Add support for Amlogic HCI UART, including dt-binding, and Amlogic Bluetooth driver. Signed-off-by: Yang Li <yang.li@xxxxxxxxxxx> --- Changes in v3: - Updated the properties within the device tree binding file. - Remove the "antenna-number" property. - Performed code optimization for improved efficiency and readability. - Link to v2: https://lore.kernel.org/r/20240718-btaml-v2-0-1392b2e21183@xxxxxxxxxxx Changes in v2: - Introduce a regulator for powering up the Bluetooth chip instead of power sequencing. - Use the GPIO Consumer API to manipulate the GPIO pins instead of the legacy API. - Minor fixes. - Link to v1: https://lore.kernel.org/r/20240705-btaml-v1-0-7f1538f98cef@xxxxxxxxxxx --- Yang Li (3): dt-bindings: net: bluetooth: Add support for Amlogic Bluetooth Bluetooth: hci_uart: Add support for Amlogic HCI UART MAINTAINERS: Add an entry for Amlogic HCI UART (M: Yang Li) .../bindings/net/bluetooth/amlogic,w155s2-bt.yaml | 62 ++ MAINTAINERS | 7 + drivers/bluetooth/Kconfig | 12 + drivers/bluetooth/Makefile | 1 + drivers/bluetooth/hci_aml.c | 756 +++++++++++++++++++++ drivers/bluetooth/hci_ldisc.c | 8 +- drivers/bluetooth/hci_uart.h | 8 +- 7 files changed, 851 insertions(+), 3 deletions(-) --- base-commit: 2360f368524bb817b71bdd2efed53d0c3c3929ad change-id: 20240418-btaml-f9d7b19724ab Best regards, -- Yang Li <yang.li@xxxxxxxxxxx>
