Move btusb_recv_acl_mtk from btusb.c to btmtk.c which holds
vendor specific stuff and would make btusb.c clean.
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Signed-off-by: Chris Lu <chris.lu@xxxxxxxxxxxx>
---
drivers/bluetooth/btmtk.c | 33 +++++++++++++++++++++++++++++++++
drivers/bluetooth/btmtk.h | 7 +++++++
drivers/bluetooth/btusb.c | 34 +---------------------------------
3 files changed, 41 insertions(+), 33 deletions(-)
diff --git a/drivers/bluetooth/btmtk.c b/drivers/bluetooth/btmtk.c
index 3b00a13da235..57a14668a42b 100644
--- a/drivers/bluetooth/btmtk.c
+++ b/drivers/bluetooth/btmtk.c
@@ -929,6 +929,39 @@ int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id)
}
EXPORT_SYMBOL_GPL(btmtk_usb_subsys_reset);
+int btmtk_usb_recv_acl(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct btmtk_data *data = hci_get_priv(hdev);
+ u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
+
+ switch (handle) {
+ case 0xfc6f: /* Firmware dump from device */
+ /* When the firmware hangs, the device can no longer
+ * suspend and thus disable auto-suspend.
+ */
+ usb_disable_autosuspend(data->udev);
+
+ /* We need to forward the diagnostic packet to userspace daemon
+ * for backward compatibility, so we have to clone the packet
+ * extraly for the in-kernel coredump support.
+ */
+ if (IS_ENABLED(CONFIG_DEV_COREDUMP)) {
+ struct sk_buff *skb_cd = skb_clone(skb, GFP_ATOMIC);
+
+ if (skb_cd)
+ btmtk_process_coredump(hdev, skb_cd);
+ }
+
+ fallthrough;
+ case 0x05ff: /* Firmware debug logging 1 */
+ case 0x05fe: /* Firmware debug logging 2 */
+ return hci_recv_diag(hdev, skb);
+ }
+
+ return hci_recv_frame(hdev, skb);
+}
+EXPORT_SYMBOL_GPL(btmtk_usb_recv_acl);
+
int btmtk_usb_setup(struct hci_dev *hdev)
{
struct btmtk_data *btmtk_data = hci_get_priv(hdev);
diff --git a/drivers/bluetooth/btmtk.h b/drivers/bluetooth/btmtk.h
index 9cc4490e8ddb..b12629e2d67f 100644
--- a/drivers/bluetooth/btmtk.h
+++ b/drivers/bluetooth/btmtk.h
@@ -193,6 +193,8 @@ void btmtk_fw_get_filename(char *buf, size_t size, u32 dev_id, u32 fw_ver,
int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id);
+int btmtk_usb_recv_acl(struct hci_dev *hdev, struct sk_buff *skb);
+
int btmtk_usb_setup(struct hci_dev *hdev);
int btmtk_usb_shutdown(struct hci_dev *hdev);
@@ -241,6 +243,11 @@ static int btmtk_usb_subsys_reset(struct hci_dev *hdev, u32 dev_id)
return -EOPNOTSUPP;
}
+static int btmtk_usb_recv_acl(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ return -EOPNOTSUPP;
+}
+
static int btmtk_usb_setup(struct hci_dev *hdev)
{
return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index d61a1d02e3e3..5de50c835964 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -2690,38 +2690,6 @@ static int btusb_mtk_shutdown(struct hci_dev *hdev)
return btmtk_usb_shutdown(hdev);
}
-static int btusb_recv_acl_mtk(struct hci_dev *hdev, struct sk_buff *skb)
-{
- struct btusb_data *data = hci_get_drvdata(hdev);
- u16 handle = le16_to_cpu(hci_acl_hdr(skb)->handle);
-
- switch (handle) {
- case 0xfc6f: /* Firmware dump from device */
- /* When the firmware hangs, the device can no longer
- * suspend and thus disable auto-suspend.
- */
- usb_disable_autosuspend(data->udev);
-
- /* We need to forward the diagnostic packet to userspace daemon
- * for backward compatibility, so we have to clone the packet
- * extraly for the in-kernel coredump support.
- */
- if (IS_ENABLED(CONFIG_DEV_COREDUMP)) {
- struct sk_buff *skb_cd = skb_clone(skb, GFP_ATOMIC);
-
- if (skb_cd)
- btmtk_process_coredump(hdev, skb_cd);
- }
-
- fallthrough;
- case 0x05ff: /* Firmware debug logging 1 */
- case 0x05fe: /* Firmware debug logging 2 */
- return hci_recv_diag(hdev, skb);
- }
-
- return hci_recv_frame(hdev, skb);
-}
-
#ifdef CONFIG_PM
/* Configure an out-of-band gpio as wake-up pin, if specified in device tree */
static int marvell_config_oob_wake(struct hci_dev *hdev)
@@ -3827,7 +3795,7 @@ static int btusb_probe(struct usb_interface *intf,
hdev->set_bdaddr = btmtk_set_bdaddr;
set_bit(HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN, &hdev->quirks);
set_bit(HCI_QUIRK_NON_PERSISTENT_SETUP, &hdev->quirks);
- data->recv_acl = btusb_recv_acl_mtk;
+ data->recv_acl = btmtk_usb_recv_acl;
}
if (id->driver_info & BTUSB_SWAVE) {
--
2.18.0
