From: Uri Arev <me@xxxxxxxxxxxxx>
This fixes some CHECKs reported by the checkpatch script.
Issues reported in ath3k.c:
-------
ath3k.c
-------
CHECK: Please don't use multiple blank lines
+
+
CHECK: Blank lines aren't necessary after an open brace '{'
+static const struct usb_device_id ath3k_blist_tbl[] = {
+
CHECK: Alignment should match open parenthesis
+static int ath3k_load_firmware(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Alignment should match open parenthesis
+static int ath3k_get_version(struct usb_device *udev,
+ struct ath3k_version *version)
CHECK: Alignment should match open parenthesis
+static int ath3k_load_fwfile(struct usb_device *udev,
+ const struct firmware *firmware)
CHECK: Alignment should match open parenthesis
+ err = usb_bulk_msg(udev, pipe, send_buf, size,
+ &len, 3000);
CHECK: Unnecessary parentheses around 'len != size'
+ if (err || (len != size)) {
CHECK: Blank lines aren't necessary after an open brace '{'
+ switch (fw_version.ref_clock) {
+
CHECK: Alignment should match open parenthesis
+ snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
+ le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
CHECK: Alignment should match open parenthesis
+static int ath3k_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" not found",
+ ATH3K_FIRMWARE);
CHECK: Alignment should match open parenthesis
+ BT_ERR("Firmware file \"%s\" request failed (err=%d)",
+ ATH3K_FIRMWARE, ret);
total: 0 errors, 0 warnings, 14 checks, 540 lines checked
Signed-off-by: Uri Arev <me@xxxxxxxxxxxxx>
---
Changes in v2:
- Fix spelling mistake
- Fix gitlint errors
---
drivers/bluetooth/ath3k.c | 25 +++++++++++--------------
1 file changed, 11 insertions(+), 14 deletions(-)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 88262d3a9392..ce97b336fbfb 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -3,7 +3,6 @@
* Copyright (c) 2008-2009 Atheros Communications Inc.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -128,7 +127,6 @@ MODULE_DEVICE_TABLE(usb, ath3k_table);
* for AR3012
*/
static const struct usb_device_id ath3k_blist_tbl[] = {
-
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0489, 0xe04e), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe04d), .driver_info = BTUSB_ATH3012 },
@@ -202,7 +200,7 @@ static inline void ath3k_log_failed_loading(int err, int len, int size,
#define TIMEGAP_USEC_MAX 100
static int ath3k_load_firmware(struct usb_device *udev,
- const struct firmware *firmware)
+ const struct firmware *firmware)
{
u8 *send_buf;
int len = 0;
@@ -237,9 +235,9 @@ static int ath3k_load_firmware(struct usb_device *udev,
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(udev, pipe, send_buf, size,
- &len, 3000);
+ &len, 3000);
- if (err || (len != size)) {
+ if (err || len != size) {
ath3k_log_failed_loading(err, len, size, count);
goto error;
}
@@ -262,7 +260,7 @@ static int ath3k_get_state(struct usb_device *udev, unsigned char *state)
}
static int ath3k_get_version(struct usb_device *udev,
- struct ath3k_version *version)
+ struct ath3k_version *version)
{
return usb_control_msg_recv(udev, 0, ATH3K_GETVERSION,
USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
@@ -271,7 +269,7 @@ static int ath3k_get_version(struct usb_device *udev,
}
static int ath3k_load_fwfile(struct usb_device *udev,
- const struct firmware *firmware)
+ const struct firmware *firmware)
{
u8 *send_buf;
int len = 0;
@@ -310,8 +308,8 @@ static int ath3k_load_fwfile(struct usb_device *udev,
memcpy(send_buf, firmware->data + sent, size);
err = usb_bulk_msg(udev, pipe, send_buf, size,
- &len, 3000);
- if (err || (len != size)) {
+ &len, 3000);
+ if (err || len != size) {
ath3k_log_failed_loading(err, len, size, count);
kfree(send_buf);
return err;
@@ -425,7 +423,6 @@ static int ath3k_load_syscfg(struct usb_device *udev)
}
switch (fw_version.ref_clock) {
-
case ATH3K_XTAL_FREQ_26M:
clk_value = 26;
break;
@@ -441,7 +438,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
}
snprintf(filename, ATH3K_NAME_LEN, "ar3k/ramps_0x%08x_%d%s",
- le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
+ le32_to_cpu(fw_version.rom_version), clk_value, ".dfu");
ret = request_firmware(&firmware, filename, &udev->dev);
if (ret < 0) {
@@ -456,7 +453,7 @@ static int ath3k_load_syscfg(struct usb_device *udev)
}
static int ath3k_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
+ const struct usb_device_id *id)
{
const struct firmware *firmware;
struct usb_device *udev = interface_to_usbdev(intf);
@@ -505,10 +502,10 @@ static int ath3k_probe(struct usb_interface *intf,
if (ret < 0) {
if (ret == -ENOENT)
BT_ERR("Firmware file \"%s\" not found",
- ATH3K_FIRMWARE);
+ ATH3K_FIRMWARE);
else
BT_ERR("Firmware file \"%s\" request failed (err=%d)",
- ATH3K_FIRMWARE, ret);
+ ATH3K_FIRMWARE, ret);
return ret;
}
--
2.44.0
