On 05/07/2024 13:20, Yang Li via B4 Relay wrote:
> From: Yang Li <yang.li@xxxxxxxxxxx>
>
> This patch introduces support for Amlogic Bluetooth controller over
> UART. In order to send the final firmware at full speed. It is a pretty
> straight forward H4 driver with exception of actually having it's own
> setup address configuration.
>
> Co-developed-by: Ye He <ye.he@xxxxxxxxxxx>
Read submitting patches. Missing SoB.
> Signed-off-by: Yang Li <yang.li@xxxxxxxxxxx>
> ---
> drivers/bluetooth/Kconfig | 13 +
> +
> +static void aml_serdev_remove(struct serdev_device *serdev)
> +{
> + struct aml_serdev *amldev = serdev_device_get_drvdata(serdev);
> +
> + hci_uart_unregister_device(&amldev->serdev_hu);
> +}
> +
> +static const struct aml_device_data data_w155s2 __maybe_unused = {
> + .iccm_offset = 256 * 1024,
> +};
> +
> +static const struct aml_device_data data_w265s2 __maybe_unused = {
How this can be "maybe_unused" while it is referenced always? This is
buggy. Either everything in OF chain can be unused or not. Not half yes,
half not.
> + .iccm_offset = 384 * 1024,
> +};
> +
> +static const struct of_device_id aml_bluetooth_of_match[] = {
> + { .compatible = "amlogic,w155s2-bt", .data = &data_w155s2 },
> + { .compatible = "amlogic,w265s2-bt", .data = &data_w265s2 },
> + { /* sentinel */ },
> +};
> +
> +static struct serdev_device_driver aml_serdev_driver = {
> + .probe = aml_serdev_probe,
> + .remove = aml_serdev_remove,
> + .driver = {
> + .name = "hci_uart_aml",
> + .of_match_table = of_match_ptr(aml_bluetooth_of_match),
So now you have warnings... drop of_match_ptr.
Best regards,
Krzysztof
