OK I have just installed the last Debian squeeze and :
-bluez (with the 'bluetoothd' daemon)
-pulseaudio (with the 'pulseaudio' daemon)
My audio works correctly with a normal headset.
My audio doesn't work with a bluetooth headset.
The 2 daemons are running :
$ ps aux
[...]
root 2368 0.0 0.1 4064 1932 ? Ss 22:57 0:00 /usr/sbin/bluetoothd
[...]
1000 3592 1.0 0.3 96388 3924 ? Ssl 23:58 0:00 pulseaudio --start
[...]
This is my ALSA configuration file :
$ cat ~/.asoundrc
pcm.bluetooth_hw {
type bluetooth
device 00:1E:7C:01:0A:5E
profile "auto"
}
pcm.bluetooth {
type plug
slave {
pcm "bluetooth_hw"
}
}
And this is my device :
$ hcitool scan
Scanning ...
00:1E:7C:01:0A:5E Philips SHB9000
My bluetooth headset is not bound at all with my computer.
Can you tell me what I must do now to make my bluetooth headset working?
On Tue, 14 Jun 2011 16:07:43 +0300
Luiz Augusto von Dentz <luiz.dentz@xxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Jun 14, 2011 at 3:17 PM, YuGiOhJCJ Mailing-List
> <yugiohjcj-mailinglist@xxxxxxxxxxx> wrote:
> >
> > Hello,
> >
> > It's me again, I try new ways to use my bluetooth headset Philips SHB9000 on Linux but it failed.
> >
> > My bluetooth headset is Philips SHB9000 :
> > $ hcitool scan
> > Scanning ...
> > 00:1E:7C:01:0A:5E Philips SHB9000
> >
> > I use bluez 4.94. I found 4 tools (hcitool, rfcomm, a2dpd and sdptool) to use my bluetooth headset but each tool failed.
> >
> > When I try to bind with hcitool my computer with my headset, it failed :
> > $ hcitool dev
> > Devices:
> > hci0 00:22:43:B7:BB:F0
> > $ sudo hcitool cc 00:1E:7C:01:0A:5E
> > $ hcitool con
> > Connections:
> > As you can see, there is no connections...
> >
> > When I try to bind with rfcomm my computer with my headset, it failed :
> > $ rfcomm
> > rfcomm0: 00:1E:7C:01:0A:5E channel 0 clean
> > $ sudo rfcomm release hci0
> > $ rfcomm
> > $ sudo rfcomm -A -E bind 00:22:43:B7:BB:F0 00:1E:7C:01:0A:5E
> > $ rfcomm
> > rfcomm0: 00:1E:7C:01:0A:5E channel 1 clean
> > $ sudo rfcomm -A -E connect 00:22:43:B7:BB:F0 00:1E:7C:01:0A:5E
> > Can't connect RFCOMM socket: Operation now in progress
> >
> > When I try to bind with a2dpd my computer with my headset, it failed :
> > $ sudo a2dpd
> > A2DPD[14:19:26.370]: init_ipc: Selected IPC: unix, addr=127.0.0.1, bcst=127.0.0.255, port=21453
> > A2DPD[14:19:26.370]: main: a2dpd [Jun 13 2011 13:46:06] starting ...
