On Thu, Nov 28, 2024 at 08:09:19PM +0800, Cheng Jiang wrote: > QCA6698 chipset shares the same IP core as the WCN6855. However, > it has different RF components and RAM sizes, so new firmware > is needed. > > This change allows driver to distinguish it from the WCN6855 > and load the specific firmware. As the RF performance of > QCA6698 chip from different foundries may vary. Therefore use > different NVM to configure them based on board ID. > > Cheng Jiang (3): > arm64: dts: qcom: sa8775p-ride: Change the BT node > dt-bindings: net: Add QCA6698 Bluetooth > Bluetooth: btqca: Add QCA6698 support Order is totally incorrect: - dt bindings - driver changes - DTS > > .../net/bluetooth/qualcomm-bluetooth.yaml | 2 + > arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 2 +- > drivers/bluetooth/btqca.c | 47 ++++++++++++++++++- > drivers/bluetooth/btqca.h | 1 + > drivers/bluetooth/hci_qca.c | 36 +++++++++++++- > 5 files changed, 84 insertions(+), 4 deletions(-) > > > base-commit: f486c8aa16b8172f63bddc70116a0c897a7f3f02 > -- > 2.25.1 > -- With best wishes Dmitry
