Add HW IDs for wireless module. These HW IDs are extracted from
Windows driver inf file. Note these HW IDs without official drivers,
still in testing phase. Thus, we update module HW ID and test
ensure consistent boot success.
Signed-off-by: Jiande Lu <jiande.lu@xxxxxxxxxxxx>
---
drivers/bluetooth/btusb.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 79aefdb3324d..62fc836f8afb 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -585,6 +585,20 @@ static const struct usb_device_id quirks_table[] = {
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
+ /* Additional MediaTek MT7920 Bluetooth devices */
+ { USB_DEVICE(0x0489, 0xe134), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x13d3, 0x3620), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x13d3, 0x3621), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x13d3, 0x3622), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
+
/* Additional MediaTek MT7921 Bluetooth devices */
{ USB_DEVICE(0x0489, 0xe0c8), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
@@ -685,6 +699,9 @@ static const struct usb_device_id quirks_table[] = {
{ USB_DEVICE(0x0489, 0xe113), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
+ { USB_DEVICE(0x0489, 0xe139), .driver_info = BTUSB_MEDIATEK |
+ BTUSB_WIDEBAND_SPEECH |
+ BTUSB_VALID_LE_STATES },
{ USB_DEVICE(0x13d3, 0x3602), .driver_info = BTUSB_MEDIATEK |
BTUSB_WIDEBAND_SPEECH |
BTUSB_VALID_LE_STATES },
--
2.18.0