> > A2DPD[14:19:26.371]: main: (errno=9:Bad file descriptor)a2dpd addr=00:1E:7C:01:0A:5E timer=0 us [Jun 13 2011 13:46:06]
> > A2DPD[14:19:26.371]: a2dpd_signal_init: Getting on DBUS
> > A2DPD[14:19:26.373]: a2dpd_signal_init: Installing watch
> > A2DPD[14:19:26.373]: add_dbus_watch: Added watch 0 0x8d67858 disabled
> > A2DPD[14:19:26.373]: add_dbus_watch: Added watch 1 0x8d67880 enabled
> > A2DPD[14:19:26.373]: a2dpd_signal_init: Registering object path: /com/access/a2dpd
> > A2DPD[14:19:26.374]: a2dpd_signal_init: Acquiring service: com.access.a2dpd
> > A2DPD[14:19:26.375]: a2dpd_signal_init: OK
> > A2DPD[14:19:26.375]: a2dpd_signal_init: OK
> > A2DPD[14:19:26.375]: a2dpd_register_sdp: Start
> > A2DPD[14:19:26.375]: add_avrtg:
> > A2DPD[14:19:26.375]: add_a2source:
> > A2DPD[14:19:26.376]: a2dpd_register_sdp: OK
> > A2DPD[14:19:26.376]: main_loop:
> > A2DPD[14:19:26.376]: make_server_socket:
> > A2DPD[14:19:26.376]: a2dpd_signal_state: Started 00:1E:7C:01:0A:5E
> > A2DPD[14:19:26.376]: bta2dpdevicenew:
> > A2DPD[14:19:26.377]: a2dpd_signal_address_changed: 00:1E:7C:01:0A:5E
> > A2DPD[14:19:26.377]: a2dpd_signal_set_socket: Signal socket set to 7
> > A2DPD[14:19:26.379]: a2dpd_signal_state: Disconnected
> > A2DPD[14:19:26.379]: a2dp_alloc:
> > A2DPD[14:19:26.379]: a2dp_alloc: (a2dp = 0x8d6b2e0)
> > A2DPD[14:19:26.379]: a2dp_new: 00:1E:7C:01:0A:5E, 44100
> > A2DPD[14:19:26.379]: a2dp_new: State AVDTP_STATE_DISCONNECTED
> > A2DPD[14:19:26.380]: alsa_new:
> > A2DPD[14:19:26.380]: alsa_new: device=plughw:0,0, framerate=44100
> > A2DPD[14:19:26.380]: alsa_new: State ALSA_STATE_DISCONNECTED
> > A2DPD[14:19:26.380]: alsa_new: returning 0x8d6d478
> > A2DPD[14:19:26.380]: sco_new:
> > A2DPD[14:19:26.380]: sco_new: State SCO_STATE_DISCONNECTED
> > A2DPD[14:19:26.380]: sco_state_disconnect: Filtering state : already disconnected
> > A2DPD[14:19:26.380]: main_loop: Bluetooth Device Settings [44100 hz, 2 channels, 16 bits]
> > A2DPD[14:19:26.381]: avrcp_new: Listening for AVRCP on socket 9
> > A2DPD[14:19:26.382]: avrcp_new: 0x8d6d588
> > I have no error but it doesn't work.
> >
> > When I try to bind with sdptool my computer with my headset, it failed :
> > $ sdptool browse 00:1E:7C:01:0A:5E
> > Browsing 00:1E:7C:01:0A:5E ...
> > But if I give an other address, there is an error, so the headset is found :
> > $ sdptool browse 00:1E:7C:01:0A:5F
> > Failed to connect to SDP server on 00:1E:7C:01:0A:5F: Host is down
> >
> > I read documentation[1][2][3][4][5][6][7][8][9] but I can't find a way to use my headset on Linux. Can you help me with my bluetooth headset on linux, please?
> >
> > Thank you.
> >
> > [1]http://bluetooth-alsa.sourceforge.net/build.html
> > [2]http://www.linux.ie/articles/bluetoothheadset.php
> > [3]http://forums.overclockers.com.au/showthread.php?t=694010
> > [4]https://help.ubuntu.com/community/BluetoothAudio
> > [5]http://gablog.eu/online/node/80
> > [6]http://forums.debian.net/viewtopic.php?t=12497
> > [7]http://penguincopter.blogspot.com/2009/07/linux-bluetooth-komorka-internet.html
> > [8]http://forums.opensuse.org/english/get-technical-help-here/multimedia/446585-bluetooth-audio-alsa-phonon-kde.html
> > [9]http://blog.bulix.org/index.php/blog/1008
>
> Those are all old components to use an a2dp device with linux, a2dpd
> is no longer needed nowadays you basically need bluetoothd (signaling)
> and PulseAudio (streaming). There was some announcement on bluez.org
> back on 2008 about this integration as you can see it here
> http://www.bluez.org/bluez-and-pulseaudio/, there is also some support
> to use with gstreamer and alsa (not recommended). Also note that with
> recent Linux distribution this should work without much effort e.g
> gnome you basically need to pair, connect and set the headset as
> default output.
>
> --
> Luiz Augusto von Dentz
> Computer Engineer
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
