 1.1"
> > >
> > > Shall we change to:
> > >
> > > diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> > > index f0fbb02..ed55b33 100644
> > > --- a/net/bluetooth/hci_event.c
> > > +++ b/net/bluetooth/hci_event.c
> > > @@ -562,7 +562,7 @@ static void hci_setup(struct hci_dev *hdev)
> > > {
> > > hci_setup_event_mask(hdev);
> > >
> > > - if (hdev->lmp_ver > 1)
> > > + if (hdev->lmp_ver > 2)
> > > hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
> >
> > 0x00 is 1.0b and 0x01 is 1.1. So you are changing the check from 1.2 to
> > 2.0. The command was introduced with 1.2 actually.
>
> Can we define in bluetooth.h something like:
>
> #define BLUETOOTH_LMP_VER_1.1 1
> #define BLUETOOTH_LMP_VER_1.2 2
yes, but just leave LMP out of it. Just do BLUETOOTH_VER_1_1 or similar.
Even the . in the define will not work out.
> > The only real change that needs to be done here is to check hci_ver
> > instead of lmp_ver. This command is a HCI feature and not a LMP feature
> > actually.
>
> Maybe same define for HCI_VER ?
They are identical. So one is enough. They just have a different
meaning. The LMP is air protocol version and HCI is host controller
version. In most cases they are the same, but not have to be.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
