[PATCH v1] Bluetooth: hci_uart: fix race during initialization

[Arseniy Krasnov <avkrasnov@xxxxxxxxxxxxxxxxx>]

'hci_register_dev()' calls power up function, which is executed by
kworker - 'hci_power_on()'. This function does access to bluetooth chip
using callbacks from 'hci_ldisc.c', for example 'hci_uart_send_frame()'.
Now 'hci_uart_send_frame()' checks 'HCI_UART_PROTO_READY' bit set, and
if not - it fails. Problem is that 'HCI_UART_PROTO_READY' is set after
'hci_register_dev()', and there is tiny chance that 'hci_power_on()' will
be executed before setting this bit. In that case HCI init logic fails.

Patch adds one more bit in addition to 'HCI_UART_PROTO_READY' which
allows to perform power up logic without original bit set.

Signed-off-by: Arseniy Krasnov <avkrasnov@xxxxxxxxxxxxxxxxx>
---
 drivers/bluetooth/hci_ldisc.c | 19 ++++++++++++++-----
 drivers/bluetooth/hci_uart.h  |  1 +
 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 30192bb083549..2e20f00649bd7 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -102,7 +102,8 @@ static inline struct sk_buff *hci_uart_dequeue(struct hci_uart *hu)
 	if (!skb) {
 		percpu_down_read(&hu->proto_lock);
 
-		if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+		if (test_bit(HCI_UART_PROTO_READY, &hu->flags) ||
+		    test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 			skb = hu->proto->dequeue(hu);
 
 		percpu_up_read(&hu->proto_lock);
@@ -124,7 +125,8 @@ int hci_uart_tx_wakeup(struct hci_uart *hu)
 	if (!percpu_down_read_trylock(&hu->proto_lock))
 		return 0;
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags))
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 		goto no_schedule;
 
 	set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state);
@@ -278,7 +280,8 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
 
 	percpu_down_read(&hu->proto_lock);
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags)) {
 		percpu_up_read(&hu->proto_lock);
 		return -EUNATCH;
 	}
@@ -582,7 +585,8 @@ static void hci_uart_tty_wakeup(struct tty_struct *tty)
 	if (tty != hu->tty)
 		return;
 
-	if (test_bit(HCI_UART_PROTO_READY, &hu->flags))
+	if (test_bit(HCI_UART_PROTO_READY, &hu->flags) ||
+	    test_bit(HCI_UART_PROTO_INIT, &hu->flags))
 		hci_uart_tx_wakeup(hu);
 }
 
@@ -608,7 +612,8 @@ static void hci_uart_tty_receive(struct tty_struct *tty, const u8 *data,
 
 	percpu_down_read(&hu->proto_lock);
 
-	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) {
+	if (!test_bit(HCI_UART_PROTO_READY, &hu->flags) &&
+	    !test_bit(HCI_UART_PROTO_INIT, &hu->flags)) {
 		percpu_up_read(&hu->proto_lock);
 		return;
 	}
@@ -704,12 +709,16 @@ static int hci_uart_set_proto(struct hci_uart *hu, int id)
 
 	hu->proto = p;
 
+	set_bit(HCI_UART_PROTO_INIT, &hu->flags);
+
 	err = hci_uart_register_dev(hu);
 	if (err) {
 		return err;
 	}
 
 	set_bit(HCI_UART_PROTO_READY, &hu->flags);
+	clear_bit(HCI_UART_PROTO_INIT, &hu->flags);
+
 	return 0;
 }
 
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 00bf7ae82c5b7..39f39704be41f 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -89,6 +89,7 @@ struct hci_uart {
 #define HCI_UART_REGISTERED		1
 #define HCI_UART_PROTO_READY		2
 #define HCI_UART_NO_SUSPEND_NOTIFIER	3
+#define HCI_UART_PROTO_INIT		4
 
 /* TX states  */
 #define HCI_UART_SENDING	1
-- 
2.30.1