On Tue, Dec 10, 2024 at 11:16:33PM +0800, Cheng Jiang wrote: > Expand the firmware-name property to specify the names of NVM and > rampatch firmware to load. This update will support loading specific > firmware (nvm and rampatch) for certain chips, like the QCA6698 > Bluetooth chip, which shares the same IP core as the WCN6855 but has > different RF components and RAM sizes, requiring new firmware files. > > We might use different connectivity boards on the same platform. For > example, QCA6698-based boards can support either a two-antenna or > three-antenna solution, both of which work on the sa8775p-ride platform. > Due to differences in connectivity boards and variations in RF > performance from different foundries, different NVM configurations are > used based on the board ID. > > So In firmware-name, if the NVM file has an extension, the NVM file will > be used. Otherwise, the system will first try the .bNN (board ID) file, > and if that fails, it will fall back to the .bin file. > > Possible configurations: > firmware-name = "QCA6698/hpnv21.bin", "QCA6698/hpbtfw21.tlv"; > firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv"; > firmware-name = "QCA6698/hpnv21.bin"; > > Signed-off-by: Cheng Jiang <quic_chejiang@xxxxxxxxxxx> > --- > .../bindings/net/bluetooth/qualcomm-bluetooth.yaml | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml > index 7bb68311c..2782d2325 100644 > --- a/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml > +++ b/Documentation/devicetree/bindings/net/bluetooth/qualcomm-bluetooth.yaml > @@ -101,7 +101,10 @@ properties: > max-speed: true > > firmware-name: > - description: specify the name of nvm firmware to load > + description: > + If one item is present, specify the name of the NVM firmware to load. > + If two items are present, the first item specifies the name of the NVM, > + and the second specifies the name of the rampatch firmware to load. Don't repeat constraints in free form text. Use proper constraints so you can validate your DTS. And then actually do validate your DTS... Best regards, Krzysztof
