The RTL8852BE-VT supports USB alternate setting 6.
However, its descriptor does not report this capability to the host.
Therefore, a quirk is needed to bypass the RTL8852BE-VT's descriptor
and allow it to use USB ALT 6 directly.
Signed-off-by: Hilda Wu <hildawu@xxxxxxxxxxx>
---
drivers/bluetooth/btrtl.c | 3 ++
drivers/bluetooth/btrtl.h | 1 +
drivers/bluetooth/btusb.c | 89 ++++++++++++++++++++++++++++++---------
3 files changed, 73 insertions(+), 20 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c
index 0bcb44cf7b31..b75f0b36a09b 100644
--- a/drivers/bluetooth/btrtl.c
+++ b/drivers/bluetooth/btrtl.c
@@ -1312,6 +1312,9 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev)
btrtl_dev->project_id == CHIP_ID_8852C)
set_bit(HCI_QUIRK_USE_MSFT_EXT_ADDRESS_FILTER, &hdev->quirks);
+ if (btrtl_dev->project_id == CHIP_ID_8852BT)
+ btrealtek_set_flag(hdev, REALTEK_ALT6_FORCE);
+
hci_set_aosp_capable(hdev);
break;
default:
diff --git a/drivers/bluetooth/btrtl.h b/drivers/bluetooth/btrtl.h
index a2d9d34f9fb0..ffec2fca88ec 100644
--- a/drivers/bluetooth/btrtl.h
+++ b/drivers/bluetooth/btrtl.h
@@ -105,6 +105,7 @@ struct rtl_vendor_cmd {
enum {
REALTEK_ALT6_CONTINUOUS_TX_CHIP,
+ REALTEK_ALT6_FORCE,
__REALTEK_NUM_FLAGS,
};
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 514d593923ad..eca0b173232e 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -804,6 +804,7 @@ struct qca_dump_info {
#define BTUSB_USE_ALT3_FOR_WBS 15
#define BTUSB_ALT6_CONTINUOUS_TX 16
#define BTUSB_HW_SSR_ACTIVE 17
+#define BTUSB_ALT_CHANGED 18
struct btusb_data {
struct hci_dev *hdev;
@@ -2130,16 +2131,61 @@ static void btusb_notify(struct hci_dev *hdev, unsigned int evt)
}
}
+static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
+ int alt)
+{
+ struct usb_interface *intf = data->isoc;
+ int i;
+
+ BT_DBG("Looking for Alt no :%d", alt);
+
+ if (!intf)
+ return NULL;
+
+ for (i = 0; i < intf->num_altsetting; i++) {
+ if (intf->altsetting[i].desc.bAlternateSetting == alt)
+ return &intf->altsetting[i];
+ }
+
+ return NULL;
+}
+
static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
{
struct btusb_data *data = hci_get_drvdata(hdev);
struct usb_interface *intf = data->isoc;
struct usb_endpoint_descriptor *ep_desc;
+ struct usb_host_interface *alt;
int i, err;
if (!data->isoc)
return -ENODEV;
+ /* For some Realtek chips, they actually have the altsetting 6, but its
+ * altsetting descriptor is not exposed. We can activate altsetting 6 by
+ * replacing the altsetting 5.
+ */
+ if (altsetting == 6 && !btusb_find_altsetting(data, 6) &&
+ btrealtek_test_flag(hdev, REALTEK_ALT6_FORCE)) {
+ alt = NULL;
+ for (i = 0; i < intf->num_altsetting; i++) {
+ if (intf->altsetting[i].desc.bAlternateSetting == 5) {
+ alt = &intf->altsetting[i];
+ break;
+ }
+ }
+ if (alt) {
+ for (i = 0; i < alt->desc.bNumEndpoints; i++) {
+ ep_desc = &alt->endpoint[i].desc;
+ if (usb_endpoint_is_isoc_out(ep_desc) ||
+ usb_endpoint_is_isoc_in(ep_desc))
+ ep_desc->wMaxPacketSize = 63;
+ }
+ alt->desc.bAlternateSetting = 6;
+ set_bit(BTUSB_ALT_CHANGED, &data->flags);
+ }
+ }
+
err = usb_set_interface(data->udev, data->isoc_ifnum, altsetting);
if (err < 0) {
bt_dev_err(hdev, "setting interface failed (%d)", -err);
@@ -2151,6 +2197,27 @@ static inline int __set_isoc_interface(struct hci_dev *hdev, int altsetting)
data->isoc_tx_ep = NULL;
data->isoc_rx_ep = NULL;
+ /* Recover alt 5 desc if alt 0 is set. */
+ if (!altsetting && test_bit(BTUSB_ALT_CHANGED, &data->flags)) {
+ alt = NULL;
+ for (i = 0; i < intf->num_altsetting; i++) {
+ if (intf->altsetting[i].desc.bAlternateSetting == 6) {
+ alt = &intf->altsetting[i];
+ break;
+ }
+ }
+ if (alt) {
+ for (i = 0; i < alt->desc.bNumEndpoints; i++) {
+ ep_desc = &alt->endpoint[i].desc;
+ if (usb_endpoint_is_isoc_out(ep_desc) ||
+ usb_endpoint_is_isoc_in(ep_desc))
+ ep_desc->wMaxPacketSize = 49;
+ }
+ alt->desc.bAlternateSetting = 5;
+ clear_bit(BTUSB_ALT_CHANGED, &data->flags);
+ }
+ }
+
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
ep_desc = &intf->cur_altsetting->endpoint[i].desc;
@@ -2213,25 +2280,6 @@ static int btusb_switch_alt_setting(struct hci_dev *hdev, int new_alts)
return 0;
}
-static struct usb_host_interface *btusb_find_altsetting(struct btusb_data *data,
- int alt)
-{
- struct usb_interface *intf = data->isoc;
- int i;
-
- BT_DBG("Looking for Alt no :%d", alt);
-
- if (!intf)
- return NULL;
-
- for (i = 0; i < intf->num_altsetting; i++) {
- if (intf->altsetting[i].desc.bAlternateSetting == alt)
- return &intf->altsetting[i];
- }
-
- return NULL;
-}
-
static void btusb_work(struct work_struct *work)
{
struct btusb_data *data = container_of(work, struct btusb_data, work);
@@ -2269,7 +2317,8 @@ static void btusb_work(struct work_struct *work)
* MTU >= 3 (packets) * 25 (size) - 3 (headers) = 72
* see also Core spec 5, vol 4, B 2.1.1 & Table 2.1.
*/
- if (btusb_find_altsetting(data, 6))
+ if (btusb_find_altsetting(data, 6) ||
+ btrealtek_test_flag(hdev, REALTEK_ALT6_FORCE))
new_alts = 6;
else if (btusb_find_altsetting(data, 3) &&
hdev->sco_mtu >= 72 &&
--
2.34.1
