NXP bluetooth controller may have GPIO pins used and routed for `WAKE_IN`
and `WAKE_OUT`, such pin info must be known so that the driver is can
configure the controller's firmware accordingly.
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
.../bindings/net/bluetooth/nxp,88w8987-bt.yaml | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
index 0a2d7baf5db3..04f55fac42ce 100644
--- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
+++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml
@@ -40,6 +40,16 @@ properties:
Host-To-Chip power save mechanism is driven by this GPIO
connected to BT_WAKE_IN pin of the NXP chipset.
+ nxp,wakein-pin:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description:
+ The GPIO number of the NXP chipset used for BT_WAKE_IN.
+
+ nxp,wakeout-pin:
+ $ref: /schemas/types.yaml#/definitions/uint8
+ description:
+ The GPIO number of the NXP chipset used for BT_WAKE_OUT.
+
required:
- compatible
@@ -54,5 +64,7 @@ examples:
fw-init-baudrate = <3000000>;
firmware-name = "uartuart8987_bt_v0.bin";
device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ nxp,wakein-pin = /bits/ 8 <18>;
+ nxp,wakeout-pin = /bits/ 8 <19>;
};
};
--
2.34.1
