* Anderson Lizardo <anderson.lizardo@xxxxxxxxxxxxx> [2011-07-27 18:40:09 -0300]: > The new connection parameters now match the recommended values for > Proximity and Health Thermometer profiles. The previous values were > ramdomly chosen, and are either too low or too high for most cases. > > New values: > > Scan Interval: 60 ms > Scan Window: 30 ms > Minimum Connection Interval: 50 ms > Maximum Connection Interval: 70 ms > Supervision Timeout: 420 ms > > See "Table 5.2: Recommended Scan Interval and Scan Window Values" and > "Table 5.3: Recommended Connection Interval Values" for both profiles > for details. Note that the "fast connection" parameters were chosen, > because we do not support yet dynamically changing these parameters from > initiator side. > > Additionally, the Proximity profile recommends (section "4.4 Alert on > Link Loss"): > > "It is recommended that the Link Supervision Timeout (LSTO) is set to 6x > the connection interval." > > Minimum_CE_Length and Maximum_CE_Length were also changed from 0x0001 to > 0x0000 because they are informational and optional, and old value was > not reflecting reality. > --- > net/bluetooth/hci_conn.c | 14 +++++++------- > 1 files changed, 7 insertions(+), 7 deletions(-) Applied, and also added the Signed-off-by line that you forgot. Thanks. Gustavo -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
