Hi Costa,
> 1 Use USB_DEVICE_AND_INTERFACE_INFO to do device matching with PID/VID 0x3006/0x0cf3.
> 2 Delete desc.bInterfaceNumber != 0 check.
> 3 Add function ath3k_download_3006 to download firmware to hardware for 0x3006
>
> Signed-off-by: Costa Yao <cqyao@xxxxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/ath3k.c | 65 ++++++++++++++++++++++++++++++++++++++++++---
> 1 files changed, 61 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 1622772..b38cd16 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -40,6 +40,7 @@
>
> #define ATH3K_MODE_MASK 0x3F
> #define ATH3K_NORMAL_MODE 0x0E
> +#define ATH3K_PREBOOT_MODE 0x0D
>
> #define ATH3K_PATCH_UPDATE 0x80
> #define ATH3K_SYSCFG_UPDATE 0x40
> @@ -49,6 +50,9 @@
> #define ATH3K_XTAL_FREQ_19P2 0x02
> #define ATH3K_NAME_LEN 0xFF
>
> +#define BTUSB_ATH3012 0x80
> +#define BTUSB_ATH3006 0x0100
> +
this is ath3k.c specific. So do not use BTUSB_ prefux.
> struct ath3k_version {
> unsigned int rom_version;
> unsigned int build_version;
> @@ -71,6 +75,7 @@ static struct usb_device_id ath3k_table[] = {
>
> /* Atheros AR3012 with sflash firmware*/
> { USB_DEVICE(0x0CF3, 0x3004) },
> + { USB_DEVICE_AND_INTERFACE_INFO(0x0CF3, 0x3006, 0xe0, 0x01, 0x01) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> { USB_DEVICE(0x0489, 0xE02C) },
> @@ -80,13 +85,13 @@ static struct usb_device_id ath3k_table[] = {
>
> MODULE_DEVICE_TABLE(usb, ath3k_table);
>
> -#define BTUSB_ATH3012 0x80
> /* This table is to load patch and sysconfig files
> * for AR3012 */
> static struct usb_device_id ath3k_blist_tbl[] = {
>
> /* Atheros AR3012 with sflash firmware*/
> { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0CF3, 0x3006), .driver_info = BTUSB_ATH3006 },
>
> { } /* Terminating entry */
> };
> @@ -355,6 +360,52 @@ static int ath3k_load_syscfg(struct usb_device *udev)
> return ret;
> }
>
> +static int ath3k_download_3006(struct usb_device *udev)
> +{
> + int ret;
> + unsigned char fw_state;
> +
> + if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001) {
> + BT_ERR("ath3k_probe: udev->descriptor.bcdDevice");
> + return -ENODEV;
> + }
> +
> + ret = ath3k_get_state(udev, &fw_state);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: ath3k_get_state err");
> + return ret;
> + }
> +
> + if ((fw_state & ATH3K_MODE_MASK) == ATH3K_PREBOOT_MODE) {
> + BT_ERR("ath3k_probe: firmware are in preboot mode now");
> + BT_ERR("ath3k_probe: try to switch to Normal Mode");
> + ret = ath3k_set_normal_mode(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: set normal mode failed");
> + return ret;
> + }
> + }
> +
> + /* Note we should wait for a while */
> + mdelay(100);
> + ret = ath3k_load_patch(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: Load patch file failed");
> + return ret;
> + }
> + ret = ath3k_load_syscfg(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: Load sysconfig file failed");
> + return ret;
> + }
> + ret = ath3k_switch_pid(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: switch pid failed");
> + return ret;
> + }
> + return 0;
> +}
> +
> static int ath3k_probe(struct usb_interface *intf,
> const struct usb_device_id *id)
> {
> @@ -364,9 +415,6 @@ static int ath3k_probe(struct usb_interface *intf,
>
> BT_DBG("intf %p id %p", intf, id);
>
> - if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
> - return -ENODEV;
> -
> /* match device ID in ath3k blacklist table */
> if (!id->driver_info) {
> const struct usb_device_id *match;
> @@ -401,6 +449,15 @@ static int ath3k_probe(struct usb_interface *intf,
> return 0;
> }
>
> + if (id->driver_info & BTUSB_ATH3006) {
> + ret = ath3k_download_3006(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: download_3006 failed");
> + return ret;
> + }
> + return 0;
> + }
> +
> ret = request_firmware(&firmware, ATH3K_FIRMWARE, &udev->dev);
> if (ret < 0) {
> if (ret == -ENOENT)
The rest is fine with me.
Regards
Marcel
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
