Proposed DBus API extension is: - org.bluez.MediaEndpoint.ClearConfiguration(transport_path): Destroy stream associated with transport - org.bluez.MediaEndpoint.ClearConfiguration(remote_endpoint_path): Destroy all streams associated with endpoint - org.bluez.MediaEndpoint.SelectProperties(remote_endpoint_path): Destroy streams of endpoint, and re-run same unicast configuration as on initial connect, which invokes SelectProperties() callbacks on sound server and it can return new configuration it wants. For future: - org.bluez.MediaEndpoint.SetConfiguration(...): I think how this already works for broadcast is good: one call creates one new stream. Unicast should be changed to work exactly the same way. This allows for more detailed control of the configuration than SelectProperties(), and sound server can use it if it wants to deal with the different ASE configurations by itself. - We will need to figure out how to handle devices rejecting ASE configurations on Config Codec or Enable. Whose responsibility is it to try a different configuration, if the current configuration is rejected by device? Example: Sony Linkbuds S has 48kHz sink & 48kHz source PACs. However, it does not support the duplx configuration with both 48kHz sink and 48kHz source ASE -- it rejects that in Enable. It does support 32 kHz sink + 32kHz source duplex configuration. AFAICS it is not possible to know which combinations of sinks & sources are possible, except trying them one by one. How do we handle this? Unicast works with this Pipewire branch (can reconfigure to sink/source/duplex): https://gitlab.freedesktop.org/pvir/pipewire/-/tree/bap-codec-switch-select (With device sets, each device needs to be switched separately. Some more work is needed to make reconfiguration while CIG is active to work correctly, sound server must release transports before reconfiguring.) Broadcast has not been tested at all. Pauli Virtanen (9): org.bluez.MediaEndpoint: removing BAP streams with ClearConfiguration org.bluez.MediaEndpoint: add client role SelectProperties bap: add and use chainable future abstraction bap: use futures for select operation shared/bap: bap_abort_stream_req() should cancel also current req shared/bap: make sure ucast client stream is destroyed after releasing bap: support removing streams with ClearConfiguration() bap: do not try QoS before links are updated & io created bap: implement client role SelectProperties() doc/org.bluez.MediaEndpoint.rst | 27 ++ profiles/audio/bap.c | 533 ++++++++++++++++++++++++++------ profiles/audio/transport.c | 17 + profiles/audio/transport.h | 1 + src/shared/bap.c | 39 ++- 5 files changed, 522 insertions(+), 95 deletions(-) -- 2.48.1