Hi Costa,
* Yao, Costa <cqyao@xxxxxxxxxxxxxxxx> [2011-11-08 07:36:11 +0000]:
> AR3006 is a composite device, and interface 0 is used for hid function, not for bluetooth function.
> We should make the following changes:
> 1 Blacklist AR3006 PID/VID in ath3k_table
> 2 Add ath3k_composite_device_table in ath3k.c to register composite device.
> 3 Load patch and sysconfig files for AR3006
>
> Signed-off-by: Costa Yao <cqyao@xxxxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/ath3k.c | 64 ++++++++++++++++++++++++++++++++++++++++++--
> 1 files changed, 61 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index 1622772..a9d6678 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -40,6 +40,7 @@
>
> #define ATH3K_MODE_MASK 0x3F
> #define ATH3K_NORMAL_MODE 0x0E
> +#define ATH3K_PREBOOT_MODE 0x0D
>
> #define ATH3K_PATCH_UPDATE 0x80
> #define ATH3K_SYSCFG_UPDATE 0x40
> @@ -71,6 +72,7 @@ static struct usb_device_id ath3k_table[] = {
>
> /* Atheros AR3012 with sflash firmware*/
> { USB_DEVICE(0x0CF3, 0x3004) },
> + { USB_DEVICE(0x0CF3, 0x3006) },
>
> /* Atheros AR5BBU12 with sflash firmware */
> { USB_DEVICE(0x0489, 0xE02C) },
> @@ -81,16 +83,26 @@ static struct usb_device_id ath3k_table[] = {
> MODULE_DEVICE_TABLE(usb, ath3k_table);
>
> #define BTUSB_ATH3012 0x80
> +#define BTUSB_ATH3006 0x0100
> /* This table is to load patch and sysconfig files
> * for AR3012 */
> static struct usb_device_id ath3k_blist_tbl[] = {
>
> /* Atheros AR3012 with sflash firmware*/
> { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
> + { USB_DEVICE(0x0cf3, 0x3006), .driver_info = BTUSB_ATH3006 },
>
> { } /* Terminating entry */
> };
>
> +/* Atheros composite devices table
> + */
> +static struct usb_device_id ath3k_composite_device_table[] = {
> +
> + { USB_DEVICE(0x0cf3, 0x3006) },
> +
> + { } /* Terminating entry */
> +};
> #define USB_REQ_DFU_DNLOAD 1
> #define BULK_SIZE 4096
> #define FW_HDR_SIZE 20
> @@ -361,11 +373,19 @@ static int ath3k_probe(struct usb_interface *intf,
> const struct firmware *firmware;
> struct usb_device *udev = interface_to_usbdev(intf);
> int ret;
> + unsigned char fw_state;
> + const struct usb_device_id *match_comp_dev;
>
> BT_DBG("intf %p id %p", intf, id);
> -
> - if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
> - return -ENODEV;
> + /* For composite device */
> + match_comp_dev = usb_match_id(intf, ath3k_composite_device_table);
> + if (match_comp_dev) {
> + if (intf->cur_altsetting->desc.bInterfaceNumber != 2)
> + return -ENODEV;
> + } else {
> + if (intf->cur_altsetting->desc.bInterfaceNumber != 0)
> + return -ENODEV;
> + }
>
> /* match device ID in ath3k blacklist table */
> if (!id->driver_info) {
> @@ -399,6 +419,44 @@ static int ath3k_probe(struct usb_interface *intf,
> }
> ath3k_switch_pid(udev);
> return 0;
> + } else if (id->driver_info & BTUSB_ATH3006) {
> +
> + if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001) {
> + BT_ERR("ath3k_probe: udev->descriptor.bcdDevice");
> + return -ENODEV;
> + }
> + ret = ath3k_get_state(udev, &fw_state);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: ath3k_get_state err");
> + return ret;
> + }
> + if ((fw_state & ATH3K_MODE_MASK) == ATH3K_PREBOOT_MODE) {
> + BT_ERR("ath3k_probe: firmware are in preboot mode now");
> + BT_ERR("ath3k_probe: try to switch to Normal Mode");
> + ret = ath3k_set_normal_mode(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: set normal mode failed");
> + return ret;
> + }
> + }
> + /*Note we should wait for a while*/
> + mdelay(100);
> + ret = ath3k_load_patch(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: Load patch file failed");
> + return ret;
> + }
> + ret = ath3k_load_syscfg(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: Load sysconfig file failed");
> + return ret;
> + }
> + ret = ath3k_switch_pid(udev);
> + if (ret < 0) {
> + BT_ERR("ath3k_probe: switch pid failed");
> + return ret;
> + }
> + return 0;
You are duplicating some code here, care to merge the common parts between
this and the handling of BTUSB_ATH3012?
Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
