* Gustavo F. Padovan <padovan@xxxxxxxxxxxxxx> [2011-06-30 18:11:49 -0300]:
> * Li, Steven <yongli@xxxxxxxxxxxxxxxx> [2011-06-29 07:14:47 +0000]:
>
> >
> > The new Ath3k needs to download patch and radio table,
> > and it keeps same PID/VID even after downloading the patch and radio
> > table. This patch is to use the bcdDevice (Device Release Number) to
> > judge whether the chip has been patched or not. The init bcdDevice
> > value of the chip is 0x0001, this value increases after patch and
> > radio table downloading.
> >
> > Signed-off-by: Steven.Li <yongli@xxxxxxxxxxxxxxxx>
> > ---
> > drivers/bluetooth/ath3k.c | 5 +++++
> > drivers/bluetooth/btusb.c | 12 +++++++++++-
> > 2 files changed, 16 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> > index 6bacef3..a585473 100644
> > --- a/drivers/bluetooth/ath3k.c
> > +++ b/drivers/bluetooth/ath3k.c
> > @@ -375,6 +375,11 @@ static int ath3k_probe(struct usb_interface *intf,
> >
> > /* load patch and sysconfig files for AR3012 */
> > if (id->driver_info & BTUSB_ATH3012) {
> > +
> > + /* New firmware with patch and sysconfig files already loaded */
> > + if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
> > + return -ENODEV;
> > +
> > ret = ath3k_load_patch(udev);
> > if (ret < 0) {
> > BT_ERR("Loading patch file failed");
> > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> > index c2de895..91d13a9 100644
> > --- a/drivers/bluetooth/btusb.c
> > +++ b/drivers/bluetooth/btusb.c
> > @@ -54,6 +54,7 @@ static struct usb_driver btusb_driver;
> > #define BTUSB_BCM92035 0x10
> > #define BTUSB_BROKEN_ISOC 0x20
> > #define BTUSB_WRONG_SCO_MTU 0x40
> > +#define BTUSB_ATH3012 0x80
> >
> > static struct usb_device_id btusb_table[] = {
> > /* Generic Bluetooth USB device */
> > @@ -110,7 +111,7 @@ static struct usb_device_id blacklist_table[] = {
> > { USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },
> >
> > /* Atheros 3012 with sflash firmware */
> > - { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_IGNORE },
> > + { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
> >
> > /* Atheros AR5BBU12 with sflash firmware */
> > { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
> > @@ -914,6 +915,15 @@ static int btusb_probe(struct usb_interface *intf,
> > if (ignore_sniffer && id->driver_info & BTUSB_SNIFFER)
> > return -ENODEV;
> >
> > + if (id->driver_info & BTUSB_ATH3012) {
> > + struct usb_device *udev = interface_to_usbdev(intf);
> > +
> > + /* Old firmware would otherwise let ath3k driver load
> > + * patch and sysconfig files */
> > + if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001)
> > + return -ENODEV;
> > + }
> > +
>
> Patch does no apply
>
> Applying: Bluetooth: Add Atheros AR3012 one PID/VID supported
> /home/padovan/p/linux-trees/bluetooth-next-2.6/.git/rebase-apply/patch:14: trailing whitespace.
>
> /home/padovan/p/linux-trees/bluetooth-next-2.6/.git/rebase-apply/patch:15: trailing whitespace.
> /* New firmware with patch and sysconfig files already loaded */
> /home/padovan/p/linux-trees/bluetooth-next-2.6/.git/rebase-apply/patch:16: trailing whitespace.
> if (le16_to_cpu(udev->descriptor.bcdDevice) > 0x0001)
> /home/padovan/p/linux-trees/bluetooth-next-2.6/.git/rebase-apply/patch:17: trailing whitespace.
> return -ENODEV;
> /home/padovan/p/linux-trees/bluetooth-next-2.6/.git/rebase-apply/patch:18: trailing whitespace.
Heh, your patch is in base64, hence why it does not apply. Resend it using
git-send-email, please.
Gustavo
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
