[PATCH] Bluetooth: btusb: Add new VID/PID 13d3/3610 for MT7922

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A new machine has a Archer AX3000 / TX55e in it,
and out the box reported issues resetting hci0. It looks like
this is a MT7922 from the lspci output, so treat it as a MediaTek
device and use the proper callbacks. With that in place an xbox
controller can be used without issue as seen below:

    [    7.047388] Bluetooth: hci0: HW/SW Version: 0x008a008a, Build Time: 20241106163512
    [    9.583883] Bluetooth: hci0: Device setup in 2582842 usecs
    [    9.583895] Bluetooth: hci0: HCI Enhanced Setup Synchronous Connection command is advertised, but not supported.
    [    9.644780] Bluetooth: hci0: AOSP extensions version v1.00
    [    9.644784] Bluetooth: hci0: AOSP quality report is supported
    [  876.379876] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input27
    [  876.380215] hid-generic 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7
    [  876.429368] input: Xbox Wireless Controller as /devices/virtual/misc/uhid/0005:045E:0B13.0006/input/input28
    [  876.429423] microsoft 0005:045E:0B13.0006: input,hidraw3: BLUETOOTH HID v5.15 Gamepad [Xbox Wireless Controller] on c0:bf:be:27:de:f7

lspci output:

    root@livingroom:/home/ajhalaney/git# lspci
    ...
    05:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter

and USB device:

    root@livingroom:/home/ajhalaney/git# cat /sys/kernel/debug/usb/devices
    ...
    T:  Bus=01 Lev=01 Prnt=01 Port=10 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
    D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
    P:  Vendor=13d3 ProdID=3610 Rev= 1.00
    S:  Manufacturer=MediaTek Inc.
    S:  Product=Wireless_Device
    S:  SerialNumber=000000000
    C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
    A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
    I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
    E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
    I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
    I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
    I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
    I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
    I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
    I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
    I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
    I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
    E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
    E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us

Signed-off-by: Andrew Halaney <ajhalaney@xxxxxxxxx>
---
I'm mostly following similar patterns here to set this up, and
am not sure how to validate the WIDEBAND setting is appropriate
(but based on the other entry it seems it should be).

Thanks,
Andrew
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 279fe6c115fac51dd941eee2d496392917e083cd..ce534c212431157a382fce75f2b6657b6c9c6c96 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -610,6 +610,8 @@ static const struct usb_device_id quirks_table[] = {
 	/* MediaTek MT7922 Bluetooth devices */
 	{ USB_DEVICE(0x13d3, 0x3585), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3610), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 
 	/* MediaTek MT7922A Bluetooth devices */
 	{ USB_DEVICE(0x0489, 0xe0d8), .driver_info = BTUSB_MEDIATEK |

---
base-commit: 8155b4ef3466f0e289e8fcc9e6e62f3f4dceeac2
change-id: 20241224-tx55e-bluetooth-3a35440b0307

Best regards,
-- 
Andrew Halaney <ajhalaney@xxxxxxxxx>





[Index of Archives]     [Bluez Devel]     [Linux Wireless Networking]     [Linux Wireless Personal Area Networking]     [Linux ATH6KL]     [Linux USB Devel]     [Linux Media Drivers]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Big List of Linux Books]

  Powered by Linux